Reviews Welding Electrode Machinery

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

...istant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
cable set with terminal lugs and cable set with Dinse connectors..
Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
Heavy duty 300-amp stick electrode holder with strong jaw spring.
both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 (nominal cable area 35-50mm²)..
U.S. based welding and hardware supplier. Strong technical support with experienced customer ....

Great for most Arc, MMA, Hand Stick welding jobs.
Arc welding electrode holders with a comfortable insulated handle and easy to operate..
Used # 1 AWG Gauge Cable,The electrode holder is with highly conductivity and improved cable connections..
High quality electrode holder is with highly conductivity and improved cable connections..
Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet..

These 1/8" x 14" Aluminum Electrodes are for 4043 aluminum welding for flat, horizontal and vertical applications.
Aluminum welding for flat, horizontal and vertical applications..

1.300Amps Welding Electrode Holder American Style.
2.With 35-50 quick plug. Easy connected..
4.Applicable to use with MMA ARC Welders 120 200 250 Amp, Suit for various kinds of Welding Rods etc..
5. Pack of 1 PC 300A electrode holder with 35-50 quick plug 3M cable.

Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity..
Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc..
Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance..

PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode E6013 for stick welding carbon steel welding in metal fabrication, maintenance and repair works..
SPECIFICATION: AWS A5.1 ASME SFA 5.1/E6013. 60,000 psi min. yield strength. Core rod diameters and electrode lengths: 1/8" x 14" and 3/32" x 12". Typical deposited chemical composition (wt%): C=0.08, Mn=0.50, Si=0.40, P=0.015, S=0.012, Fe-balance..
FEATURES AND APPLICATIONS: Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Light to medium penetrating. Easy steady arc with excellent wetting and ease of operation. Smooth and flat beads with low spatter. Easy slag removal. For sheet metal, irregular short welds that change positions. Good for general, all-purpose applications and joints with poor fit-up. All-position welding..
PACKAGE: pack of 5-lb and 10-lb. With volume discount. Buy More Save More!.
U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..

...e better welding performance to the workpiece..
【MULTIFUNCTIONAL】This powerful welder has three functions of MIG welding, MAG welding and MMA welding. You can use it with CO2 gas, mixed gas or without gas. It’s suitable for welding sheet of low-carbon steel, alloyed steel and stainless steel..
【WELDING WIRE & ELECTRODE】This machine uses 2Lbs solid wire(0.030’’), 2Lbs flux cored wire(0.030’’), or basic electrodes with a diameter of 3/32’’-1/8’’..
【PORTABLE DESIGN】This welder features an easy carrying handle, compact design, easy for translation and storage. It’s suitable for moving jobs and working at height. It’s quite small, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
【COMPLETE PACKAGE】This model is supplied with full accessories with MIG torch, electrode holder with cable, earth clamp with cable, brush and mask. Ready to use! Note: The diameter of the contact tip of this welding torch is 0.8mm. If you use 1.0mm welding wire, you need to change the contact tip. (If you have any questions in use, please feel free to contact us. We will reply you within 24 hours.).

Can handle E6010 cellulose electrode, ideal for below 5/32 in.(4.0mm) welding rods.Up to 195A, applicable of welding mild steel, carbon steel, stainless steel and cast iron..
Built in Hot-start make the arc strik easier, Anti-stick can remove the electrode from the workpiece easily, Arc-force provide smoother welding and deeper penetration..
Equipped with multiple protection functions,such as over current protection, over load protection,temperature control..
Easy to operate for beginner , can read the output welding current with smart digital display..
Comes with a easy carrying handle easy for carry, can be used anywhere you need..

2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
Good effect of welding stainless steel, adequate for DC welding.
Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
Longer storage time, sealed vacuum packaging to avoid oxidation.