Reviews Wax Loss Casting

Yoption Injection Wax Jewelry Casting Wax Beads for DIY Jewelry & Craft Making, 1LB, Blue

  • Quality Material: Made of high-quality wax material, very flexibility, tear resistance, durability and reusability. Can be used for a long time and no harm to the body..
  • Engraving Wax: Can be engraved, shaped or even processed to reproduce the most complex design details. Four hardness levels. Lost wax castings in various shapes, such as necklaces, rings, earrings, pendants, bracelets and more..
  • Jewelry Making Wax Beads: Pure natural, rich in oil, easy to remove wax. Widely used in jewelry making, aircraft blades, golf heads, high-accuracy industrial parts, pipe fittings, handicrafts etc..
  • Can be Recycled: Can be recycled for many times. Short curing time and high resistance to low temperature deformation. High strength, good fluidity, small shrinkage, good casting cleanliness..
  • Package: 460g (1LB) in a set. Injection Temperature: 155°F (68°C).
Check Stock

Texas Instruments MultiView TI-34 Scientific Calculator - 4 Line(s) - 16 Character(s) - LCD - Solar, Battery Powered 34MV/TBL/1L1/A

  • PARTALL Paste #2 may also be employed as an inexpensive edge wax on larger molds and may be used to seal rough wood molds or plugs for casting composites, cements, and grouts.
  • Partall Paste #2, the original green wax, is an economical paste wax mold release formulated with hydrocarbon and microcrystalline waxes..
  • PARTALL Paste #2 is a general purpose polishing compound made from a blend of hydrocarbon and microcrystalline waxes that is designed for use with thermoset molding resins at ambient temperature cure when making fiberglass, cast polymer, or composites parts..
  • Great mold release wax for custom parts such as fiberglass, rivertables, and tabletops..
  • Comes in a 1.5lb metal can. Note: Does not come with wax applicator pad..
Check Stock

17Pcs Red Dental Wax Sheets, Base Plate Wax for Dentist, 1.3/2mm Thickness Casting Modeling Wax Sheets Supply for Modelling/Filling Oral Care,Denture Lab Equipment (240g)

  • 1. Base plate wax is used as a wax pattern for making denture bases and bite rims, special designed for dental use..
  • 2. Made of high quality wax material, excellent flexibility and plasticity, easy to shape and carves..
  • 3. With proper hardness and adhesion, easy to operate, especially suitable for clinical trial teeth making..
  • 4. Without bad smell, uniform in color and smoothly in texture, used for oral casting and other wax mold..
  • 5. Special for the clinical trials teeth, denture bases wax, row of teeth and sculpture..
Check Stock

Tyenaza Carving Wax, 5pcs 2mm Jewelry Wax Block DIY Craft Rings Making Casting Mold Waxs for Modeling Engraving Making Accessory

  • Jewelry Casting Wax --- Effectively help you make exquisite jewelry and practical jewelry processing tools. This unique wax can be engraved, shaped and even processed to reproduce the most complex design details.
  • Jewelry Production --- Exquisite carving accessories, including 5 pieces of packaging, can meet your different needs. It is ideal for producing fine castings of various shapes and including rings.
  • Free Carving --- Professional jewelry wax green, smooth surface, suitable for carving, carving and modeling. Can be used to create and model different jewelry patterns, etc.
  • Easy to Use --- Raw wax is hard and easy to process. Large wax tube with flat sides. This wax tube is large in size, medium in density, and durable enough to be reused many times.
  • Multipurpose --- The green wax is hard and is easy to work with large tube with flat side. It effectively helps you create beautiful handmade jewelry. Inside is smooth, which allows you to make smooth rings. Ideal for producing a wide range of shapes & finely detailed castings including rings.
Check Stock

ComposiMold Flex Reusable Mold Making for Chocolate Molds, Soap, Low Melt Wax and Flexible Mold Making 20oz

  • Designed for flexible mold making of soft casting materials like chocolate, soap, low melt wax, and more..
  • ComposiMold-Flex is food contact safe and re-usable so you can make as many unique molds as you want with the same material.
  • Our molding gel is soft, flexible, and long lasting, and melts in the microwave.
Check Stock

