Reviews Welding Leveling Clamps

Mellcom CT520D Welding Machine 50Amp Plasma Cutter, 200Amp TIG Welder 3 in 1 Multifunctional TIG/MMA/Plasma Cutter, 110/ 220V Dual Voltage 1/2 Inch Clean Cut with LCD Display

  • USE MOS TRANSISTORS: The powerful electric welding machine performs better than IGBT welding at a lower voltage, and performs well in the high-frequency working section, and the frequency can reach more than 300kHZ. MOSFET power device with unique control mode improves the reliability of the welding machine..
  • SUPPORTS 3 WELDING MODES: Perfectly applied to the three electric welding functions of TIG/ MMA/ PLASMA, allow you to weld stainless steel, alloy steel, and carbon steel and other nonferrous metals. Connect the wires to different interfaces (operate according to the product manual) , Each welding mode can work effectively in 110V/220V voltage environment. This multifunctional electric welding machine meets various daily needs..
  • PORTABLE & USABLE TOOL: This welding & cutting equipment is small, compact in structure, and has excellent current output performance. Lightweight 32 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • WHAT YOU GET: We have equipped this electric welding machine with more excellent product accessories-1 x Argon arc welding torch, 1 x PT-31 cutting torch, 1 x 300A welding torch, 1 x 300A grounding clamp, 1 x Oil-water separator, 4 x Hose clamps, 2 x Copper streets, 2 x Nozz....
Check Stock

Forney 52867 Jumper Battery Cables, Heavy Duty Booster #4 with 500 Amp Clamps, 20-Feet,Black And Red

  • Made with premium #4 gauge copper welding cable.
  • Super heavy duty 500 amp clamps used on both ends of cable.
  • Forney 54722 are replacement 500 amp clamps.
  • The most reliable jumper cables you'll ever use.
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

10 Pack Hold Down Toggle Clamps Woodworking,201B Clamps Hand Tool Toggle Clamp 220Lbs Holding Capacity,Antislip Quick Release Horizontal Toggle Clamp,Heavy Duty Toggle Clamp for Cam Over Clamp-SKYCY

  • Quick Release Clamp:Cam clamp quick release toggle clamps for holdfast woodworking.Cam lever hold down clamp for cnc workholding clamps.Vertical clamp with non-slip oil and stain-resistant red vinyl solid handle is easy for woodworking clamps hand tool..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material: Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Size Spesifics : 5.90 * 3.74 * 1.41 inches. screw: M6 * 45..
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

5pack Hold Down Toggle Clamps Woodworking,201B Clamps for Woodworking,Vertical Clamp,Cam Clamp Quick Release Toggle Clamp for CNC Hold Down Clamps,200Lbs Heavy Duty Toggle Clamp for T Track Cam Action

  • Holdfast Clamp:Quick-release horizontal toggle clamps with rubber tips,cam lever hold down clamp for cnc workholding clamps.Quick release clamp with non-slip oil- and stain-resistant red vinyl solid handle is easy for woodworking clamps..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material : Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Clamp Spesifics: Whole size of clamp 201B 5.90"x3.74"x1.41".
  • Length of large toggle clamp foot including rubber 1.88".
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

Lippert Components 672136 Ground Control TT Kit

  • TIME-SAVING — In under three minutes, Ground Control TT will level and stabilize your travel, so you can have more time to enjoy your camping experience.
  • INNOVATIVE TECHNOLOGY — Engineered with Hall Effect technology that delivers more accurate, precise leveling for your RV, and it’s compatible with OneControl Technology.
  • DURABLE CONSTRUCTION — Built with heavy gauge steel and a powder-coat finish — when it comes to durability, this electric leveling system was made to withstand the elements and perform with efficiency, day after day.
  • FULLY EQUIPPED — This system comes complete with all mounting and installation hardware needed for an easy, bolt-on install with no welding required.
  • TOUCHPAD CONTROL — The 5-point system includes our touchpad controller that can be wall-mounted for easy operation.
Check Stock

HEIHAK 3 Packs 18 Inch Large C Clamp Locking Pliers with Swivel Pads, Heavy Duty Vice Grip Clamp Set, Adjustable Welding Clamps Tools for Woodworking Welding

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

4 Pack Heavy Duty Leveling Feet, Furniture Leg Adjustable Load Levelers Foot, Leveler for Workbench Cabinet Pool Table Bench Machine Feet (Pack of 4)

  • ...levelers can adjust the height of the furniture from 25/32″(2cm) to 3-17/32″(9cm) and the design of the tray bracket perfectly improves the stability of the furniture.(Note: Please refer to the third and sixth pictures for the specific size of the product.).
  • ✅ Installation Adjustment Kit:You will get 4 sets of leveling feet and 1pcs wrench. Suitable for using them in residential or working area, these furniture levelers are designed to fit most table, cabinet, and workbench..
  • ✅ Good Carrying Capacity：The base of the Tahikem workbench leveling feet is made of hard rubber, which has non-slip texture and will not damage your floor. The weight capacity of each leveling legs is 250 pounds, and when you use four together, the maximum weight is up to 1000 pounds..
  • ✅ Simple Installation: An electric drill or screwdriver is enough to complete all installations of the product. Now go to repair heavy furniture and install Tahikem adjustable leveling legs so that it will not shake and ruin your mood..
  • ✅ Quality Assurance: This heavy duty leveling feet is exclusively developed and designed by Tahikem, let it completely solve your worries about shaking furniture! We will provide 1-year quality assurance and 30-day full refund guarantee. If there is any p....
Check Stock

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

  • ...R PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
  • This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
  • 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
  • 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
  • 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
  • BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
  • Hex key adjustment screw for adjusting to the correct pressure.
  • Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
  • Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
  • Each wood working clamp comes lightly pre-oiled fo....
Check Stock