SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • ...ehicles. Note: please make sure you have enough space to install before purchase and make sure your exhaust size is 3.0 inch. Professional Installation is highly recommended. 3.0” Cut-out valve Kit included: 1 x 3.0” exhaust pipe cutout valve with motor, 1 x extension harness (Length: 3.5M), 1 x wireless remote control (without battery), and 1 x control box with cigarette lighter plug..
  • Function: This Cut Out Valve System Kit is specifically designed for single exhaust pipe and made to enhance the performance and power of your vehicle by remotely controlling of cutout valve. The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. ....
Check Stock

MEIMEI Multi-Way Soda Bottles Shrimp Eggs Incubator Hatchery Artemia Hatchery kit DIY Aquarium Fish Tank Hatch Tool (3 Way Hatchery kit)

  • Step 1:Install all accessories as our picture with your air pump and soda bottles, add suitable water and salt ,brine shrimp eggs into your soda bottles, air control valve opened and brine shrimp outlet control valve closed, turn on your pump..
  • Step 2: After the hatching of the brine shrimp eggs, stop the pumping and let stand for about 10 to 30 minutes. The hatched shrimps will sink to the bottom and the shrimp shells will float up..
  • Step 3: Close air flow control valve, open brine shrimp outlet control valve to collect brine shrimp..
  • Package include:Soda Bottle Hatchery Capsx3+ 1-way control valvex3+ 3-way control valvex1+oxygen pipe x 3M+check valve x3.
Check Stock

Motorcraft DPFE6 Exhaust Gas Recirculation Pressure Feedback Sensor

  • [Fitment] - 7.3 IPR valve + ICP control sensor fit for Ford E-350 Club Wagon 03, fit for Ford F-250 F-350 F-450 Super Duty 99-03, fit for Ford F-750 99-03, for Ford F-250 Super Duty 01-03, fit for Ford E-350 Econoline Club Wagon 97-02, fit for Ford E-550 Econoline Club Wagon 02, fit for Ford E-450 Econoline Super Duty Stripped 01, fit for Ford Excursion.for 01 Ford F-650 00-01, fit for Ford E-450 Econoline Super Duty 00, fit for Ford F-250 F-350 97 - 7.3L Powerstroke ONLY.
  • [Part Number] - 7.3 IPR fuel injection pressure regulator valve replace F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
  • [Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
  • [Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment and perfect replacement, meets or exceeds OEM standards. We offer 2 years service, any questions about the product, pls contact us in ....
Check Stock

Stanbroil Natural Gas Connection Fire Pit Installation Hose with 1/2\ Chrome Key and Quarter-Turn Shut-Off Valve

  • Include: (2) 60” long black hoses, (1) 1/2” chrome key valve (3” long key)and all necessary fittings..
  • Heat and scratch resistant, making them extremely durable..
  • Easy to assemble and install natural gas fire pit installation kit with chrome key valve..
  • The DIY natural gas fire pit installation kit contains everything you will need to hook-up your fire pit..
  • Used with outdoor, vented and natural gas fire pits, barbeque islands, fire pit tables and outdoor fireplaces..
Check Stock

Water spigot lock,very strong outdoor faucet cover lock,gate ball valve lockout

  • High quality structure:made of ABS engineering plastics. High temperature resistance and impact resistance.
  • Suitable for 1“-2.5“ diameter valve handle(Please confirm the size of the valve handle diameter and the product before purchasing to ensure that the product fits your valve handle diameter).
  • A hollow circular shell surrounds the handle of the gate valve and needs to be used with a padlock to help prevent the valve from opening during maintenance and repair.
  • Note: lock and key are not included. If necessary, please purchase valve lock with padlock and warning tag.
Check Stock

RuggedMade 25 GPM Hydraulic Log Splitter Directional Control Valve, Auto Return Detent Lever Handle, 2750 PSI (1/2\ Work Ports)

