Reviews Water Ph Probe

Digital pH/TDS Meter with ATC pH Tester, 0.01 Resolution High Accuracy 3 in 1 Pen Type Tester, Water Tester for Water, Wine, Spas and Aquariums

  • 【3-in-1 pH Meter】pH meter has a three-in-one function, which can measure PH, TDS and temperature with high precision at the same time. All-round measurement of water quality to ensure healthy water quality..
  • 【Automatic Calibration pH Tester】With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. And pH meter uses a 3-point calibration method to calibrate the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18. You can calibrate effortlessly to ensure the accuracy of your measurements..
  • 【High Accuracy Water Tester】High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response. Green Backlit LCD Design guarantees that you can read the measuring results in any condition. One-button lock reading function helps lock reading even if the tds Meter is taken out of the sample!.
  • 【Pocket Size Water pH Tester】 You can use this small Pocket Size but powerful pH meter device to measure your aquarium, pool, pond in a garden, bath tub to test the levels of pH value. The digital ph meter can also be used to measure drinking water, R....
Check Stock

Fosmon Soil pH Tester (2 Pack) - 3-in-1 Measure Soil pH Level, Moisture Content, Light Amount Soil Test Kit for Indoor Outdoor Plants, Flowers, Vegetable Gardens and Lawns

  • [MOISTURE, PH, SUNLIGHT IN ONE] Test soil moisture, pH value and sunlight by one single meter. Quickly helps you to know when you need to water your plants. Control the pH value in the soil and know whether the plants are getting adequate sunlight..
  • [FASTER & MORE ACCURATE READING] The premium double-needle design supports the accurate and reliable measurement of soil moisture and pH acidity..
  • [EASY TO USE] No batteries needed. Easily switch back and forth between moisture, pH, and sunlight position. Insert the sensor probes into the soil about 2-4 inches, adjust position of probe until pointer swings, and read the value. Clean the probe after each use..
  • [WIDE MEASUREMENT RANGE] Moisture Range: 1-10 (1-3 Dry , 4-7 Normal, 8-10 Wet), Relative Light: 0-2000lux (0-200 Low, 200-500 Low+, 500-1000 Normal, 1000-2000 High), pH Range: 3.5-8ph (3.5-6.5 Acid, 7-8 Alkaline).
  • [INDOOR & OUTDOOR USE] Design to be light and portable and easy to carry around for outdoor use. Ideal soil test meter for home, garden, lawn and farm, both soil-less mixtures and soil grown plants..
Check Stock

RCYAGO 4 in 1 PH/ORP/H2/TEMP Meter Digital Water Quality Tester and Hydrogen Generator Water Bottle

  • Hydrogen Water Tester: 4-in-1 water quality test is a newly developed high-precision multifunctional water quality tester, which has the function of....
  • High Efficiency: Rich hydrogen cup It only takes 3 minutes to quickly electrolyze, change the water quality, and accompany you often. In the....
  • ±0.05 pH Accuracy and 3-Point Calibration: With high sensitivity glass probe, RCYAGO PH meter’s full measurement range of 0-14pH, 0.01 pH....
  • Safe and convenient: Hydrogen-rich water cup USB charging port adopts DC round charging interface, hidden waterproof design, equipped with a charger....
  • Rich hydrogen cup brings you a healthy life: anti-stress, anti-fatigue, enhance immunity, improve memory, beauty, improve sleep, improve water....
Check Stock

GAOHOU PH0-14 Value Detect Sensor Module + PH Electrode Probe BNC For Arduino

  • Getting the voltage varies on what you’re using. The PH for this sensor is not at 0v for a PH7 it’s around 2.51v from the multi-meter and PH4 at 3.03. If you calculate the step, 2.51-3.03 =-0.52. The difference between ph4.01 and PH7 is 2.99..
  • If you’re using a Particle product like the Photon or Argon, be aware of a bug. It’s a hardware issue with the analog ports fluctuating a ghost voltage. This fluctuation is enough at these low voltages reading to make your ph sway by .7 or more. To fix this, you’ll need to add a 0.1uF cap between the analog port your using and ground..
  • This PH electrode probe must be calibrated with standard buffer solution before each use, and the electrode probe cannot be tested continuously for a long time, which will shorten its life. There are two trimmers on the circuit board. One of them is for offset adjustment (closest to BNC connector) accomplished by removing the Ph probe and shorting the BNC connector with a wire. The other trimmer is an upper limit threshold for the digital output pin..
Check Stock

Digital pH Meter with ATC pH Tester, 3 in 1 pH TDS Temp 0.01 Resolution High Accuracy Pen Type Tester, Water Tester for Water, Wine, Spas and Aquariums

  • 【3-in-1 pH Meter】pH meter has a three-in-one function, which can measure PH, TDS and temperature with high precision at the same time. All-round measurement of water quality to ensure healthy water quality..
  • 【Automatic Calibration pH Tester】With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. And pH meter uses a 3-point calibration method to calibrate the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18. You can calibrate effortlessly to ensure the accuracy of your measurements..
  • 【High Accuracy Water Tester】High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response. Green Backlit LCD Design guarantees that you can read the measuring results in any condition. One-button lock reading function helps lock reading even if the pH Meter is taken out of the sample!.
  • 【Automatic Temperature Compensation Digital pH Meter】No longer need to pay attention to the temperature of testing liquid, pH meter can accurately determine the pH value of the sample in the temperature range of 32°F-140°F(0°C-60°C), so as to solve the inaccurate problem caused by changing the liquid temperature..
  • 【Pocket Size Water pH Tester】 You can use this small Pocket S....
Check Stock

