Reviews Wall Anchor Bolts

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..

[STORAGE AFTER FITNESS]:Store the barbell bar vertically on the wall storage rack to save your gym space and avoid placing it on the ground to hinder your way or the work of other fitness equipment..
[EASY TO INSTALL]:The barbell rack comes with 2 anchor bolts. Fix the 2 screws into the bolts and the bracket can be firmly installed on the wall..
[THICK STEEL PLATE]:The barbell frame is made of high-quality thick steel plate, black powder coating, strong load-bearing capacity, strong and stable..
[SUITABLE SIZE]:The barbell rack size is 6.5" (H) x 6.5" (W) x 4" (D)，Can accommodate Olympic barbells or any standard bar size, including fitness accessories..
[PROMISE]:Reach out to our AMAZON customer service team if you have any questions or concerns..

Standard size M8 expansion bolt, 70mm total length, with flat washer and hex nut..
High quality 304 stainless steel. Sturdy and firm, resistant to rust and corrosion. Concrete anchor and masonry anchor , easy to be mounted..
Widely used in fence,burglarproof doors and window,canopy,air conditioning rach fixation,home decoration,engineering,etc..
If the wall is built by relatively soft brick , it may need to make the hole which is 1mm smaller than the suggested..
Air brick, foam concrete block,are not suitable for these expansion bolts..

Bring the outdoors in: When you have the hammock itch, but the weather is crummy, create your own relaxation station inside with the Deluxe Hammock Hanging Kit.
Master the art of lounging: Simply install the 2 anchor bolt hangers with the lag screws and washers to the wall studs.
Clip your hammock (not included) to the hangers and let the relaxing begin.
Trustworthy material: Falling is not an option, unless it's to sleep.
The Indoor Hanging Kit features sturdy 6061 anodized aluminum hardware and is designed to support up to 250 pounds.
The full hanging experience: Every kit includes 2 anchor bolt hangers, 2 lag screws, 2 washers, 4 bolts and a detailed installation guide.
ENO gives back: ENO loves the outdoors and shows it by donating to organizations that preserve our wild places.

Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..

✔️ MAXIMUM PROTECTION OF GOODS DURING TRANSPORT: Tie down anchors are used mainly to secure on vehicles such as trucks, trailers, SUV, vans, campers, boats, etc. It helps protect cargo from falling or breaking on impact, reducing noise and vibration. The D rings make your work easier and more convenient..
✔️ BREAKING STRENGTH UP TO 3500 LBS: Wide surface tie-down anchor design with 4-holes for better bearing capacity and no wobble like 2 mounting holes, ensuring safe operation at 3000 lbs, max break strength up to 3500 lbs. There are different types of bolts and screws for mounting on any surface. (Our tie down anchors design has been successfully registered for an exclusive patent in the United States).
✔️ HIGH-QUALITY MATERIAL & ADVANCED MANUFACTURING TECHNOLOGY: The tie down anchor is made from premium steel with high carbon content, increases hardness and better bearing capacity. The product is protected by a layer of electrophoresis black to ensure anti-rust and corrosion-resistance, ensuring durability and reliability..
✔️ EASILY INSTALLATION & WIDELY APPLICATION: Threading a screw or bolt through the mounting hole on the surfaces of wood, iron, concrete, etc, and then securing it on the surface. The product is used for var....

【Marine Grade】Antsky wedge anchor bolts are made from high quality 316 STAINLESS STEEL, it's rust resistance, can last long in wet and humid environments；.
【Diameter】The OD of the anchor is 3/8'', the total length is 3-1/2" , the length of the threads on the anchor is 2"；.
【Black Painting】Our anchor's surface is electric painted into black colour, which is special made for longer working life and stylish looking；.
【Application】This anchor is designed to use in concrete、rocks etc. base material；.
【Note】The anchor requires a pre-drilled hole in the base material, which must be same size as the OD of the anchor, we suggest to use a 3/8'' drill bit..

The Color Guard Flag Pole Package includes everything you need to custom balance your flag pole for the perfect spin.
Package includes one 5.5' aluminum flag pole, 1 (pair) of brass weight anchors, 4 individual weight anchor bolts, and 1 (pair) of rubber end caps.
The patent pending design of the flag pole weight anchor system allows you to quickly and easily change the balance and spin of your flag pole.
Flag pole is constructed from 1” diameter light weight, high strength aluminum with scratch resistant, high gloss hard anodized finish.
Each package includes one of each of the following weight anchor bolts: 1.5" (1.4oz), 2," (1.7oz), 3" (2.2oz), 4" (2.8oz).