Reviews Weathered Wood Filament

AMOLEN 3D Printer Filament, Ebony Wood PLA Filament 1.75mm, 3D Printing Filament with 20% Real Wood Fiber,1kg

  • REAL WOOD FIBER - There is 20% wood fiber in the ebony wood PLA Filament. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

Electric Fireplace White Transitional Veneer Wood Weathered Programmable Remote Control

  • Electric Fireplace White Transitional Veneer Wood Weathered Programmable Remote Control.
  • Design/Look : Transitional. Material : Veneer, Wood. Type : Freestanding. Finish : Weathered. Screen type : Glass. Assembly : Assembly Required. Color : White. Fuel type : Electric. Maximum heating output : Under 10,000 BTU's. Programmable, Remote Control.
  • Product Size: : 55.88 inches wide x 16 inches deep x 47.25 inches tall..
Check Stock

Creality Ender 3 Pro DIY 3D Printer with Removable Magnetic Bed and UL Certified Power Supply 8.6

  • Full manufacturer's warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians.
  • A sturdy metal frame that is substantially more stable than the Creator's original wood frame.Build volume 8.9 X 5.8 X 5.9 inches.
  • Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process.
  • Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP.
  • Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in].
  • Please refer the user manual below for better use.
Check Stock

Primitives by Kathy Classic Box Sign, 8 x 4-Inches, Enjoy The Little Things

  • Free stands on tabletop or hangs on wall for display.
Check Stock

Oldtown Farmhouse Metal & Solid Wood Noiseless Wall Clock (Mint White, 18-inch)

  • Hand sanded weathered white solid fir real wood.
  • weathered look mint rustic metal iron frame.
  • Noiseless silent non-ticking quartz movement.
  • AA battery required (not included) - recommends non-alkaline zinc carbon type "Heavy Duty" battery designed for low drain devices like clocks.
  • High quality quartz movement --003e Lifetime Warranty.
  • Note: This is a natural wood product, actual color may varies from picture, some clocks may also have natural wood knots holes, scratch marks, crack lines which adds to the rustic farmhouse coastal beach look..
Check Stock

SUNLU Wood PLA 3D Printer Filament, 1.75 PLA Filament Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75mm Wood fibers (Real Wood)

  • ① 【20% WOOD Fibers】SUNLU Upgrade Spool Wood PLA Filament is mixture of 20% recycle wood with polymer,Gives prints surface of wood color and texture. The print even smells like wood.SUNLU 1kg Wood filament combines real wood fibers, To satisfy your demands for printing projects of functional parts with wooden texture.
  • ②【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these Wood PLA filaments of 1.75 mm diameter, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • ③【Clog-Free, Bubble-Free & Easy-to-use】SUNLU WOOD PLA 3D Printer Filament is completely mechanically wound, with sturdy fixing holes, 100% tangled free, and manual inspection one by one. Which has an advantage of high purity with low shrinkage. It enables you to have a smooth and stable printing process, with excellent quality prints..
  • ④【Wide Compatibility】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag.
  • Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
Check Stock

KILZ Over Armor Wood & Concrete Resurfacer, Exterior, Textured, Slate Gray, 1 Gallon

  • Over Armor offers an innovative solid color coating that brings old, weathered wood or concrete back to life with an advanced and durable 100% acrylic resin formula..
  • This solid color, textured coating bridges cracks, hides imperfections, and gives a uniform look to old, weathered wood and concrete..
  • Use on weathered or cracked horizontal or vertical wood and composite surfaces such as decks, porches and boat docks, or railings as well as concrete surfaces like pool decks, patios and sidewalks. Two (2) coats are required for optimal durability. Brush, roll, or spray on. Wait 4-6 hours before recoating and 72 hours for full cure..
  • Over Armor is designed to conceal splinters and cracks up to 1/4-inch and creates a textured slip-resistant finish. Not for drivable surfaces such as garage floors or driveways. All surfaces must be clean, sound, dry and free of any dirt, oil, and grease before application..
  • This is a 1-gallon can of KILZ Over Armor Textured Surface Coating in Redwood. Covers approximately 75 square feet per gallon. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings..
Check Stock

LALUZ Farmhouse Chandelier, 5-Light Chandeliers for Dining Room, 32\ Rustic Wood Kitchen Island Lighting

  • [Elegant Handmade Wood Chandelier] This eye-catching orb chandelier with an openwork quatrefoil in a wood finish, presents a classic yet contemporary farmhouse aesthetics. It features a natural solid wood frame centered by three gracefully bronze rusty finish arms contrasting pleasantly with the weathered wood finish, casting a soft glamour for your foyer, dining rooms, bedroom, kitchen, living room and entryway..
  • [Perfect Fits] This elegant luminary is 16” L x 16” W x 17.5” H, making it a gorgeous centerpiece in any of your rooms. The canopy comes in a 5’’ diameter and 1’’ height, designed to fully cover the standard size of the junction box. This hanging light fixture comes with a 59" height adjustable chain, giving you the option of adjusting height between 21.5” to 77.5” from ceiling to bottom (It includes 10ft cords for higher ceiling, please contact us to buy extra chain).
  • [Quick Installation] We simplify all the complex steps to ensure an easy installation process for our you. The whole installation will take no more than 30 minutes. All you need to do is adjusting the height, clipping the two wooden rings together at a 90-degree angle, threading the wire through chain and canopy, wiring (ground: copper wire.
Check Stock

Snapmaker Wood Filament 3D Printer Filament 1.75mm, 750g Spool (1.65 lbs) - Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer Wood PLA

  • Dimensional Accuracy and Consistency: Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee Snapmaker wood filaments to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.03 mm.
  • Clog-Free, Bubble-Free, and Easy to use: Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Snapmaker Wood PLA filament. Vacuum sealed with desiccants in a transparent bag, no bubble, and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking..
  • Wood-like, Perform Better and Less Weight: Snapmaker Wood PLA Filament is PLA-based and uses a special foaming technology, which gives it a stable foam structure to mimic actual wood. It enables you to print whatever you want with wood color and texture, and outperforms traditional wood composite in terms of printing quality.
  • Wood-like density makes the filament lighter than traditional PLA filaments and fits a wide range of applications..
  • Wide Compatibility: Snapmaker Wood filament is ideal for use with practically all FDM 3D Printers, such as Ender, Prusa, Makerbot, Flashforge,....
Check Stock