Digital pH Meter, Dr.meter 0.01 Resolution High Accuracy PH Tester, Auto Temperature Compensation pH Testing Pen with Backlit Two-Color LCD Display and Data Hold, 0-14pH Measurement Range Water Tester

  • BEFORE USE: Put the included potassium chloride powder into 20ml of pure water and mix well. Then put the probe into the solution for 24 hours, take it out and clean the residual solution on the surface of the sensitive bulb. Now, you can start to calibrate. (Note: If the sponge is wet enough, please skip this step.).
  • DURING USE: If there is inaccurate calibration, repeat the step of 'Before Use'. If using your own potassium chloride powder, prepare the solution by adding 61.5g of KCL into 250ml of water. Then, put the probe into the solution for 24 hours, take it out and clean the residual solution on the surface of the sensitive bulb. Now, you can start to calibrate..
  • AFTER USE: To ensure the activity of the sensitive bulb, add a drop of newly prepared potassium chloride solution into the sponge inside the probe cover. Also, to better maintain the activity of the sensitive bulb, add the solution to the sponge every two months..
  • ▶ 【Notification】Calibrate once per week if you often test solution of PH 10, or once per half month for neutral solutions. The 250ml calibration solution for multiple uses (10ml or so each time). Then rinse the electrode with pure water before next test. Rinse and rest 3-5 min before conversing from strong acid to st....
Check Stock

Oakton pH 700 Benchtop Meter with Probes and Stand

  • 3-in-1 water quality tester: This PH meter has a three-in-one function, which can measure PH, TDS and temperature with high precision at the same time. All-round measurement of water quality to ensure healthy water quality..
  • Easy to use: After calibration, put the sensor in the solution to be tested, and get the reading immediately. Please rinse the probe with water carefully before performing another liquid, otherwise you may get inaccuracy reading..
  • Backlit design: There is no need to worry about seeing the displayed value if the light is insufficient. ORAPXI PH meter features a green backlit LCD to help you obtain the measurement results clearly in any situation..
  • Automatic Temperature Compensation: Auto temp compensation (ATC) ensures accuracy in various temperatures (32°F~140°F), It can solve the possible error perfectly caused by the change of liquid temperature, so as to make the pH readings more accurate..
  • Wide applications: The instrument is ideal for drinking water, daily household, hydroponics, beer brewing, swimming pool, laboratory, food processing etc..
Check Stock

Digital PH Meter Tester Kit, High Accuracy Pocket Size PH Meter for Water, Digital ph Test Pen with 0-14 PH Measurement Range for Household Drinking Water, Aquarium, Swimming Pools

  • 【Family Essentials】Every Family need ph tester for water, Healthy drinking water range from pH 6.5 - ph 8.5, Don't need calibrate in the first time, Pls use the water ph meter directly, our PH meter comes factory calibrated, but In case of long period of inactivity or after a frequent use, Pls recalibration your ph water tester digital before use. you can calibrate the tester with one touch button using Buffer Powder, The included detailed manual will show you how to get the best accurate and st.
  • 【Fast Results, Convenient Size】It only takes a few seconds for your result to appear on screen. Simply press "ON", stir gently and the reading will stabilize on the display in moments. This portable size instrument allows you to carry it around easily in your pocket and do your measuring anywhere. Its special plastic case will protect it whether you take it to the pool, on a trip, to the beach or camping..
  • 【High Accuracy】Water ph meter Has a Sensitive Electrode Sensor to Read Accurate Ph Levels. The Included Detailed Manual Will Show You How to Get the Best Accurate and Stable Reading, Ensure Your Pool, or Even Drinking Water Has a Perfect Ph Balance..
  • 【Wide Use】PH reader for water with High quality glass PH probe, The digital ph meter kit ....
Check Stock

Digital PH Tester for Water- PH Meter High Accuracy Water Quality Tester with ATC, 0.01pH Resolution 3 in 1 PH TDS Temp for Household Drinking Water, Hydroponics, Lab, Aquarium by ORAPXI

  • ✅High Accuracy&One-Button Lock Reading Function - With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response.One-button lock reading function helps lock reading even if the tester is taken out of the sample!.
  • ✅Automatic Calibration - The digital ph meter for water uses a 3-point AUTOMATIC calibration method, calibrating the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18 to ensure the accuracy of your measurements..
  • ✅Automatic Temperature Compensation - No longer need to pay attention to the temperature of testing liquid, Allprettyall ph tester digital can accurately determine the pH value of the sample in the temperature range of 0 °C-60 °C (32 °F-140 °F), so as to solve the inaccurate problem caused by changing the liquid temperature..
  • ✅Wide Application-Allprettyall water quality tester designed in pH and temperature can be measured simultaneously with high precision. Omni-directional measurement of water quality to ensure the health of water quality! The ph meter digital water tester is ideal for drinking water,daily household,hydroponics,sewage, lab teaching and ANY water sample..
Check Stock