Reviews V 35 Interface

Avomoco 3.1 128GB 3 in 1 High Speed OTG Pen Drive for Android Phones with Micro/Type C/USB C Ports ,Photo Memory Drive for Android Phones Samsung Galaxy,LG,Google Pixel,Moto,Hua Wei and Tablets,Pc

✔:The flash drive works with Android Smart Phone, for Samsung GalaxyA20,A50,A60,A70,A71,A80,A90,A10,M30,S10.S10+,A50,S8,S8+,S9,S9+,S20,Note7,8,9,10,20,A5(2017)A6S,A9S,Google Pixel, LG V35 ,V30,V20,G5,G6,G7,Q8,LG Stylo 4,Hua Wei,one plus. etc..
✔:For Samsung Galaxy S7,S6,S5,S4,S3.J7,Note5,Note4,Note3,Note2.A5(2016),A7,A8,A9,C5,C7.LG V40,G4,Q7,LG Stylo3.etc..
✔:Extra storage for your mobile device for photos, music, videos and other files.Preserve life’s cherished memories and wonderful moments for years to come.
✔:NOTE: Before inserting the photo memory drive, please take off the protective cover of the mobile phone first, in case the photo stick interface and the mobile phone interface cannot be fully contacted , the mobile phone cannot recognize the photo stick. Compatible with all the Android smartphones and tablets with OTG function.In the video category at the bottom of the details page, there are operation videos of the photo stick on different models of mobile phones for viewing..
✔:1 year after-sales service. Give you great value for every cent you pay. Take advantage of the 1 years free Service that could bring safety and happiness to your mind. Report in.

The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can....
DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost)..
DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A..
The LM2596 buck module input and output interface can not be reversed. The input voltage must be higher than the output voltage..
Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed....

Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable..
Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS..
TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently..
Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..

The induction heating boards maximum power is 1800W, adopted super PCB layout design and super heat sink, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc.
The induction heating circuit adopt 12-48V DC power supply, maximum current is 40A, the power uo to 1800W. It can work continuously under the condition of good heat dissipation. moderate power which make it can be used to quenching, annealing and other heat treatment. also for melted with graphite crucible kim/silver/ copper/aluminum and so on, heating is evenly and fast.
it is recommended that not exceed 48V 35A to prevent accidents and damage,Although withstand more than 40A current.Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, which is very dangerous.More than 24V/20A power supply, the greater the voltage/current, the greater the heating power, heating faster..
please check the power output meets the requirements if the MOS tube fever,and be sure to do a good job of cooling.Do not empty the board, otherwise it will create a very high noise, then MOS tube will burn out.

48V PHANTOM POWER：the stage/studio sound mixing console features a +48V phantom power supply.
2 channel audio interface controller DJ mixer machine by Pyle is the perfect way to mix audio from mic, and bluetooth connected devices. Each channel has its own independent volume control.
Combo jack XLR+6.35mm for mic/line/guitar inputs, independent 3.5mm stereo input jack,& a 3.5mm headphone jack. Produce creative remix which is perfect for DJ party/music recording.
This personal mixer has a USB soundcard and audio interface to record and connect to MAC or PC and it has universal digital audio file compatibility..
Suitable for home, KTV, studio, stage live performance and so on.Perfect for both beginners.

Package include: 1 Piece Graphic Card Fans with 1*Power D-type Interface cable.
Dimension: 92mm(L) x 92mm(W) x 25mm(H) / 3.62in(L) x 3.62in(W) x 1in(H) in per fan. Totally Size: 185mm(L) x 120mm(W) x 30mm(H) / 7.28in(L) x 4.72in(W) x 1.18in(H).
D-type interface cable included four interfaces, three voltages: 5V 7V and 12V.
Different voltages with different airflow, speed, and noise. you can select the appropriate voltage interface to start the fan..
2 fans combined into one interface, Can be connected to the motherboard’s 3-pin or 4-pin interface and you only need to access one interface to run all the fans..

❤️ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
❤️Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
❤️ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
❤️TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
❤️Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.

Package include: 1 Piece Graphic Card Fans ( 3-Fans connected ) with 1*Power D-type Interface cable.
Dimension: 92mm(L) x 92mm(W) x 25mm(H) / 3.62in(L) x 3.62in(W) x 1in(H) in per fan. Totally Size: 276mm(L) x 120mm(W) x 30mm(H) / 10.86in(L) x 4.72in(W) x 1.18in(H).
D-type interface cable included four interfaces, three voltages: 5V 7V and 12V.
Different voltages with different airflow, speed, and noise. you can select the appropriate voltage interface to start the fan..
3 fans combined into one interface, Can be connected to the motherboard's 3-pin or 4-pin interface and you only need to access one interface to run all the fans..