Reviews Usb To Ide For Windows 7

USECL IDE/PATA 40Pin Disk to SATA Female Converter Adapter PCBA for Desktop & 3.5″ Hard Disk Drive Converter Port

3.5 inch IDE/PATA 40Pin HDD Drive to SATA converter Board Works, Compatible with all IDE/PATA 40 Pin Drives up to 1000GB..
Supports IDE 66/100/133MB/s No need for an extra power supply..
No driver needed, plug and play, unit is not hot swappable..
Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD disk drive..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..

for Desktop & 3.5" Hard Disk Drive , Works with all IDE 40Pin Drives up to 1000GB.
Supports IDE 66/100/133MB/s . Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD..
No driver needed, plug and play, unit is not hot swappable. Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..
3.5 inch IDE/PATA 40Pin HDD Drive to SATA Female Converter Adapter PCBA.

Supports 2.5-Inch IDE or 3.5-Inch IDE/SATA hard drives.
Supports 5.25-Inch Optical CD/DVD/Blu-Ray drives.
USB 2.0 connection allows for data transfer speed of up to 480Mbps.
Supported OS: Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10 and Mac OS 9.2 and above.

...ss the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer technical support and firmware update..

◆ USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
◆Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your ide to usb adapter to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
◆ Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
◆ AGPtEK sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable..
◆ This usb sata ide adapter is easy to use and plug & play, no drivers needed..

SATA hard drive can be detected and used as a standard 2.5" IDE hard drive..
Convert all SATA type devices CD-ROM/CD-RW/DVD-ROM/DVD-RAM/DVD-RW/HDD into 2.5" IDE device..
Allow to connect a 7+15P SATA hard drive to a 44P IDE connector..
7+15 Pin female design allows to connect directly to SATA hard drive without cables..
no driver installation is required. Compatible with any OS such as: Windows, DOS, Mac, Linux, etc. that support IDE/ATAPI....

USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your SATA / IDE device to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
USB 2.0 to IDE/SATA Cable can be easily connected to the IDE device / SATA device and make the hard disk device more portable. Also, it is easy to use and plug & play, no drivers needed..
Satisfaction Guarantee: We always want to offer striving hard to provide our customers with best shopping experience. If you are not satisfied for any reason, please do not hesitate to contact us. We will offer you a satisfactory solution. Thank you!.

Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive.
Connect your SATA / IDE device to your computer through a USB port.
Compatible Windows PC or Mac with Available USB 3.0 /2.0/1.1 Port.

Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive.
High performance USB 3.0 extension cable extends the connection between a computer or Windows tablet and both USB 3.0 and USB 2.0 peripherals including hard drives, USB hubs, mice, keyboards, flash drives, printers, and more.
Connect your SATA / IDE device to your computer through a USB port.
Upgrade to SuperSpeed USB 3.0 and future-proof your data transfer rate while maintain backwards compatibility with your existing USB 2.0 devices.