Reviews Water Resistant Cable

HEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat

  • ...structions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

Restmo 4 Pack Mini IP44 Waterproof Outdoor Connection Box with Lockable Latches and Mounting Holes, Weatherproof Extension Cord Safety Cover for Outdoor Plugs, Lights, Cables, Wires, Size Small, Black

  • Upgraded Extension Cord Safety Cover: With 4 lockable latches, 2 cable clamps, 2 mounting holes and 2 cable ties, it creates a watertight sealing space, keeps outdoor & indoor electric connection dry and safety, easy to place and hang anywhere..
  • Mini Size Electrical Box: Compact dimension (7 x 2 x 2 inches) and light weight (3 ounces), no more drop when hanging up the housing case in the air. Widely compatible with up to AWG14 cord, flat cable and braided wire..
  • Water & Dust Resistant: IP44 waterproof with rubber seals at both ends, protect against water, snow, rain, dust, dirt, and more. Great to protect outdoor string light, landscape lighting, pool pump, garden power tool, fountain, Christmas and other holiday decorations..
  • Heavy Duty & Weatherproof: Constructed with industrial grade material, highly durable and UV resistant, withstand hard impacts and heavy force, great to use in outdoor harsh environment..
  • Easy to Use: No installation required, easily open with top lid and 4 latches, place the connection inside, fasten the cord with cable clamps, lock and seal..
Check Stock

DEWENWILS Roof Heat Cable, 18ft Heat Tape for Pipe, Gutter, Roof, Self-Regulating Cable Pre-Assembled, UL Listed

  • Designed for water filled plastic (including PEX) and metal supply pipes only. Do not use on drain lines, fuel lines, hoses, empty water pipes, steam lines or gutters. Three year limited warranty. If you have any question about the product, please contact us and we will try our best to help you..
  • Quick and easy to install. Minimum pipe length is 3 feet. Cable will be applied straight along the pipe, and will protect pipe from 3/8" to 1 1/2" in diameter..
  • Save energy. 120 Volt, 7 watts/ft. 2 ft 18/3 cold lead with plug.The build-in thermostat automatically turns the heating cable on below 42.8° F (6° C) and off above 55.4° F (13 ° C)..
  • UL approved. Durable polyurethane as inner insulation and weather resistant PVC (high-low temperature) for outer protective jacket. Never allow heating cable to touch, acorss , spiral or overlap itself at any point..
  • Testing the cable before installation. Uncoil the cable, plug in the cable. Wrap a bag of ice around the thermostat. The thermostat will turn the cable on when the temperature below 42.8° F. Wait about 20 minutes. The cable should now feel warm to touch. Then turn it off..
Check Stock

HEATIT HISD 12-feet Pipe Heating with Built-in Thermostat, Black

  • ... volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black

  • ... volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

Pyle Car Audio Wiring Kit - 20ft 8 Gauge Power Wire 1000 Watt Amplifier Hookup for Battery Head Unit & Stereo Speaker Installation Sound System - Marine Grade Cable Wired & Gold Plated Fuse PLMRAKT8

  • CABLE AND WIRE KIT: It has 20ft. 8 gauge red power wire, 4ft. 8 gauge black ground wire, 20ft. 18 gauge blue remote turn on, 20ft. 12 gauge stereo speaker wire, 20ft. right angle/standard stereo RCA audio cable and 6ft. black split loom cable conduit..
  • DIFFERENT TERMINAL: Pyle car audio wiring kit has 2 ring terminals 8G 2 spade terminals: 8G, 5 spade terminals: 14-16G, 3 butt connector, 20 cable ties and 1 black grommet. It is high resistance in moisture and has all you need to complete the job..
  • WATER RESISTANT IN-LINE FUSE HOLDER: The cable and wire are marine grade that can be trusted leaving no spark and bad ground wiring. Also, packed up with AGU type 60A gold plated fuse. This is perfect installation in car, boat and outdoor amplifier..
  • POWER RATING: With a power rating of 1000 watt, this kit is an ideal for high power protection and sure to complete your amplified vehicle powered sound system. It gets current from your battery to your amplifier that increases audio purity..
  • Marine Grade Cables and Wires - 20ft. 18 Gauge Blue Remote Turn-On - Water Resistant In-line Fuse Holder - 1 Black Grommet.
Check Stock

EZ-FLO 60286 42 in Eastman Flexible Magnesium Anode Rod 3 in Nipple Fitting Chrome

  • ✅ADVANTAGES OF MAGNESIUM: Made from magnesium to provide a healthy solution to your needs and more effective at keeping the water tank from....
  • ✅CORROSION PROTECTION- Magnesium Anode Rod is built with flexible carbon steel cable and durable corrosion-resistant stainless steel nipple The....
  • ✅SAVE MONEY- Eastman Flexible Magnesium Anode Rod helps prolong the life of your water heater tank by attracting corrosion to itself. No water tank....
  • ✅QUALITY- Built with a carbon steel cable and 4 sections of magnesium links. It features a durable stainless steel 3/4 inch x 3 inch NPT nipple....
  • ✅INSTALLATION- Fits almost all water heater. Easy installation at the top of the water heater tank with 12 in. minimum clearance required. The anode....
Check Stock

Heat it HIRD 20 feet Roof Gutter De-Icing Cable

  • ...mately few minutes, it should feel slightly warm to the touch. Then unplug the cable..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug.
  • 5 watts/ft. Pre-assembled, ready to install, no maintenance required.
  • Easy instruction manual, clips and spacers are included..
  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time..
Check Stock

Iron Forge Weatherproof Water Resistant Extension Cord Connection Box, Outdoor Plug Cover for Electrical Connections, Power Tools, Power Strips Landscape and Holiday Lightings - Black

  • PROTECTS YOUR ELECTRICAL DEVICES - With rubber seals at every wire slot, this weatherproof and water-resistant box conforms well to the power cord.
  • inside cable retention clamps hold the extension cords tightly in place to prevent the plugs from sliding or disconnecting even if tug the cords in uses. Ideal for landscape lighting, water features, Christmas decorations, power tools and more, this outdoor connection cover keeps your outside outlets safe and dry.
  • RESISTANT AGAINST WATER, DUST & DIRT - With IP54 rated, our product provides watertight sealed space to protect outdoor & indoor plug connections from the elements like water, snow, rain, dust, dirt, and other outdoor irritants to ensure circuit safety ( Note: We do not recommend to submerse the box in water for a long period of time)..
  • FITS 12/14/16 GAUGE EXTENSION CORD UP TO 6 OUTLETS. Ample housing can accommodate a power strip with up to 6 outlets.
  • fits up to 12 gauge extension cord and flat cable(not included).
  • 5 cord holes feed multiple cords connections.
  • 2 unopened optional drain holes are available to fit larger gauge cords or drain the water.
  • EASY TO USE, PORTABLE AND NO INSTALLATION REQUIRED It is mountable by 4 direct mounting holes and 2 keyhole mounting slots.
Check Stock