Reviews Vxl3s Motor And Esc

Castle Creations Mamba XLX2 1/5 8S 33.6V ESC with 20A BEC and 2028-1100Kv Sensored Motor

  • ...fer to the Mamba XLX2 Product Use Statements (in document section) for information regarding calibration, input voltage, minimum battery requirements, wiring, soldering, connectors and more..
  • Application: The Mamba XLX2 and 2028-1100kv combo is designed for the most extreme and demanding RC applications. The massive motor and high power ESC are capable of pushing vehicles and drivers to their limits and beyond. This is the perfect combo for vehicles weighing up to 30 lbs and up to 8s LiPo. Vehicle Examples: Arrma Kraton 8s, Arrma Outcast 8s, Traxxas X-Maxx. Note: Some vehicles may require aftermarket parts to allow ESC and/or motor fitment..
  • The Mamba XLX2 is packed with a potent combination of hardware and software advancements, sensored performance, CRYO-DRIVE, onboard data logging (to monitor current, voltage temperatures, RPM and more ), a powerful integrated 20A Peak Adjustable BEC, auxiliary wire functionality (on-the-fly adjustments to ESC through your transmitter) and waterproof design that will set a new standard for high performance power systems..
  • You can easily optimize the ESC for any driving condition, from rugged terrain to smooth pavement to the perils of rock and gravel. Create, save and download setup profiles through the Castle Link P....
Check Stock

Monster X 25.2V ESC,8A Peak BEC W/1515-2200KV SENSORED Motor

  • ...e control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver..
  • Mamba Monster X can capture and record performance data from your last couple of runs, commonly referred to as data logging. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life..
  • The Mamba Monster X is telemetry ready when using the S.BUS2 Telemetry Link (sold separately) for use with specific Futaba S.BUS2 radios and compatible Castle Creations ESCs. Telemetry data can be displayed on the transmitter screen, or notify you when a defined threshold is exceeded, (battery voltage, ESC temperature, etc.) you can configure a vibration or sound alert from the radio..
Check Stock

JMT Mini Multi-Rotor 1806 2400KV CW CCW Brushless Motor for DIY 2-3S 250 Mini Drone FPV CC3D 260 330 RC Quadcopter (2CW+2CCW+4ESC)

  • Clockwise Motor CW or CCW in Silver Motor Cap.
  • 12A ESC built in SIL F330 chip,supports 2-3S Lipo and BLHELI 14.2 Firmware..
  • 2400 KV Brushless Motor Support 6.5A (max.) Working current, supports 70W(max.) Power..
  • Used for DIY 2-3S 250 Mini Drone FPV CC3D 260 330 RC Drone.
  • 【What You Can Get】- 4x BLheli 12A Brushless ESC, 2x 1806 Brushless Motor (Silver Orthodontic CCW), 2x 1806 Brushless Motor (Black Orthodontic CW).
Check Stock

Powerhobby Motor Cooling Fan/HeatSink Dual Twin Fan + Velineon VXL-3s ESC Cooling Fan Combo Blue Compatible with Traxxas Slash 4×4

  • Includes : 1 Motor and 1 ESC Cooling Fan.
Check Stock

SpeedyBee Mini F7 Flight Controller 3-6S 20x20mm Built-in Bluetooth Drone Stack Support Wireless Tuning for 2-4 Inch FPV Drone

  • The SpeedyBee Advantage: Download SpeedyBee App on your mobile devices, free to change the settings of flight controller and ESC anywhere without a computer..
  • Wireless FC ESC Tuning: Connect the SpeedyBee app via Bluetooth, configure the UART Ports,PID,OSD and every other settings on this flight controller and BLHeli_S ESC in this stack wirelessly..
  • Support Digital And Analog Fpv System: The flight controller supports various analog image transmissions above 5V and also compatible with DJI Air Unit and Caddx Vista..
  • Change Motor Directions Wirelessly- It’s convenient to change the motor directions just in a few simple steps on SpeedyBee app..
  • What You Get: SpeedyBeeF7MiniFlightController, Manual Card.
Check Stock

