Reviews Wheel Bolts Nuts

StanceMagic - 5mm Hubcentric 5x114.3 and 5x120 Wheel Spacers (64.1mm Bore) Compatible with Acura Honda ILX RL RSX TLX TL TSX MDX RLX Accord Civic Element Prelude S2000 CR-Z - 2pcs

  • StanceMagic Hubcentric Wheel Spacers fits vehicles with 5/114.3 (5/4.5") bolt pattern and 64.1mm Centerbore. Compatible with Acura CL, ILX, Integra Type R, NSX (Rear), RDX, RL, RSX, TL, TLX, TSX, MDX. Compatible with Honda 1998-2002 Accord (V6 Engine / 5-Lug Only), 2003-2021 Accord, 2006-2021 Civic, CR-V, CR-Z, Element, HR-V, Odyssey, Pilot, Prelude, S2000 (Rear). Check Year/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x114.3 / 5x120 | Hub Center Bore: 64.1mm | Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. This listing is for spacers only as pictured. [....
Check Stock

5mm Hubcentric 5x114.3 Wheel Spacers (66.1mm Bore) Compatible with Nissan Infiniti G35 G37 Q50 Q60 Q70 FX35 FX50 350z 370z Altima Maxima 300zx 240sx Rogue Sentra - Silver 66.2mm 2pcs

  • StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 5/114.3 (5/4.5") bolt pattern and 66.1mm Centerbore. Compatible with Nissan 95-98 240SX (non Base Model), 300ZX, 350Z, 370Z, 02-21 Altima, 89-21 Maxima, 03-19 Murano, 08-21 Rogue, 12-21 Sentra. Compatible with Infiniti FX35 FX45 FX50 G35 G37 I30 I35 J30 M45. Compatible with Infiniti Q45 Q50 Q60 Q70 QX60 QX70. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 66.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIAL &....
Check Stock

Crib Screws Parts Replacements - M6 Baby Bed Crib Bolts and Barrel Nuts for Furniture Bed Cot Bunk 16mm 20mm 30mm 40mm 45mm 50mm 55mm 70mm 75mm 85mm Crib Bolts

  • This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost 1 or 2 baby bed bolts or nuts, this kit is your choice. ..
  • This crib screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts and 3 size barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) and one free hex key..
  • Our crib screws bolts and nuts are universal, they are made of carbon steel, they are solid replacements parts for most cribs [but not for all cribs], beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. (for Woodwork Only).
  • Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
  • Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to confirm the right size you will need,.
Check Stock

2pcs 10mm 5x120 Hubcentric Wheel Spacers (72.6, 72.56 Bore) Compatible with BMW 128i 135i 318i 320i 325i 328i 335i M3 428i 435i M4 525i 528i 530i 535i M5 Z3 Z4 640i 645ci E36 E46 E90 E92 E93

  • StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 5/120 bolt pattern and 72.6mm Centerbore. Compatible with BMW E82 E88 128i 135i, 228i 235i M235i,E36 E46 E90 E92 F30 3-Series 328i 325i 330i 335i M3. Compatible with BMW 4-Series 428i 435i M4, E60 F10 5-series 525i 528i 530i 535i 550i M5, Z3 Z4, 640i 650i, 740i 750i. Compatible with BMW M4 M5 M6 X3 Z3 Z4 Z8. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 10mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheel bore needs to be no smaller than 72.6mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with Lip | Thickness: 10mm Wide | Bolt Pattern: 5x120 | Hub Center Bore: 72.6mm | Lip Diameter: 72.6mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Mach....
Check Stock

Crib Screws and Bolts Replacement Hardware Kit - Baby Bed Screws 85mm 75mm 70mm 55mm 50mm 45mm 40mm 30mm 20mm 16mm M6 Replacement Bolts Barrel Nuts for Baby Toddler Bed Crib Furniture

  • Crib blots and screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts + 3 sized barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) + one free hex key..
  • Our crib screws bolts and nuts are made of carbon steel, they are solid replacements parts for most cribs, beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. 【NOT for all cribs, Please Check Your Crib Assembly Instruction and Compare Bolt Sizes and Lengths to See if This Kit Will Work】.
  • This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost some bolts or nuts, this kit is your choice..
  • Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
  • Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to con....
Check Stock

KAX 5x5.5 Wheel Spacers, 2 Inch Thickness 108mm Bore M14x1.5 Studs 5 Lugs Center Bore, Fit for Adapter R-a-m 1500 2012-2019, R-a-m 1500 Classic 2019-2021, Pack of 4

