Reviews Utility Anchor

Mxeol Claw Anchor 4.4 lb Pontoon Boat Anchors Galvanized with Stainless Steel Chain Shackles 1/4 inch (Silver, 4.4lb)

  • Boat anchor 4.4 pound is made of galvanized carbon steel with 2 meters stainless steel anchor chain 1/4 inch and ss shackles 1/4 inch..
  • Boat anchors kit claw anchor 4.4 lb with 2 sizes options: 4.4lb (2kg), 8lb (3.5kg)..
  • Sea anchor for boat is with ideal sizes. 4.4lb anchor fits 12 to 16 feet boats, 8lb anchor fits 17 to 24 feet boats..
  • Marine anchor fits most bottom types as boat sand anchor or shallow water anchor, etc., holds in a variety of seabed, The claw anchor sets quickly, stows easily on the bow roller..
  • Pontoon boat anchor is all purpose anchor which remains stable even when tide and wind conditions change..
Check Stock

Household Hand Tools, 86 Piece Tool Set With Roll-Up Bag by Stalwart, (Hammer, Wrench Set, Screwdriver Set, Pliers) - Great for the Home or Car - Pink

  • ...set has everything you will need from hammering, screwing, measuring, cutting and more..
  • SET INCLUDES – Two Flat Head Precision Screwdrivers, Two Phillips Head Precision Screwdrivers, 7 oz. Hammer, 10 ft. Measuring Tape, Needle Nose Pliers, Adjustable Wrench, Two Plastic Utility Clamps, Screw and Dry Wall Anchor Set, 8" Zip Ties, Utility Scissors, SAE Hex Keys, Metric Hex Keys, Multi-Bit Screwdriver Set, Screwdriver, Ratchet Set, Ratchet, Drive SAE Sockets, Drive Metric Sockets. Please see Product Description for detailed tool information..
Check Stock

Yaheetech 4-Tier Kitchen Bakers Rack with Storage Cabinet and Hutch, Microwave Oven Stand Coffee Bar Pantry Cabinet with 8 S Hooks, Freestanding Kitchen Shelves Spice Rack, Gray

  • ...et can hold microwave, toaster, countertop oven, or coffee maker just fine. Hook your potholders, mugs, dishcloth dry and clean on the side bars, and better yet, the roomy bottom cabinet keeps your kitchenware essentials corralled..
  • All-round storage rack: This multi-level utility storage shelf with multi-sized shelving tackles everything from kitchen essentials to living room items. It serves perfectly as a coffee bar, a microwave rack, or a living room shelving unit..
  • Substantial construction: This utility storage shelf is constructed of 0.6’’ thick manufactured wood and supported by a powder-coated metal bracket. The overall weight capacity is up to 110lb. Two safety straps help anchor the rack to the wall for improved stability..
  • Adjustable screw-in feet: Four protective foot pads help prevent leaving scratches on the hard floor and the screw-in installation can adjust and level the rack to the floor..
  • The charm of rustic: This kitchen baker’s rack can round out your farmhouse or rustic industrial interior design. It combines distressed woodwork with matte iron frame, cap....
Check Stock

Orion Motor Tech 21PCS Master Ball Joint Press | Upper and Lower Ball Joint Removal Tool | Automotive Mechanic Tool Set

  • ...OTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with all the receiver tubes and removing/installing adapters needed to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty ABS plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tube, 1x Removal Adapter, 1x Screw, 1x Sleeve..
  • ORION MOTOR TECH - We pursue outstanding quality ....
Check Stock

VEVOR Anchor Chain, 10' x 5/16" Galvanized Steel Chain, 3/8" Anchor Chain Shackle, 11650lbs Anchor Lead Chain Breaking Load, 9460lbs Anchor Chain Shackle Breaking Load, Anchor Chain for Boats, Ship

  • 【DURABLE GALVANIZED STEEL】- Our marine 10 feet boat anchor chain is made of galvanized steel 5/16" with two 3/8" bow buckles. Chain break load: 11,650 lbs. Shackles break load: 9,460 lbs. Increased durability of our chain will help properly set your anchor for years to come with superior construction..
  • 【6" EXTENDED ANCHOR CHAIN】- The heavy boat anchor chain has an additional 15 cm/6 inch based on 10 feet, which is convenient for you to use. If you are looking for a more reliable anchor chain, this is your solution..
  • 【TWO QUALITY BOW SHACKLES】- Large 3/8" galvanized steel bow shackles are designed to work with almost all anchor lines. Our thread bow shackles to avoid loosening and falling from the anchor chain..
  • 【RELIABLE ANCHOR CHAIN】- The use of an anchor lead chain enhances the anchor's holding power by keeping the shank parallel to the lake bed or seafloor, helping to eliminate unwanted pull-out or anchor freeing caused by wave motion or boat drifting..
  • 【WORK WITH DIFFERENT ANCHORS】- Our anchor chain can be used with almost all boat a....
Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

  • Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
  • Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
  • The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
  • The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
  • The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
Check Stock

Lewmar Galvanized Claw Anchor 22 Lbs/10kg for Boats 38 -44

  • TOP-PERFORMING ANCHOR— Our claw anchors have a one-piece design and easily sets in a variety of seabeds. This claw anchor also resets quickly giving....
  • BUILT TO LAST — This Lewmar claw anchor is made from a high-grade steel and galvanized for durability. They hold well in most bottom types and....
  • QUALITY DESIGN — The Lewmar galvanized claw anchor replicates the same design of the anchors used by the oil rigs in the North Sea. You can depend....
  • SIZED RIGHT —The galvanized claw anchor measures 14-13/16" W x 11-1/4"H x 21-1/4" L The anchor weighs 22 lbs. (40 kg). This anchor is for boats 30'....
  • TRUSTED BRAND — Our Lewmar 22 lb. claw anchor is made from the premiere equipment supplier- designing, manufacturing and distributing innovative,....
Check Stock

Better Boat 4 Foot 1/4\ Stainless Steel Anchor Chain and Double Shackle Link Ends Marine Grade

  • PREMIUM STAINLESS STEEL: Our Marine Grade 4 ft stainless anchor line is made from 1/4" 316 Stainless Steel along with 2 bow shackles also constructed from 316 stainless steel. Unlike the galvanized chain alternatives, these boat anchor chain options are designed to last and avoid corrosion..
  • SAFE AND RELIABLE: Our double threaded bow shackle pins prevent the screw from coming loose and falling from the anchor chain. The chain is abrasion resistant and weighted to properly keep your anchor shank parallel with the sea floor. The chain offers a 5110lbs break load while the shackles offer a break load of 5510 lbs..
  • COMPATIBILITY AND FLEXIBILITY: Our large 5/16" stainless bow shackles are designed to work with almost all anchor rope. Works great with our separately sold anchor lines and their pre spliced stainless thimble. The screw pin anchor shackles with chain will work with traditional fluke anchors, box anchor, spade anchor and others..
  • EASY SEAMLESS UPGRADE: Whether your upgrading your boat anchors and looking for a more reliable anchor chain, or outfitting a new boat, this is your solution. Not all chains are created equally, and we completely stand behind our stainless chains to provide superior performance. This allows you to worry about the anchor ....
Check Stock