Reviews Voltage Output

Victron Energy DC-DC Bluetooth Charger Orion-Tr ORI 122436120 Smart 12/12-30A (360W) Isolated B2B Booster

Input voltage range: 10-17V --- Output voltage adjust range: 10-15V --- Cont. output current at nominal output voltage and 40°C: 30A --- Maximum output current (10 s) at nominal output voltage minus 20%: 40A.

①Multiple Protections: Overvoltage (0-31V), Overcurrent (0-10.1A), Overheat protection function (85 ° C), intelligent fan cooling. You can set overvoltage protection and overheat protection..
②Multi-Function Display: 2.8-inch color LCD display, display voltage (output voltage set value and actual output value), current (output current set value and actual output value), actual output power, cumulative execution time, channel Output status, The DISPLAY key allows you to choose to display the measurement data numerically or as a curve. Rated output voltage: 0-30V, rated output current: 0-10A. Setting / readback resolution: Voltage: 10mV.
③Programmable Power Supply: Memory key. You can save 4 sets of channel parameters (M1 to M4) and output them quickly. List waveform output settings: You can edit and get output waveforms. The waveform set contains 10 editable points. The editable parameters for each point include output voltage, output current, waveform duration, and whether the point is selected..
④Two USB Ports: This regulated power supply is equipped with two USB ports. Rear USB interface (upgrade program, upper computer control interface).
front 5V 1A USB interface can be used to charge mobile phones..

Input voltage range： DC 3 -40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
Output voltage range：Output: DC 1.5 - 35 V voltage is continuously adjustable, maximum output current is 3 A.
8 pieces of LM2596 board and heat sinks included.
Easy to make it work and convenient to accurately adjust the output voltage with a mini screwdriver..
100% SATISFICATION SERVICE: If there are any problem with our products, please feel free to contact us. you can request a refund for any single module....

【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state....
【Input Voltage】DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost)..
【Output Voltage】DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A..
【Mini Size】45 * 23 * 14 mm (with potentiometer). 6pcs included..
【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue....

DROK DCDC converter input voltage range is DC 4.5-40v, output voltage range is DC 1.25-37v, the voltage is continuously adjustable. It is a non-isolated buck converter, can dial down voltage from 36v 30v 24v to 12v 5v 3.7v 3.5v 3.3v 2v..
Analog Control: Our DC buck converter is designed with a adjustable potentiometer, the output voltage can be easily and accurately adjusted with a mini screwdriver. Clockwise to step up voltage and counterclockwise to step down voltage..
Protection: This power supply supply step down regulator is with over-temperature and short-circuit protection, which protect your device from damaging and enhance its safety when using..
Low Power-consumption: Although the voltage range is wide, this buck voltage module has a low power consumption of only about 3A when in static state..
Note: Please make sure the input voltage is at least 1.5V greater than output voltage to ensure stable output.
please note that there is no reversed connection protection, so check the polarity of input voltage before power on to avoid burning due to reversed connection.
please add heatsink when the output power is larger than 15W..

High Voltage Generator:Input Voltage: DC 6V to 12 V.
High Voltage Generator Cables: Output Cable Length: About 100mm.
Input Cable Length: About 100mm(Red is Positive).
High Efficiency: Voltage Generator Modules are Made of a High-Voltage Transformer Through a Circuit of Components and Using the Principle of Tesla Coils , Output High Voltage Pulse,High Efficiency.
Easy to Connect:High Voltage Generator come with Input and Output Cables and the Peripheral Circuit is Simple,Just Connect the Cable with the Switch and Battery and the Discharge Intensity is Great.
Wide Application: High Voltage Generator Can Be Used for Student Science Experiments, Electronic Instruments,Anion Generators,Science Small Productions and etc..

Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
Output: DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A.
Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down).
Features: all use SANYO solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output.

The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can....
DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost)..
DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A..
The LM2596 buck module input and output interface can not be reversed. The input voltage must be higher than the output voltage..
Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed....

Output Power Capacity: 3500 Watts / 5000 VA Max Configurable Power: 3500 Watts / 5000 VA Nominal Output Voltage: 208 V Output Voltage Note:....
Output Voltage Distortion: Less than 3% Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Crest Factor: Upto 3:1 Waveform....
Nominal Input Voltage: 208 V Input Frequency: 50/60 Hz +/-5Hz (auto sensing) Input Connections: NEMA L6-30P Cord Length: 3.05 meters Input voltage....
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte - leakproof Included Battery Modules: 2 Typical recharge time: 2.5....
Interface Ports: Smart-Slot Pre-Installed SmartSlot Cards: AP9619 Control panel: LED status display with load and battery bar-graphs and On Line - On....