Reviews V cutting Copper Fiber

2 Pieces CFS-3 Fiber Optic Stripper 3 Port Hole Fiber Optic Stripping Tool with 6' handle - Hex Key Adjustable For Jacket, Buffer, and 125μm-250μm Coating Stripping

  • 【Ergonomic design Handles】 It is comfortable to hold, and reduce hand fatigue.The jaws have been adjusted before leaving the factory, no need to adjust, delivering top performance on client sites making it Ideal for use on both FTTH and industrial fiber networks including FTTX, FTTB & FTTP systems..
  • 【Three-port design】Hole (1) 2 - 3 mm fiber jacket cuts down to the 600 - 900 micron buffer coating. Hole (2) strips the 600-900 micron buffer coating down to the 250 micron coating. Hole (3) cleanly strips the 250 micron cable down to the glass fiber..
  • 【High accuracy】 For stripping 250 micron buffer coating from 125 micron optical fiber,All stripping surfaces are manufactured to precise tolerances to assure clean,smooth strips. Precision Diameter Hole & V-Opening in Blade allow for accurate buffer coating removal,Every fiber stripping tool is tested after production to ensure a consistent high quality cut out of the box..
  • 【Easyly Adjustable】Precision tune this Fiber Stripper with a 1.5mm Allen Key included. Our Fiber Cable Cutter hex key ensures more accurate cable cuts than a conventional stripper..
  • 【Brand Service】18 months of after-sales service give your good shopping experience. If you have any problem, please contact us, we will solve....
Check Stock

GYROS 1.5” Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory | Made in USA 11-32156/12

  • ...utting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 40-00470 is compatible. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010.
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 12 high-quality cutting wheels which are 1 1/2 inch in diameter and 1/32-inch-thick with a center hole of 1/8 inch, with a maximum speed of 45,000 RPM and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

GYROS 2” Mini Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory. Made in USA 11-32208/12

  • ...utting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 40-00470 is compatible. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010.
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 12 high-quality cutting wheels which are 2 inches in diameter and 1/32-inch-thick with a center hole of 1/8 inch, with a maximum speed of 30,000 RPM and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702

  • ... Professionals and hobbyists looking for the best rotary tool accessories for Dremel and other top-brand rotary tools will appreciate the Gyros Fiber Disk LT Multi-Set..
  • Low Tensile Strenght – Gyros LT mini cutting discs are designed to cut a variety of materials, including Wood, Plastic, Stone, Ceramic, Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of Rotary Cutting Tools, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 80-18100 for optimal results. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010.
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting wheels which are 1 3/4 inch in diameter and 1/32-inch-thick with a center hole of 1....
Check Stock

Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002

  • ...rticularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best results use with Gyros Stainless Steel Mandrel SKU 80-18100. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010..
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting wheels which are 2 inches in diameter and 3/64 -inch thick with a center hole of 1/8 inch, with a maximum speed of 30,000 RPM, and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

Plasma Cutter Max Cutting Thickness 20MM 50A Inverter DC Inverter 110/220V Dual Voltage Cutting Machine with Free Accessories Easy Cutter Welder,Making Our Planet More Productive

  • Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the....
  • Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut..
  • Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials..
  • Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control..
  • Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need..
Check Stock

Sonew PIN Type Copper Busbar, Conductivity Line 63А 2P 12 Way for Circuit Breaker Distribution Box 230‑415V

  • The electric copper busbar is suitable for connecting to C45 type, DZ47 type, IC65N type and other small circuit breaker air switches. Circuit breakers used in working condition enterprises, construction sites, schools, hotels, homes and other places..
  • The PIN TYPE line is made of red copper. The busbar has the characteristics of high current carrying capacity, good conductivity, large overcurrent, convenient wiring and not easy to oxidize..
  • The PIN TYPE copper busbar adopts PVC dust-proof casing to protect the internal aging, and has the characteristics of insulation and not easy to break..
  • The copper current and voltage lines are exquisite and meticulous in workmanship, and will not cause serious wear and tear due to excessive installation, and cannot be re-installed..
  • The 2P 12-way copper busbar has a rated current of 63А and a rated voltage of 230-415V, which can be cut according to the needs of use.
Check Stock

Zoostliss Battery Kill Switch Isolator Disconnect Cut OFF Power for Vehicles Marine Car Boat RV ATV

  • STURDY & FULLY ENCLOSED SHUT OFF SWITCH: The Heavy Duty Cut Off Switch is made of ABS plastic housing and copper tin plating inner stud. Fully enclosed design to protect wiring from dirt, corrosion, and rain. This is the best choice in harsh ocean conditions..
  • COMPATIBILITY & SAFETY: This Battery Kill Switch Used for DC 12 - 48V systems to isolate and secure the electrical system.
  • eliminate any power draw from the battery when vehicle is not in use, disconnects the battery safely.
  • provide a reliable way to shutdown electrical power during maintenance and protect batteries from excessive drain..
  • EASY TO OPERATE: On/Off 2 position, Suitable for various 12 V/24 V/48 V systems. Current voltage: rating at 275 A continuous (1 hour) at 48 V DC and 1000 A for 5 seconds. Clockwise to turn on , counter clockwise to turn off..
  • WIDELY APPLICATION: Battery isolator switch is universal used for RV, Marine, Car, Boat, Camper, Travel Trailer, Truck, ATV, UTV battery and other engine application, makes it an effortless job of turning the battery on and off..
  • PACKAGE INCLUDE: Equiped with 1* Battery Switch, 4 Pcs Mounting Bolts, 4 Pcs 2*3/8 Copper Ring Terminals, 4 Pcs Heat Shrink Tubings and a hex wrench, which can provide great convenience for your installation. If you ....
Check Stock

Jonard Tools RCS-50RB Replacement Blade for RCS-50 Submariner Cable Jacket Slitter

  • MDC-14, MDC-28, MDC-64: Have triangular blades that provide square and straight cuts by holding the tubing in place.
  • FS-1416: Allows you to score and ring 14/10 and 16/10 fiber optic microducts without any adjustments to the tool.
  • TC-300: Performs radial cuts on 1/4" to 3" (6.3 - 76 mm) copper, brass, aluminum and plastic tubes.
  • RCS-30: Creates mid-span slits and window cuts in large ducts and heavy-duty cables using a unique ratcheting design.
  • H-90: Rugged 21 Pocket Tool Case neatly stores these tools.
Check Stock