Reviews Welding Cable Adapter

JEGS TIG 200 Welder | 120V or 220V | Duty Cycle: 45% @ 180A @ 230V | Includes Hand-Held Mask, Wire Brush, Regulator, Ground Clamp & Cable, TIG Welding Torch, And Power Cord w/ 120V Adapter

  • OUT-OF-THE-BOX READY TO USE on many different welding applications.
  • ACCESSORIES INCLUDED: hand-held mask, wire brush, regulator, ground clamp & cable, TIG welding torch, and power cord w/ 120V adapter.
  • 120V OR 220V DESIGN to allow for a more universal plug-in power source.
  • YELLOW PAINTED FINISH WITH JEGS LOGO for great looks and long life.
Check Stock

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

  • This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
  • Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
  • Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
  • The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

Amico ARC-200, 5-200 Amp Stick Arc Lift-TIG Combo Welder, 100-250V Wide Voltage Welding, 80% Duty Cycle, Compatible with all Electrodes: E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
  • 5-200A comfortably welds thin stainless steel and other various metals..
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
Check Stock

4-AWG Heavy-Duty AC Power Inverter Custom Cable Kit USA Cobra CPI-1575

  • Model: COB-1575-WIRE-4-KIT MPN: Does Not Apply.
  • WIRE KIT COMES WITH: 10 FT OF #4 awg Black Welding Cable 10 FT OF #4 awg RED Welding Cable 8 Ft OF #6 awg Black Welding Cable.
  • Features: Temperature Rating -50° C to 105° C Ethylene Propylene Rubber (EPR) Annealed stranded bare copper per ASTM B-172 Ozone, sun, weather,.
  • Country/Region of Manufacture: United States Brand: AC/DC WIRE AND SUPPLY.
Check Stock

WayinTop RPi GPIO Breakout Expansion Kit for Raspberry Pi 4B 3B+ 3B 2B B+, T-Type GPIO Expansion Adapter Board + 830 Tie Points Solderless Breadboard + 40pin GPIO Flat Ribbon Cable + 65pcs Jumper Wire

  • ...ng, with self-adhesive tape on back and multiple links to buckle..
  • 【65pcs Flexible Jumper Cables】Flexible, durable, reusable, easy to connect and disconnect.
  • 4 Kinds of length: 12cm(49pcs), 16cm(8pcs), 20cm(4pcs), 24cm(4pcs).
  • these jumper cable wires can connect each other through the pin connection, do not need welding, can fit for fast circuit test..
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

Amico MIG-130A, 130 Amp MIG/Flux Cored Wire Gasless Welder, 110/230V Dual Voltage Welding Soldering Machine

  • MIG-130A adopts the most advanced IGBT inverter technology and has an excellent arc stability, which produces perfect welding effects. All projects can be completed effortlessly and quickly. The current, voltage, and wire feeding speed can be adjusted.
  • furthermore, the wire feeding speed can also be automatically matched according to the current. It is simple and easy to operate, which is very suitable for beginners and professionals alike..
  • MIG-130A has a beautiful appearance and incorporates exquisite production technology. It is manufactured in accordance with all industry standards. The output current is 130A at 110V and 220V. Both 0.030" and 0.035" flux-cored wires can be used. The machine is very light and has a user-friendly design, making welding work easy and perfect. This is an ideal machine for home maintenance, professional work, and every task you require..
  • With an intelligent power supply system, the welder can automatically detect the input voltage, which allows the machine to automatically adjust. You can also switch easily between 110V and 220V. Extending the power cord by 300 feet can also resist power fluctuations and cable attenuation. It is very suitable for difficult operations on construction sites, docks, agricultural sites and ....
Check Stock

RIOUSV Ethernet Splitter, RJ45 1 to 2 Ethernet Splitter Coupler Adapter Cable Suitable with Cat5, Cat5e, Cat6 LAN Ethernet Socket Connector Adapter (2 Pack)

  • ... same time, an 8-core cable (or 8-core cable embedded in the wall) needs to be connected between two RJ45 splitters when the router is far away from the computer, use this method, as illustrated in image 3..
  • Stable Transmission - This network splitter is made in thickened PCB Board. Needle core integrated mechanical welding, environment protection PVC surface makes the 1 to 2 way lan splitter robust and durable, which reduces daily wear-and-tear. RJ45 splitter connector can also safely use the network during thunderstorms. Ethernet cable splitter meets the performance requirements of cat5 / cat5e / cat6 network cables..
  • Note: One pair of RJ45 splitters must be used together to connect connect two devices to the network.(Installing and using this pair of adapters, pay attention to the port, port 1 corresponds to port 1 , port 2 to port 2, can't be reversed.).
Check Stock