Reviews Weld Steel Mesh Fence

Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

  • ◆【Fit for】 : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates..
  • ◆【Material】: The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck..
  • ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
Check Stock

Rocicmhy 48x100 Hardware Cloth 1/2 Inch 19Ga,Chicken Coop Wire,Hot Dipped Galvanized Wire Mesh Roll,Chicken Wire Fence Rolls,Welded Wire Fencing,Chicken Wire Fencing,Concrete Wire Mesh,Rabbit Wire

  • 【Durable & Suitable】:The 1/2 inch hardware cloth roll is made of low carbon steel wire and heavy duty Hot dipped Galvanized after welding,its structure is uniform mesh opening,easy to install , wear-resistant,corrosion resistance,rustproof and longer service life..
  • 【Multipurpose】: The wire mesh roll is easy to flat and also sturdy for making chicken coops,rabbits run,duck pen, window screen, chicken run, coops, rabbit fence, tree guards, drain gutter, soil sifters, garden raised bed, garden fence and form a grazing frame on fresh green grass. Also you can make some DIY sheep yards in your farm..
  • 【Perfect Size】: The Hot dipped galvanized hardware cloth has enough length 100feet (30.5meters) and enough width 4feet (1.22meters),also standard square aperture 1/2inch (12.7mm) & wire diameter 0.92mm..
  • 【High Safety】:Normally welded wire fence use the flexible galvanized welded wire mesh screen to build closed protect cages. It's effective to avoid your chickens, ducks, rabbits,other farmed animals and vegetables, tomatoes, strawberries suffering from snake,small critters such as voles, gopher etc entering into..
  • 【Free Gloves & Plier】: We enclose a pair of Glove and a piece of Plier with the hardware mesh,it's Free and also convenient for you....
Check Stock

MAPORCH Upgraded 16IN x 15FT Hardware Cloth Metal Chicken Wire Mesh with 1/4 Inch Galvanized Mesh 18 Gauge, Welded Wire Fencing for Vent, Rabbit Wire, Cabinets Mesh 5, Included 1 Wire Cutting Scissor

  • ✔ UPGRADED DESIGN: Differ from other products on the market, our galvanized steel mesh screen has evenly woven wire mesh structure, all woven nets of the mesh are carefully welded against slipping and splitting off. Our metal mesh is extremely sturdy, anti-rust, reusable and long service life. The holes are only 1/4 inch to keep critters out and the chickens, rabbit safe, protect your home, garden, fruits and vegetables from urgly animals..
  • ✔ PREMIUM MATERIAL: Made of industrial high standard galvanized steel resists Acid & alkali corrosion and generating a dense, strong adhesion, large inert oxide film on the surface combined with high temperature oxidation resistance up to 800℃. Moreover, this wire fencing is rectangle shaped and big enough to enable you to cut off any shape that you need with our cutting scissor (Included)..
  • ✔ ADJUSTABLE SIZE : Each wire mesh screen is 16" x 15FT, aperture 4.5mm, wire diameter 0.7mm. Our wire mesh is scrolled shape and bigger size than other brands that enables you to cut off any shape you need. With smart package and design allow you to easily straighten to the original flatted form. A lot of wire mesh rolls are normally curled up that makes you hard to reshape. It’s not happen to Maporch products..
Check Stock

Fox Alloy E71T-GS .030\ Flux Core Welding Wire Gasless Mig Wire - 2 Lbs Spool Welding Wire Mild Steel Filler Metal (0.8 mm)

  • 2-lb spool 0.030" gas-less E71T flux-cored ( FCW ) mild steel MIG welding wire with sturdy packaging, and comes with a 0.030'' contact tip.
  • Welding Wire E71T-GS conforms to AWS A5.20 (E71T-GS), AWS A5.36 (E71T14S-AZ-CS3), ISO 17632-A (T42 Z Z V N 1).
  • Flux core welding wire E71T-GS is self shield, no shielding gas needed, single-pass fillet and lap welding, all positional, low welding fume, minimum spatter,Smooth arc action,High feedability,Filler Metal welding wire is easy to weld in indoor and outdoor.
  • Mild steel welding wire E71T-GS is applied in welding of thin plate steel structure, i.e, doors， fence..
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

J-B Weld 8217 TankWeld Gas Tank Repair - 1 oz.,Dark Grey

  • J-B WELD TANKWELD: A hand mixable, steel reinforced two part epoxy putty stick that is formulated to repair and rebuild various holding tanks. J-B Weld TankWeld is chemical resistant against petroleum, hydraulic fluids and many other harsh chemicals once fully cured. TankWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, it takes 5 minutes to set and cures in 1 hour. J-B Weld TankWeld set and cure color is dark grey..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld TankWeld has lap shear strength of 900 PSI. TankWeld can be molded, shaped, sanded, drilled and tapped..
  • MAJOR USES: Fuel tanks, metal radiators, metal fuel or chemical tanks, metal housings and stripped threads. Surface applications include: iron, stainless steel, copper, brass, aluminum, and bronze..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Weld On Grab Chain Hook G70 3/8\ Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tow Tie Down Forged Steel Working Load Limit: 6600 lbs

  • Weld-on Type, Grab, Hook. Working load limit 6600 lb.. Size 3/8 inch, Grade 70, for use with 3/8 in chain.
  • The best hook-used for welding on the tractor bucket, it is very suitable for any field of use, and can be used with the following statements: weld on hooks weld chain hook weld on clevis weld-on clevis grab chain hooks weld tow hook weld hooks for buckets forks weld hook3/8 weld hook grab hooks 3/8weld on grab hook weldable hooks weldon hooks weld clevis hook 3/8weld on chain hooks.
  • Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors..
  • Material: Forged Steel，Package Includes:4pcs hooks.
  • Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort to provide customers with satisfactory service. Feel free contact us by emails if you have any problems..
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock

Drill, Hand - Electric Hand Drill: Drill Single Hole into Hard Wood Drills - Electric

  • REPLACeS THE COMMON WIRE FENCE STAPLES - Fast easy install with your favorite battery powered drill. No more smashed fingers, loose wires or hammering and pulling..
  • SAVES TIME AND MONEY - 35% Faster to Install, 4 x more holding power and 44% faster ro reuse (compared to traditional poulty wire fence staples)..
  • LONG LASTING - Manufactured in Taiwan from 14 gauge steel with a rust inhibiting coating. The toothed claw never slides and holds wire tight, even on older posts..
  • MANY USES AND REUSABLE - works great for wire fencing, chicken wire fencing, hardware cloth, barbed wire fence or catio wire mesh DIY projects..
  • 1.5" HARDWOODS VERSION DRIVER INCLUDED - Designed for use with Oak, Hedge, Hickory or Plastics. 1/4 inch hex driver included. Approximately 170 pieces per container..
Check Stock