Reviews Water Pipeline Fittings

Automotive Smoke Machine Leak Detector, EVAP Vacuum Leakage Diagnostic Tester with Pressure Gauge & Flow Meter for All 12V Cars

  • ... 【ADJUSTABLE AIR FLOW METER & PRESSURE GAUGE】You can easily control the air pressure, because if the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected.
  • You can observe the barometer to determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car’s pipeline. On the contrary, your car’s pipeline leaks need to be repaired..
  • 【WIDE COMPATIBILITY】Fuel pipe leakage locator is used to detect leakage of pipe systems on automobiles, motorcycles, snowmobiles, ATVs, light trucks, and speedboats. It is suitable for all makes and models of cars..
Check Stock

LeiJunDuoRong Drain Strainers/Plastic Grate/Resin Plastic Strainers Strainers/Sewer Cover Grates/Drain Sewer Cover/Plate Grid Rainwater Grate Rectangular Well Cover/Drain Garage black 19.7x11.8x0.8in

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
  • Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 12 GPM flow rate. 3.9 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 4 in. Round Drain Grates are available in a variety of colors.
Check Stock

Glarks 220Pcs Brass Compression Sleeves Ferrules Tube OD 4mm 6mm 8mm 10mm 12mm 13mm 14mm 16mm Brass Compression Fitting Assortment Kit

  • ♛【What You Get】: This kit include 220pcs 8 size ferrules which are suitable for 4mm, 6mm, 8mm, 10mm, 12mm 13mm 14mm 16mm outer diameter of the pipe. Wide range and enough quantity can meet your various needs..
  • ♛【High Quality Material】: All our ferrules are made of high quality brass, anti-corrosion and anti-rust, they can work for a long time even in humid environment. At the same time, it also has enough strength to withstand the pressure of the pipeline..
  • ♛【Product Feature】: These ferrule sleeves are light, portable and durable in use. After the installation is complete, it is tightly closed, which can offer a good sealing effect..
  • ♛【Excellent Craftsmanship】: We pay attention to every detail our goods. These fittings have perfect radians and are not easy to slip during installation.
  • surface is smooth and free of burrs, which will not harm your pipeline..
  • ♛【Wide Application】: These sleeves are part of tube compression fitting, can be used with copper, brass, aluminum, 304 stainless steel tube, plastic tubing and other hard pipe or hose. They are easy to install and no tool required..
Check Stock

Jienk 5Pcs Bulkhead Union 3/8\ x 3/8\ Tube OD Push to Connect Tube Fitting, PMM-3/8 Pneumatic Quick Connect Air Fitting

  • 【Bulkhead Design】Pneumatic Fittings is mainly used for air piping, pneumatic tools, do not need joint tools can realize the pipeline connecting or disconnecting the link. Excellent choice for through wall application..
  • 【Durable】The body made of strong thermoplastic (PBT) housings and the ferrule adopts zinc alloy. Operating pressure 0~145 Psi, high pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove. Just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation. After installation, the tube direction can be changed easily. Help a lot with the alignment when piping the air line..
  • 【Application】Working temperature range: 32～140°F. Most commonly used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, General Industrial, Maintenance and Automotive Assembly, Aircraft Controls, Printing, Packaging and Textile. As well as moving parts such as air ride, air horns and air suspension system..
Check Stock

IBC Tote Fittings with Valve Tote Adapter 2.95' Coarse Thread Tote Ball Valve Heavy Duty Tote Tank Drain Ball Valve Connector for Water Liquid Container NPT DN50

  • ...li, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
  • Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water, etc.
Check Stock

PRO BAT Braided Hydraulic Brake Hose Line Pipeline For Chinese GY6 Scooter ATV Dirt Bike Go Kart 10mm Banjo Ends (70''/175cm)

  • 70"/175mm Hydraulic Brake Oil Line ATV Quad Go Kart Scooter Cable Hose With 10mm Banjo Ends.
  • 70" long --from top to end ,10mm banjo nut fittings.
  • Made with high quality heavy duty braided stainless steel.
  • Hydraulic Brake Master Cylinder Hose Line Pipeline.
Check Stock

IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot

  • ...li, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
  • Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water, etc.
Check Stock

NDS 640 Square Grate with Low-Profile Adapter Fits 3 in. & 4 in. Drain Pipes & Fittings, 6 in, Black Plastic

  • Protect your drainage system by using a grate and low-profile adapter on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining moderate water flows from lawns, landscaped areas, patios, walkways, and under downspouts.
  • Fits 3 in. & 4 in. Sewer and Drain Pipes & Fittings, 3 in. & 4 in. Single-Wall Corrugated Pipes, 3 in. & 4 in. Triple-Wall Pipes. 44 GPM flow rate. 14.4 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place low-profile adapter on top of drain pipe or drain fitting, for a soil-tight fit.
  • place 6 in. drain grate on top of low-profile adapter. 6 in. Square Drain Grates (with Low-Profile Adapters) are available in a variety of colors and materials.
  • Grate top is 5-7/8 in. square with ¼ in. grate openings.
  • Low-profile adapter is 2-1/2 in. high, top opening is 6-3/16 in. square.
  • Comes with one 6 in. Square Grate and Low-Profile Adapter. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
  • NDS grates are a proven alternative to traditional concrete d....
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock