Garrett Powermax Turbocharger for 04.5-07 Powerstroke 6.0L Turbo

  • Supports up to an additional 175 HP over stock with no sacrifice in drivability Performance upgrade or replacement for original equipment.
  • Note: The compressor housing is NOT polished as pictured!.
  • Fits 2004.5-2007 Ford Powerstroke 6.0l (Build Date After 9/22/2003).
  • Compressor Inducer Wheel Diameter: 64 mm Compressor Exducer Wheel Diameter: 88 mm Compressor Wheel Trim: 52 Compressor A/R: 0.58 Turbine Inducer Wheel Diameter: 73 mm Turbine Exducer Wheel Diameter: 66 mm Turbine Wheel Trim: 84 Turbine A/R: 0.90 Type: Stage 1 Supported Horsepower: 560 hp.
Check Stock

What Happened Mini Portable Car Vacuum Cleaner Handheld Vaccum 4000Pa 120W Suction Cleaning,Black

  • 1. Convenient vehicle-mounted vacuum cleaner, turbine blade design, 4000Pa strong suction.
  • 2. Deep cleaning, wet and dry use, easy to absorb paper scraps, ashes, hair, etc..
  • 3. Small and convenient, it can be placed in the water cup slot, center console, door pocket and other places in the car, does not occupy space, and is easy to take.
  • 4. Multiple filtration, dust and gas separation, cleaning, HEPA filter purification, repeated cleaning and use.
  • 5. The cleaning radius is large, and the trunk can also be easily cleaned, saving time and effort, and cleaning without dead ends..
Check Stock

Bonbo Turbine & Stator Shaft Teflon Seal Installer/Resizer Transmission Tool J-36418-C & ST-1503 for GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70E and 4L70L

  • J-36418-C Turbine Shaft Teflon Seal Installer/Resizer – For GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - UP transmissions..
  • 1503 Stator Shaft Teflon Seal Installer/Resizer – Used on GM 700-R4, 4L60, 4L60-E, 4L65E and 4L70E transmissions..
  • Great Function – This tool kit will effectively protect the Stator or Turbine Shaft Teflon seals from damage, tear and distortion during installation..
  • Direct Replacement – 1503 Stator Shaft Teflon Seal Installer/Resizer is alternative to Atec Trans-Tool T-1503, #39SS both in function and performance. J-36418-C Turbine Shaft Teflon Seal Installer/Resizer is a perfect substitution for Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long and T-1574-M..
  • Superior Quality – Made of premium and wear resistance aluminum alloy, sturdy, impact resistance and anti-corrosion for much longer service time. Won't easily crack or break like the cheap plastic ones..
Check Stock

WORX LeafPro Universal Leaf Collection System for All Major Blower/Vac Brands - WA4058

  • [UNIVERSAL FIT] Engineered to fit all major brands on the market, including gas and electric models with its variable fit connector.
  • [BLOWS RIGHT INTO THE BIN] Mesh hood fits over most 32 to 96-gallon waste containers for no touch, high capacity leaf collection.
  • [8-16FT HOSE] So you can move around a whole section of the yard without having to drag the collection bin.
  • [COMPATIBLE WITH] TRIVAC 3-in-1 (WG512), TRIVAC and accessories (WG524), TURBINE FUSION Leaf Blower, Mulcher & Vacuum (WG510).
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you....
Check Stock

Angel Chimes The Original & Traditional Decorative Swedish Candle for Christmas - Brass Chime with 16 Candles - Carousel, Authentic, Scandinavian, Decoration & Ornament for Home and Kitchen

  • Our carousel rotating candle holder is made of stainless steel, and the outside is treated with high-grade electroplating, which can last for a long time without rusting..
  • This rotary tea light candle holder is composed of exquisite metal patterns and glass cups. The top of the candle cup is supported by a turbine supported by a pole. After the candle is lit, the heat rises to promote the continuous rotation of the turbine..
  • After the hot rotating tea light candle holder is lit, the warm candle holder spreads over the entire room, and the rotating candle light happily jumps in the room, allowing you to have a good night..
  • This spinning candle holder is suitable for many occasions, such as bedroom, dining room, living room, study room, shopping mall, club, holiday party, wedding, various parties and so on..
  • Reminder: After the candle has been used, if you need to move it, please touch the candle cup below, and touch the pole, turbine and pendant above with your hands, because the rising heat will make the upper part of the candle holder very hot , It will be hot to your hands, need to cool for 15 minutes before touching..
Check Stock

4M Toysmith, Wind Turbine Science Kit, Green Science - STEM Toys Educational Gift, for Girls & Boys 5+

  • With 4M wind turbine kit, you can harness the power of wind and convert it into electricity by building your own turbine..
  • Watch the wind turbine capture the wind’s energy and turn it into light..
  • This kit will teach you how this vital renewable-energy technology works in a fun, recreational way. When completely assembled, The blade has a span of 13.3 inches..
  • The wind turbine kit from Toy Smith requires an empty two-liter soda bottle and a small Phillips head screwdriver (not included.).
  • This item is recommended for ages eight years and up..
Check Stock

Star Trek Discovery: The Girl Who Made the Stars

  • ✔ WIND TURBINE: The Discovery #MINDBLOWN Wind Turbine Glider Kit lets you convert wind energy into power for a motorized glider! It’s a cool experiment you build yourself..
  • ✔ MOTORIZED GLIDER: Your glider will sore into the air under power from your own wind turbine..
  • ✔ GREEN ENERGY: No outlets are needed. Just hold the turbine in the wind and it will turn the blades to generate electricity!.
  • ✔ COMPLETE DIY KIT: This neat engineering kit doesn’t require any batteries. The only thing you need is a small Phillips-head screwdriver to put it together..
  • ✔ SATISFACTION GUARANTEED: Making you a happy customer is our main goal. If you have any questions, please contact us and we will get back to you within 24 hours and provide the perfect solution.
Check Stock

Reed Walnut Nutracker Tool – Unique Tool Design to Crack Pecans, Almonds, English Walnuts, Brazil Nuts and Filberts – Made in the USA

  • The Reed Nutcracker by Turbine Industries is the best tool for cracking a wide variety of nut shells. This can be used for pecans, almonds, English walnuts, Brazil nuts and filberts..
  • This is a well made nutcracker made to be strong and resilient to breakage with a reinforced copolymer construction..
  • The Reed Nutcracker is made with a unique, simple and east-to-use design not found on other types of nutcrackers..
  • Turbine Industries proudly manufactures products right here in the USA..
Check Stock

FIEPARTS Fuel Pump Assembly Replacement for 2004-2008 for Mazda RX-8 1.3L E8592M

  • COMPLETE FIT: You can install FEIPARTS Fuel Pumps with complete confidence. They're nearly identical in dimension and appearance to the units they....
  • PLUG-and-PLAY: replacing a fuel pump can be a complex job,but our fuel pumps are designed as plug-and-play exact fit replacements-so customers can....
  • WHEN SHOULD YOU REPLACE: The first and most common symptom of a bad fuel pump that you should notice is a whining noise from the gas tank. This....
  • ADVANRAGE: Not only do these pumps offer near silent operation and improved drivability, the core components of this turbine design significantly....
Check Stock