Treehobby RC Car 60A Brushed ESC Electric Speed Controller 6V/2A BEC Compatible with traxxas TRX-4 TRX-6 D90 HSP Tamiya Axial SCX10 1/10 RC Truck, Buggy, Short Course Truck,Rock Crawler and Tank

  • Compatible with 1/10 RC Truck, Buggy, Short Course Truck,Rock Crawler and Tank..
  • Supported motor:2S Lipo /6cells NiMH: 540 /550 motor(≥12T or RPM less than 30000 @7.2V).
  • 3S Lipo /9cells NiMH: 540 /550motor (≥18T or RPM less than 20000 @7.2V)..
  • The ESC has protections of Lipo battery low voltage, cell quantity autotest, high-temperature protection, throttle signal loss protection..
  • The high-quality components of this ESC allows it splash-proof and dustproof, which is durable.The ESC possesses an aluminum cooling system offering excellent,heat dissipation a strong resistant current capability..
  • Built with the superior components features enhanced throttle response, excellent acceleration, strong breaks, and throttle linearity, it is a good choice for RC hobbyists, especially for DIY enthusiasts..
Check Stock

Traxxas 58014-4 Slash 2WD Unassembled Kit 1/10-scale 2WD Short Course Truck

  • Traxxas 58014-4 - Slash XL-5 1/10 2WD Short Course Truck Unassembled Kit.
  • Features: Unassembled kit with electronics Includes XL-5 ESC, Titan 12-turn motor, servo, and TQ 2.4GHz radio system Clear, fully-trimmed Slash body....
  • Includes: (1) Slash 2WD Assembly Kit: 1/10-Scale 2WD Short Course Truck (1) Clear body (1) Transmitter (1) Receiver (1) Servo (1) ESC (1) Motor (1)....
  • Part number(s) included (in factory packaging): 58014-4.
Check Stock

5010 EEE V2.0 370 KV MAD COMPONENTS brushless Motor for The multirotor Quadcopter¡­

  • Maximum hollow design,ultralight weight,fast heat dissipation. Unique stator design, 24N28P configuration.
  • Standardized mounting hole position,compatibility with all kinds of rack. Through the simulation of magnetic flux density and magnetic envelope, the motor has low energy consumption and high efficiency.
  • Durable EZO imported bearing, more stable rotation, more resistant Using high performance arc magnet, the performance is improved by 5%.
  • MAD 5010 EEE brushless motor is the single rotor load of 800-2000g, with 14-24 “carbon propeller. Support Li-ion 6S-12S. The largest thrust of single rotor is up to 5000g.the weight of motor is 158g..
  • Maximum Power 515W Maximum Thrust 3403g Maximum Torque 1.03N*m Recommend ESC AMPX 40A PRO ESC Recommend Propeller FLUXER 15′-20′ Propeller Recommendation 900g-1500g(15′-20′).
Check Stock

Motor Cooling Fan 30mm RC Model Heatsink 28000RPM ESC Cooling Fan for RC Car 1/8 1/10 1/12 Scale 540 550 Brushless Motor (Black+Red)

  • ▶【RC Car 540 550 Motor Cooling Fan】 Designed for RC model car 1/8scale, 1/10scale, 1/12 scale 540 550 brushless motor and esc..
  • ▶【Prevent Motor From Overheating】 The speed can reach up to 28000 RPM, excellent heat dissipation effect to protect the motor..
  • ▶【Exquisite Workmanship】 Made of high quality material, exquisite workmanship make this cooling fan is durable for long term use..
  • ▶【Unique Appearance Design】 Heatsink is black body with cool red patterns and lines, simple and cool..
  • ▶【Easy to Install】 Esc cooling fan compatible with all brackets with 24mm mounting holes. Notice: The plug is not divided into positive and negative poles, and you don' worry the wrong connection will not work..
Check Stock