  • 5 LUG WHEEL SPACERS PARAMATER: Set of 4, 2 inch Thickness, 5x5.5 PCD (Bolt Pattern), 108mm Hub Bore, M14x1.5 Studs. KAX Wheel Spacers are made from the best true T 6 billet aluminum, with heat-treated and hardened 10.9-grade bolts pre-installed. The anodized surface provides additional resistance to corrosion..
  • VEHICLE FITMENT: This wheel adapter set compatible with R-a-m 1500 2012-2019 , R-a-m 1500 Classic 2019-2021..
  • SAFETY & BENIFIT：Set of 4 High Quality Wheel Adapters/Spacers allow extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle. Wheel spacers also increase the vehicle's performance in terms of handling and traction. The further the wheel is from the hub assembly, the better its grip..
  • COMPLETE KIT with EASY INSTALLATION: KAX wheel spacer set includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers extend the wheels outward the vehicle giving it a more aggressive look, which also allows for large brake caliper installations or lifts/lowering kits..
  • PLEASE NOTE: Recheck your vehicle compatibility (Year/Make/Model) in the Product Description BEFORE buying these wheel spacers. We provide professional Technical Services. Please co....
Check Stock

2pcs 12mm (0.5 inch) 5x120 Hubcentric Wheel Spacers (72.6, 72.56 Bore) Black Compatible with BMW 135i 318i 320i 325i 328i 335i M3 428i 435i M4 525i 528i 530i 535i M5 Z3 Z4 640i 645ci E36 E46 E90 E92

  • StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 5/120 bolt pattern and 72.6mm Centerbore. Compatible with BMW E82 E88 128i 135i, 228i 235i M235i,E36 E46 E90 E92 F30 3-Series 328i 325i 330i 335i M3. Compatible with BMW 4-Series 428i 435i M4, E60 F10 5-series 525i 528i 530i 535i 550i M5, Z3 Z4, 640i 650i, 740i 750i. Compatible with BMW M4 M5 M6 X3 Z3 Z4 Z8. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 1/2" (12mm) of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheel bore needs to be no smaller than 72.6mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with Lip | Thickness: 1/2" (12mm) Wide | Bolt Pattern: 5x120 | Hub Center Bore: 72.6mm | Lip Diameter: 72.6mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware Not Included. [MATERIAL & MANUFACTURI....
Check Stock

GAsupply 4×156 ATV Wheel Spacers, 2 inch 50mm 4 Lug Wheel Spacer Adapters 131mm Hub Bore 3/8\-24 Studs Compatible with Kawasaki, Polaris, Yamaha, 4pcs

  • 【Benefits】These wheel spacers are designed to move the wheel further out from the hub, gives your vehicle a more aggressive stance, allow for better handling characteristics & increases driving stability.
  • Mount larger wheel or tires, eliminate wheel/tire rubbing instantly..
  • 【Features】VLAOSCHI wheel spacers are made from FORGED 6061 T6 aerospace aluminum, CNC precisely machined, undergoes anodizing process to prevent surface corrosion and rust, with pre-installed heat treated 10.9 grade carbon steel studs..
  • 【Applications】4x156 Wheel Spacer with 3/8"-24 Lugs and Nuts, compatible with Polaris-Kawasaki 4 Lug vehicles: 1998-2009 Ranger, 2008-2012 RZR, 1999-2006 Diesel 4WD, 1999-2008 Sportsman 335 4WD, 2001-2011 Sportsman 400, 1996-2011 Sportsman 500, 2003-2011 Sportsman 600 4WD, 2002-2011 Sportsman 700 4WD, 2005-2011 Sportsman 800 4WD, 1996-2008 Xplorer 500, 1995-2000 300B Lakota, 1987-2006 KSF 250 Mojave, 1987-1988 KXT 250 Tecate 4.
  • 【Specifications】Pack of 4 Hubcentric Wheel Spacers. Thickness: 2" / 50mm | Vehicle Bolt Pattern: 4x156 mm | Wheel Bolt Pattern: 4x156 | Thread Pitch: 3/8"-24 studs & nuts | Center Bore: 131mm, with Lip..
  • 【Installation & Warranty】Easy bolt-on installation, no special tool needed. All VLAOSCHI products are cover....
Check Stock

StanceMagic 2pcs 5mm 5x120 Hubcentric Wheel Spacers (72.6mm Bore) Compatible with BMW 318i 320i 325i 328i 335i M3 428i 435i M4 525i 528i 530i 535i M5 Z3 Z4 640i 645ci E36 E46 E90 E92

  • StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 5/120 bolt pattern and 72.6mm Centerbore. Compatible with BMW E82 E88 128i 135i, 228i 235i M235i,E36 E46 E90 E92 F30 3-Series 328i 325i 330i 335i M3. Compatible with BMW 4-Series 428i 435i M4, E60 F10 5-series 525i 528i 530i 535i 550i M5, Z3 Z4, 640i 650i, 740i 750i. Compatible with BMW M4 M5 M6 X3 Z3 Z4 Z8. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x120 | Hub Center Bore: 72.6mm | Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. This listing is for spacers only as pictured. [MATERIAL &....
Check Stock