  • SPECIFICATIONS: This 2 spool valve from Chief’s G Series is a directional control valve with a joystick, 2 spool spring to neutral tandem center, 10 GPM flow rate, SAE 8 work, and SAE 10 inlet/outlet ports. Its maximum working pressure is 3625 PSI..
  • HIGH UTILITY: Our hydraulic valve 2 spool has wide-ranging utility since it can be effortlessly shifted in 3 different positions, providing increased directional control of the actuators. The 3 pos setup also reduces heat buildup..
  • CONSISTENT: The log splitter valve has a spring to neutral tandem center and is therefore consistent, making it a great support for fixed-volume pumps. It is not only economical but also low maintenance..
  • MADE TO LAST: With an alloy steel body, this directional control 4-way valve is highly corrosion resistant and withstands even melting temperatures. It is extremely ductile and can outlast other similar products available in the market..
  • EASE OF USE: With a joystick control in tow, our hydraulic joystick valve offers a single push-pull and up-down control on all valves. It cuts down the force feedback from the system to the operator..
Check Stock

Mudder Bpv31 Piercing Valve 134a Kit R134a Refrigerant Charge Hose with Gauge, Hose Refrigerant Can Tap with Gauge R134a Can Connect to R12/r22 Port Ac 1/2 and Universal Retrofit Valve with Dust Cap

  • Package content: 3 packs BPV-31 piercing tap valve kits (each kit contains 1 piercing valve, 1 hex key and 2 adapters), including R134a U-charge hose with gauge and can tap, universal retrofit valve with a dust cap, 5 packs in total, bring you more convenient for replacement.
  • All our replacement kits are made of corrosion-resistant metal that won’t wear out or rust over time, with anti-leaking design that will be safer for you.
  • Easy to install: our BPV-31 piercing tap valve kits come in compact design that only requires a 2-inch clearance area for installation and use, and you only need 1 hex key wrench (included) to install the kit.
  • If you want to attach the gauge with BPV piercing tap valve, you need a retrofit valve (included).
  • R134a Charging hose: 19 inch hose with R-134a can to R-12/R-22 service port connection, 1/2 inch end fits R12, 22, 502 fittings.
  • And the gauge has scale readings for R134, R12, and 22. 90-degree push and lock coupler with auto shut off.
  • Replace model of BPV-31 piercing tap valve: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
  • Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch ....
Check Stock

Boskavalo 64219310349 Heater Control Valve 64119310349 for BMW F01 F02 F10 F11 F12 520i 523i 528i 740i 740Li 750Li

  • 【FITMENT】 - 100% Brand new, brand guarantee, bear any after-sales problems. Heater Control Valve .Replacing OE numbers are 64114271156, 64119119164, 64 21 9 310 349, 64219310349.
  • 【QUALITY】 - Each Heater Control Valve is manufactured to the same specifications as the factory actuators. Each actuator is constructed with precision machined parts and includes new oil seals for a leak free installation. Standard performance & durability TS16949 Certified Manufacturer..
  • 【FUNCTION】 - Heater Control Valve,Turn on or turn off the water flow of the heating water tank. When the weather is hot, the water valve is closed, and when the weather is cold, it opens to heat the interior of the car.
  • 【INSTALLATION TIPS】 - To ensure safety and normal usage of our product,please let professional auto mechanic to install this Heater Control Valve.
  • to avoid damaging the mechanic or causing accidents,please do not dismantle the products.
  • 【NOTICE】 - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our Heater Control Valve . Please contact us if you have any question regarding our this product.
Check Stock

Bach BTR301S (Silver) Student Trumpet

  • Key: Bb Bore: .459-inch Leadpipe: Standard Leadpipe Material: Yellow Brass Bell: 4-13/16-inch One-Piece Hand-Hammered with Flat Rim Bell Material: Yellow Brass Valves: Monel Pistons 1st Valve Slide Adjustment: Split Ring 3rd Valve Slide Adjustment: Fixed Ring Features: One-Piece Hand-Hammered Bell with Flat Rim.
  • Two Sets of Valve Guides (Brass and Plastic).
  • Deluxe Bell Engraving Case: C190DBL Delu.
Check Stock