Reviews Weld on Latch

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld Tabletop Epoxy Resin, 1 Gallon Kit, Cures Clear, Fast Cure Time, Minimal Bubbling, Scratch & Water Resistant

  • J-B WELD CLEARTOP: is a 1:1 mix ratio, crystal clear pour-on epoxy that provides a protective surface for all your projects. J-B Weld ClearTop is a self-leveling, high viscosity and solvent-free formula allowing for a safe, smooth and even finish on your project. J-B Weld ClearTop resist scratching, contact heat (up to 150oF) and impact! ClearTop can be mixed with dyes to add coloring to the Epoxy and be sanded after fully cured. The half gallon bottles have graduated marking on them to help make sure you measure even amount of Part A & B..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

IPS AAB4 Weld-On 1.25 oz Applicator Bottle with Needle

  • For use with Weld-on #3 and Weld-on #4 Acrylic Plastic Cement.
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz.

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey..
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water..
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Plast-aid Multipurpose Repair Plastic - 6 oz Kit

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be....
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml 2

  • J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be....
  • VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

J-B Weld Plastic Bonder Black 25ml Syringe - 2 Pack (50139-2), 25 ml - 2 Pack

  • J-B Weld Plasticbonder (Black): A Quick Setting And Multipurpose Two Part Urethane Adhesive & Gap Filling System That Provides A Strong And Lasting Bond To Many Plastic Surfaces J-B Weld Plasticbonder Is Great For Diy Plastic Repairs, Filling Dents, Bumper Repairs And More. J-B Weld Plasticbonder comes in Syringe allowing for a 1: 1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
  • Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Plasticbonder Takes 15 Minutes To Set And 30 Hours To Cure J-B Weld Plasticbonder Set And Cure Color Is Black..
  • Strength: J-B Weld Plasticbonder Has Tensile Strength Of 3770 PSI..
  • Surface Applications: Thermoset & Carbon Fiber Composites, Thermoplastics And Coated Metals, Plastic & Pvc, Concrete, Ceramic & Tile, Fiberglass, And Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, ....
Check Stock

PC Products PC-7 Epoxy Adhesive Paste, Two-Part Heavy Duty, 2oz in Two Jars, Charcoal Gray 27776

  • J-B WELD MINUTEWELD: A stronger and more permanent substitute to Super Glue J-B Weld MinuteWeld is an instant setting two part epoxy that will set in 1 minute under most temperature conditions J-B Weld MinuteWeld comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, MinuteWeld takes 1 minute to set and 1 hour to cure J-B Weld MinuteWeld set and cure color is clear.
  • STRENGTH: J-B Weld MinuteWeld has tensile strength of 2300 PSI.
  • SURFACE APPLICATIONS: Ceramic & Tile, Fiberglass, Plastic & PVC, Wood, Concrete, and Glass.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
Check Stock