Reviews Valve gas Regulator gas Pressure Regulator

iSpring 14702 APR40 Pressure Regulator Filter Protection Valve with 1/4\ Quick Connect, 40 Psi, white

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 4" - 8" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as 13/16 inch..
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16"..
  • MARKING - Model: RV47L, Marking: 1/2 PSIG, Po 4" - 8". Inlet pressure 1/2 PSI. Adjustable outlet pressure 4" - 8" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Overall Dimension: 2-7/8” W x 2-1/4” D x 2-1/2” H. This is a small size regulator. Refer to pictures for detailed dimensions..
Check Stock

Turbo Torch 0386-0849 NFM-TT Nitrogen Flow Meter

  • Provides precision gas flow control for nitrogen-purging applications.
  • Use with any nitrogen-purging regulator equipped with a 7/16" - 20 male flare.
  • Controls the flow of nitrogen gas through copper tubing while brazing.
  • Excellent accessory to the Turbo Torch Nitrogen Purge Kit and Nitrogen Purge Regulator.
Check Stock

Maxitrol RV48L Natural Gas Pressure Regulator 1/2 FPT Thread 13/16 In and Out Opening 1/2 PSIG In 3 -6 WC Out

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
  • MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....
Check Stock

TMCRAFT Keg CO2 Regulator, Dual Gauge CGA-320 Pressure Regulator with 0-60 PSI Working Pressure & 0-3000 PSI Tank Pressure, Kegerator Regulator with Safety Pressure Relief Valve

  • Dual Gauge & Stable Pressure: TMCRAFT upgrade regulator is equipped with dual pressure gauges to clearly display both the working pressure (0-60psi) and tank pressure (0-3000psi), easy to adjust and stabilize the pressure by rotating the adjustment knob..
  • High Quality: TMCRAFT CO2 upgraded beer regulator is constructed of forged premium brass for strong durability and high reliability. Dual gauges can accurately measure working pressure in the system and CO2 tank pressure, each gauge is equipped with a rubber protector to prevent breakage..
  • Sealing & Anti-Backflow: TMCRAFT CO2 keg regulator features a high-quality crafted pressure release valve, a durable thick washer ensures a tight seal at the inlet to avoid liquid backflow and air entering, and the hose clamp is provided to prevent any kind of gas leakage. .
  • Wide Applications: TMCRAFT CO2 regulator with CGA-320 inlets can be easily connected to a CO2 tank. Connect gas line ( ID 5/16”) and keg coupler to fit most American kegs. It is convenient to use in commercial environments like beer bars, restaurants, breweries, etc..
  • 100% Lifelong Warranty: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our regulator or it does not perform to your expectations. we w....
Check Stock

CANTESCO K803W White Dye Penetrant Kit, Water Washable

  • ...deal exposure to the flame center spot thanks to the suitable chamber volume. Meanwhile, the 1.5 mm pure iron cold-rolled plate case is relatively rigid and durable for long-term usage..
  • Balance Right Temperature: This farrier forge can function by adjusting the gas pressure via spinning the knob on the gas pressure regulator. Additionally, the ball valve can switch the gas output independently. The push-pull oxygen port switch is convenient to operate..
  • Blacksmithing Forge Kit: We provide a complete kit of forging accessories to fit our propane forge, including a pair of high-temperature gloves, a tong, 4 gas hoses, a gas pressure regulator, 3 refractory bricks, a support frame, 3 burners, 8 throat hoops, 1 PTFE tape, 3 air chocks, a cross, and 2 handles. You can create your blacksmithing works at will..
  • Steps for Usage: Here are some basic instructions for how to use this propane forge knife maker. Firstly, put the fire brick into the forge. Secondly, put a lit combustible into the forge. Then, open all the gas inlet valves. Finally, adjust the gas pressure to control the firepower depending on your need..
Check Stock

VEVOR Farrier Furnace with Three Burners Large Capacity Portable Metal Propane Knife Forge, 3, Black

  • ...deal exposure to the flame center spot thanks to the suitable chamber volume. Meanwhile, the 1.5 mm pure iron cold-rolled plate case is relatively rigid and durable for long-term usage..
  • Balance Right Temperature: This farrier forge can function by adjusting the gas pressure via spinning the knob on the gas pressure regulator. Additionally, the ball valve can switch the gas output independently. The push-pull oxygen port switch is convenient to operate..
  • Blacksmithing Forge Kit: We provide a complete kit of forging accessories to fit our propane forge, including a pair of high-temperature gloves, a tong, 4 gas hoses, a gas pressure regulator, 3 refractory bricks, a support frame, 3 burners, 8 throat hoops, 1 PTFE tape, 3 air chocks, a cross, and 2 handles. You can create your blacksmithing works at will..
  • Steps for Usage: Here are some basic instructions for how to use this propane forge knife maker. First, put the fire brick into the furnace. Next, open all the gas inlet valves to release gas in a small volume. Then, ignite the gas. Finally, adjust the gas pressure to control the firepower depending on your needs..
Check Stock

gohantee Fire Ring Burner Valve Assembly Kit, 12 inch Stainless Steel Fire Pit Installation Kit for Propane Gas, Replacement Parts for Propane Gas Fire Pit, Outdoor Fireplaces 90000 BTU

  • [ WIDE APPLICATION] The Installation Kit replacement for propane gas fire pit, compatible with fire pit system with low pressure less than 90000 BTU, please do not use it in high pressure fire pit system to avoid damaging your equipment..
  • [UNIQUE DESIGN] The kit includes 5FT low pressure QCC inlet connection propane regulator and 5FT low pressure extension hose with key control valve, which can meet your fire pit installation needs. The control key valve can be opened and closed to control the gas entering and the fire can be adjusted by controlling the gas entering. Improving propane burn efficency, reduces sooting normally associated with propane. Worked perfectly for your outdoor propane fireplace project..
  • [ PREMIUM QUALITY ] Air mixer valve kit made of 304 stainless steel and brass with connector 3/8" male fitting, making them extremely durable. 90 degree elbow air mixer valve is good for the constructions. Strict quality control standards to build and test and ensure you safe leakage free operation while providing excellent weather resistance..
  • [EASY TO INSTALL] This propane fire pit installation kit including 12 inch double burner ring with includes 5FT low pressure QCC inlet connection propane regulator and 5FT low pressure extension hose. Pret....
Check Stock

Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon and CO2 Welder Tanks CGA580

  • ARGON/CO2 REGULATOR FOR WELDING: Terrabloom Argon Gas Flow Meter Regulator is Designed for Professional TIG/MIG Welding Applications. It Provides an....
  • ARGON FLOWMETER WITH PRESSURE GAUGE: In addition to allowing to adjust gas flow rate, our Argon CO2/Argon flowmeter contains a pressure gauge that....
  • TIG/MIG FLOWMETER INSTALLATION: TerraBloom Welding Pressure Regulator Seamlessly Connects To Standard Argon/Helium/CO2 Tanks with CGA-580 Inlet....
  • VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • WARRANTY: Covered by TerraBloom's 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • 【Hight Quality & Sturdy Argon Regulator with Hose】Argon flow gauge regulator's body is made of high-quality brass, being sturdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one u....
Check Stock