Reviews Unloader Valve

LF10-4H

95-125 psi factory preset regulated, you can regulate as you need between 35-150 psi.
¼" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1/4" PORTS.
Corrosion Resistant and Non Metallic Cover.

The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.

H/D PRESSURE SWITCH AIR COMPRESSOR 145-175 4 PORT 26 AMP w/ Gauge & Pop off valve 0-200 PSI Pressure Gauge 200 PSI Pop off valve.
efoo AIR COMPRESSOR CONTROL VALVE LF10A-H4,Four port, 145-175 PSI 26 AMP AMP RATING: 26 AMPS SINGLE PHASE OR THREE PHASE, 110/230.
Air Compressor Pressure Switches · For all global air compressor applications. · LF 10A Four Port Series (LF10A-L4) · UL Listed and CSA Certified. · DPST switch · Rated 26 Amps · Temp. range: -22° to 257°F.
Pressure Switch, Air Compressor, Standard Action, Factory On/Off Set 145-175 PSI, Pressure Range 35 to 150 PSI, Burst Pressure 500 PSI, Port Type 4-Port 1/4 In NPT (Female), 1/4" Compression Unloader, Diaphragm Actuation Type, Manual Switch Action Auto/ Off, Single Phase, DPST Contact Type, 26 Amps, NEMA 1 Enclosure, Temp Range -22 to 257 F, Standards UL/CSA.

Pressure Washer Manifold Kit 16031 190627GS 190574GS.
Kit Includes: Chemical Injector, Inlet Check Valve, 4 Mounting Bolts, and 4 Mounting O-Rings.
To fit model number 020228 -- Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold..
Excell Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like, you can remove the short one and install the longer one that is on the OEM manifold.
Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..

310924003 Unloader Valve Kit Fit for Many Coleman Powermate / Simpson Pressure Washer Pump.
Please confirm your old part number matches up with one of the part numbers above.

... & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".