Reviews Usb 2 0 To Ide Adapter

CY Low Profile 4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard

4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard.
With 9.5mm Length low profile bracket and standard bracket. Interface: Interface: Single-Lane (x1) PCI Express Gen2 Mode.
You need to install the NEC USB3.0 driver for your computer first.Compatible: USB1.1/2.0/3.0.
Operating Systems: Windows7/8/10(32/64bit) ..
Speed: Data Transfer rate of 1.5/12/480/5000 Mbps.Low Speed (1.5Mbps), Full Speed (12Mbps), High Speed (480Mbps), Super Speed (5Gpbs).
Power Input: SATA or IDE Power Connector.

Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Compatible read up to three hard drives simultaneously!.
One Touch Backup (OTB) Function. Design for people who need to backup data from your computer to portable hard drive. (Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux).
Plug and Play, Hot- swappable, no driver needed. On/Off Switch design for HDD protection. Led light shows power and activity status..
Support 2 IDE and 1 SATA hard drives connecting simultaneously! Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive.
SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected.

Universal SATA/IDE Hard Drive Adapter: It can support 2.5 "/3.5" SATA I/II/III Hard Drive and 2.5'' SATA SSD.
Super Speed USB 3.0: USB 3.0 supports transfer rates of up to 5Gbps(The actual transmission speed is limited by the setting of the device....
Pulg & Play: Support Plug and play & hot swap, On/Off power Switch for Hard drives protection. Tips: Some IDE hard drive is old, you need to set....
System Compatibility: Support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux etc. Support devices PS4/Xbox/TV/monitoring equipment..
Customer Focus: Our goal is to give you a 100% satisfaction shopping experience, so we provide 18 months warranty.

Turn a 2.5” SATA III or IDE HDD / SSD into an external hard drive that connects to your computer through USB 3.0 with UASP.
Works with USB 3.0 computers such as Ultrabooks, Macbooks and desktop computers and 2.5in IDE or SATA HDDs & SSDs such as Samsung 840 EVO.
2.5" hard drive enclosure / SATA 2.5 hard drive enclosure.
IDE HDD or SSD enclosure / USB to IDE enclosure / 2.5 inch enclosure.
Turn an unused IDE or SATA drive into additional external storage.

Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.

Enables to operate up to IDE + SATA drives simultaneously and compatible with 2.5″/3.5″ SATA/IDE hard drives and SSD，Supports drives with a capacity of up to 3 TB.
Supports 5.25″ optical drives with SATA or IDE interface: CD/DVD-ROM, CD/DVD-RW, Blu-ray DVD, MO, zip and combo devices.
LED indicator shows power status and on/off switch ensures you an easy control of this device.
3 feet (0.9 meters) USB 2.0 cable, compatible windows PC or mac with available USB 3.0 /2.0/1.1 port and support data transfer rate up to 480mbps.
Ship next business day! 24 * 7 Email Support! Free Lifetime Technical Support and 24 Months Warranty from Cinolink..

Connect a CF card to a computer through an IDE connector.
Compatible with compact flash memory cards and desktop computers with an IDE slot.
Compact flash IDE adapter / CF to IDE adapter / CF to IDE converter / IDE to CF card reader.
Quick and driver free installation into any IDE 40 pin and 44 pin slot.

Wireless transmission: a W-i-f-i-SD card adapter, Only supports 2.4G network, make sure the adapter and PC/Mac terminal connecting to the Same Network. Please note:Comes with a 8G card( detail user guides) in the package, not for using.Install is a little complicated, please reference the more information and other customers voice..
Usage: Make sure have a CH340 USB driver(search: FYSETC/CH340-Driver on Github) and a Arduino IDE software/Pronterface (Pronterface forces all caps, not good if SSID/PW has lowercase). Please refer to the product description at bottom for more details. Note: *Adjust the baud rate to 115200*on Arduino..
Based on ESP8266's low-power UART-W-I-F-I chip module. About the firmware. please search Github:FYSETC/ESPWebDAV..
Features: Maximum support 32GB of SD card.
The adapter uses a DHCP connection, please map its address as static in your DHCP server. Has the ability to operate in 802.11 B/G/or N modes. It is set to the "N" mode by default. To change modes requires modifying the firmware and re-flashing the device using the free Arduino IDE software..
Suitable for 24V 3D printer, such as Prusa MK3S,TFT35 V3.0, Ender 3,SKR Mini E3 V1.2 V2 etc. Need more help please email us, we will give you help within 24 hours..

The Mega is 100% compatible with Arduino IDE and most of the shields are designed for the Arduino mega R3，RoHS Compliant.
The chip is Atmega + 2560-16au and 16u2, same with the official version..
Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin.
Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
It contains everything needed to support the microcontroller.
simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..