LET'S RESIN Epoxy Resin Kit, 2 Gallon Epoxy Resin for Deep Pour,Bubble Free & Crystal Clear Casting Resin,Fast Curing Resin for Table Top, Countertop, River Table, Wood, Jewelry Making,Art,Craft

  • Bubble Free Casting Resin: Our casting resin kit formulation contains anti foaming agents, which are used to prevent air bubbles or destruct the bubbles that have already formed. The bubbles will automatically disappear within an hour, creating finished products as clear as glass. It’s perfect for flower preservation. Compared with other epoxy resin, you don’t need to spend a lot of time remove bubble, saving your time..
  • Crystal Clear Epoxy Resin 2 Gallon Kit: This 2 gallon epoxy resin cures to a crystal clear finish, superior high gloss compared to other epoxy countertop kit and hard as a rock. The UV stabilizer formula is very effective in preventing gloss loss, delamination, cracking, and anti-yellowing. This casting resin can be mixed perfectly with any pigments and give the finished product a long-lasting, ultra-clear appearance without yellowing..
  • Safe and easy to use: Our professiona resin and hardener are made of safe and premium materials. Mixed in a 1:1 volume ratio,is easy to operate and requires no experience, even if you are new to epoxy resin.It usually takes 8-24 hours to solidify in summer and longer in winter. How to Use epoxy....
Check Stock

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

Copper Alloy for Gold Jewelry-Corrosion Resistant Copper Casting Alloy-Rings, Necklaces, Pendants and Any Other Brass Metal Required for Casting(Brass)

  • 【SCIENTIFIC FORMULA】99.99% pure copper and 99.999% zinc are used as raw materials (Free of nickel, lead and cadmium), plus deoxidation process and trace rare earth elements to achieve excellent flow performance..
  • 【HIGH QUALITY】Designed for lost-wax casting, this makes it suitable for casting in open systems, with centrifugal and vacuum casting and in closed systems. Excellent results in almost any casting method..
  • 【PERFECT CHOICE FOR MAKING GOLD JEWELRY】With golden tone that is very popular among jewelers,the copper alloy is extremely durable and can hold up well over time, despite daily wear, featuring high resistance against corrosion..
  • 【GREAT INDUSTRIAL MATERIAL】The combination of physical properties such as strength, conductivity, corrosion resistance, machinability and ductility make the copper suitable for a wide range of applications. it’s very versatile and easy to shape, imprint and engrave all kind of cuffs, pendants and rings and various brass castings..
  • 【PACKAGE】1 pounds brass are sealed in BPA-free plastic packaging to prevent corrosion or oxidation..
Check Stock

Actvty Resin Coaster Molds 6-Cavity Deep Round Coaster Silicone Molds for Resin Casting, Large Coaster Molds for Epoxy Resin DIY Custom Coasters Resin Art Gifts Home Decoration

  • ... Coaster Resin Mold: 6-Cavity round coaster molds, diameter: 3.93 inch, height: 0.9 inch.The interior of each silicone resin molds is smooth and shiny, which makes it easy to de-mold after it’s completely cured and reduces the need to cut back and polish..
  • Mold for Resin Casting: Thick round coaster resin molds Ideal for making coasters, paperweights, wall decor, bowl mats, specimens, home decor, and more. You also can add dry flower, pearl pigment, mica powder, glitter and sequins into the resin molds to get a unique molds..
  • Premium Quality Silicone Mold: Resin coaster molds are made of durable silicone by advanced techniques, With the flexible, smooth and reusable and high transparency, easy to use and clean..
  • DIY Epoxy Molds: You can also share more time with your family and create unique dried flower, leaf, and insect specimens and other resin jewelry projects. It's a ideal gift choice to send to your friends family as Mothers' Day, Fathers' Day, Thanksgiving ,Graduation seasons, Valentine’s day, Halloween or Birthday gifts..
  • Suitable for Many Casting Materials: Silicone co....
Check Stock