Reviews Water Pressure Regulators

25 psi Water Pressure Reducer Regulator for Drip Irrigation System, 3/4 inch Hose Thread, 150 psi Max Inlet Pressure, Lead-free Brass

Maintains water pressure between 20-30 psi (25 psi nominal). 0-6.5 GPM (gallons per minute) flowrate. Maximum Inlet Pressure: 150 psi. Note: As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut..
Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib or garden hose in USA and Canada..
It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead..
Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight..
Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time..

OTC's Fuel Pressure Test Kit quickly and easily locates any malfunctioning fuel system component - fuel filters, pressure regulators, fuel lines, and fuel pumps - without removing it from the vehicle.
Large, easy to read gauge features an impact resistant rubber encased housing.
High quality solid brass fittings, hose, and tubing for long lasting performance and reliability.
Convenient pressure relief valve allows for safe, clean testing.

...ons same day of event. Latex balloons have an average indoor float time of 12-24 hours. Foil balloons can last multiple days if filled and stored properly. Balloons used outdoors will have a much less float time due to the elements. Foil balloons require a low pressure regulated foil inflator to inflate them. These regulators have an auto shut off pressure valve and will not over inflate them..
Balloons can usually be properly filled at your local party supply store, florist and even some larger grocery chains will offer helium. For larger balloons like these 72" and our 60", it may be more cost effective to rent a helium tank from a party rental company or local welding supplier..
WARNING CHOKING HAZARD: Children under 8 years old can choke or suffocate on broken balloons or balloons that are not inflated. ADULT SUPERVISION REQUIRED. Discard broken balloons immediately..
Keep the plastic bag containing these product away from small children. The thin film may cling to nose and mouth and prevent breathing. Dispose of bags immediately once product is removed!.

FRL Air Filter Regulators: Removes water/particles, protects air tools, and prevents overdrying tools..
Piggyback: Compact Filter/Regulator duo that combines the functions of both parts. Most effective when space is limited- Save space on your wall..
Cast aluminum body. Locking adjustable pressure knob. 40-micron bronze sintered filter element. Dial Pressure gauge. Automatic/Manual full-time fluid drain..
1/4" inch national pipe threads on both inlet/outlet. Polycarbonate Bowl: Full, transparent view of fluid level. Bowl Capacity: 1.4 OZ..
Max Air Flow: 20 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..

Working Pressure of this YaeBrew Beer Regulator: 0-60 PSI.
Tank Pressure of this Keg CO2 Regulator 0-3000 PSI.
All YaeBrew regulators are pressure tested before shipment to ensure good performance. there is a Safety Pressure Relief Valve with high fatigue strength and durable inside springs..
Application: This Regulator can be used in Shops,Home, Bars, Outdoor, Plants, factories etc..

FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
3/8" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/4" center mount..
Max Air Flow: 212 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..

FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
1" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/4" center mount..
Max Air Flow: 280 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..

MUST HAVE for all cornelius keg owners. Allows for injecting CO2 in and dispensing beer out of standard ball lock kegs..
5FT OF GAS TUBING allows for your CO2 tank to be placed in a convenient position. Competitor products make you compromise with only 3ft..
EASY CLEANING by removing the MFL disconnect and running water through the tubing. Most competitor products use barb disconnects with pex clamps which is extremely difficult to clean..
WORKS WITH ALL STANDARD REGULATORS. Includes swivel nut for mfl regulators. Remove swivel nut for barb regulators..
Upgrade your current regulator to our ultimate regulator that works with 5 types of CO2 tanks.
including paintball, sodastream, CO2 cartridges, and standard welding tanks. Search B071ZNP5BS to learn more..

FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
1/4" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/4" center mount..
Max Air Flow: 212 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..