Reviews Valve Sight Glass

DERNORD Sanitary Sight Glass 1.5 Tri-clamp with Stainless Steel 316 Cage Protection

In-light Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
In-line Sight Glass with Clamp End, SUS316 body material.
Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal....
The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.

Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
1/3 HP, 115V/60 Hz thermally protected motor.
Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.

Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
1/3 HP, 115V/60 Hz thermally protected motor.
Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.

The ROP Shop replacement 3/4″ Shaft, Horizontal Triplex Pump for Pressure Washer with 3600 PSI and 2.5 GPM.
Specs – Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM, 6.5 HP, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 3/4″ Horizontal Shaft. Refer to images 2 and 3 for more information.
Pump comes with built in Unloader, Chemical Injector, Thermal Release Valve, & Oil Sight Glass.
When installing, please ensure that the keyway is in place before running your pressure washer.

HIGH VISIBILITY COLORED FRONT SIGHT POST: Glow-in-the-dark photoluminescent paint aids visibility and quicker target acquisition in transitional light.
SUBDUED REAR SIGHT: Angled and serrated surface to reduce glare, and black painted rings to enhance focus on front sight.
"U" NOTCH REAR SIGHT: Specifically designed rear notch enhances front sight acquisition.
TRITIUM-PHOSPHOR LAMP: Tritium-filled glass lamp provides superior illumination in no light or low light settings.
FITS: Walther PPS, PPX, and PPS M2 models.
Tritium-filled glass lamp provides superior illumination in no light or low light conditions.
Green lamps are warranted for 12 years from the date of manufacture.

IRRIGATION VALVE BOX: Houses and protects irrigation system components from damage and keeps them out of sight.
Fits over a single valve or underground irrigation accessories.
DURABLE PLASTIC: Structural reinforcing ribs provide support and strength to protect items housed inside against damage.
Made of durable PP treated with UV inhibitors.
SECURE COVER PROTECTS AGAINST DIRT: Overlapping cover prevents dirt and debris from entering the box.
EASY ACCESS: Pipe hole facilitates irrigation pipe connections without having to dig under the box.
Comes with one 6 in. round valve box and cover.

...more than 90 refrigerant data, that is, almost all refrigerant types. So please don't worry that the gauge is not suitable for your refrigerant system..
[Digital Dual Gauges] - Low pressure is shown on the left and high pressure is shown on the right. The gauge adopts ball valve design and high-precision sensor, which makes the fluoride addition more accurate..
[Quality Accessories] - The 1.5m three-color fluoride pipe adopts acid and alkali resistant glue, which is explosion-proof and pressure-resistant, and has good air tightness. Thickened portable outer case can better protect the product.(Please notice that two 9V batteries are NOT included in the package.).
[Multifunction] - 3 working modes: refrigerant pressure mode, vacuum percentage mode, leak detection mode. 5 pressure unit conversions: KPa, Bar, PSI, InHg, KgF/cm². 2 temperature unit conversions: ℃ & ℉..
[Explosion-proof Sight Glass] - Through the high-definition glass window, the flow of refrigerant can be clearly observed, so problems can be found in time, so that problems can be detected in time..

...0Psi (-1~17Bar), high pressure gauge range: 0-500Psi (-1~35Bar), it will help you get accurate readings in a short time. Extra large and colored dials with Celsius degree unit meets the needs of users..
【3 Colored Code Hoses】Includes 5Ft(1.5M) long enough 3 color charging hoses, thickening hose body with precise valve core depressor and 45 degree bend on one end for convenient accessing. Hose rated 500Psi max working pressure and 2500Psi burst pressure. Before using, please connect the blue hose to low pressure connector, red hose to high pressure connector and yellow hose to charge/release connector..
【Durable Structure】Made from solid brass, aluminum, PVC and durable plastic to stand up to heavy use and accidental drops – ideal for professional auto mechanics. Includes a detailed parts diagram and step by step instructions for DIY novices..
【Well-designed for Cars】New design of manifold gauge filling and vacuum port effectively prevents mist or leakage of the refrigerant can. Easy to operate and install, strong sealing for durability and safety-r134a manifold gauge set..

★ 60 inch long,1/4 inch yellow,blue,and red hoses feature a 800 PSI working pressure and 4000 PSI burst pressure – ideal for standard refrigerants.
★ Easy to operate and install,strong sealing for durability and safety.Necessary tools for HVAC,car air condition maintenance and coolant or Freon adding..
★ Manifold with built-in sight glass. Durable metal casing. Aluminum alloy testing manifold body R410A Connectors (2pc): 5/16″ SAE，refrigerant anti blowback fittings refrigeration charging hoses valve discharge conditioning refrigerant charging refrigerant discharge recharge yellow jacket interdynamics conditioning recharge bundle refrigerant liquid hose.
★ refrigerant charging hose with Diagnostic Manifold Gauge Set deigned to meet 1/4″ SAE requirement for refrigerant permutation, fit most refrigerants like R410A, R22,R404.Standard 1/4 inch female flare fittings with a valve core depressor and 45°bend on one end for convenient access to the system.
★100% satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!.