Reviews Universal Steering Shaft Kit

JEGS Universal Floor Shift Tilt Steering Column | Black | 2” Tube | 30” Length | Includes 9-Hole GM Steering Wheel Adapter, Tilt, Turn Signal & Hazard Levers, and GM-Style Electrical Plug

  • UNIVERSAL DESIGN that can be made to fit most vehicles by modifying the wiring harness to the vehicle’s harness, mounting brackets, steering shaft, and steering wheel.
  • 30” COLUMN LENGTH IS MEASURED from the top of the bell to end of the output shaft.
  • INCLUDES (optional) 9-hole GM steering adapter, tilt, turn signal & hazard levers, and GM-style electrical plug.
  • BLACK FINISH for great looks and long life.
  • ACCEPTS ANY 1969-1994 GM steering wheel or adapter.
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock

Bestauto Outboard Steering System 10 Boat Steering Cable 10 Feet Marine Steering System 3/4 Shaft with 13.5 Inch Wheel for Yachts and Waterborne Vehicles

  • High-Performance Rotary Steering System: The VEVOR boat steering system kit is specially designed and developed for marine use. It comes with a 10 ft steering cable, a standard 3/4" tapered shaft, a swivel helmet, a 13.5" steering wheel, a 90-degree bezel kit, and hardware. Enables the vessel to steer accurately and improves work efficiency. Take control of your boat, and create waves all summer long..
  • 10 Feet Steering Cable: Our marine flat steering design allows for a firmer control that outshines the competition. And the steering cable meets the precise steering requirements of different types of rudders and cylinders. Please verify if the cable length matches your application..
  • Durable & Robust Rotary Helm: Characterized by its premium alloy material, the rotary helm is rust-proof and resistant to wear. Heavy-duty material ensures longevity and easy maintenance. Adjustable nuts are used to secure the rudder and wheels..
  • Quick Installation: With complete accessories, the marine steering kit is easy and quick to assemble as you don't have to configure the parts separately. Besides, a simple snap-in cable connection and different mounting hardware are provided to ensurefast installation. Get ready to set sail and conquer all waters..
Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
  • Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
  • Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
  • Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check Stock

Edelmann 8904 Pitman Shaft Seal

  • Edelmann Steering Gear Lower Pitman Shaft Seal Kits include all the necessary components to reseal your leaking steering gear, restoring full factory functionality.
  • Includes only top quality components that meet or exceed OE specifications.
  • Affordable alternative to replacing the steering gear.
  • Each kit features all the necessary O-rings, seals, gaskets, hardware, etc. required for each specific application.
Check Stock

MLKYCSKE Golf Cart Accessories Steering Column Rebuild 12 Kit fits Club Car DS Gas and Electric Models from 1987-Up, Replaces Part Number 1014216

  • Replaces OEM 1014216, this kit contains everything you'll need to totally rebuild the steering column to get rid of any looseness you might experience. Recommendation: try to use a combination of new and old parts to rebuild the steering system or replace all.
  • Kit contains: Includes 2 Steering Wedges (1014125), 2 Bearing Assemblies (1014213), 1 Steering Snap Ring (1012605), 2) Steering Bearing Seats (1014126), 1 Steering Shaft Seal (1014211), 1 Steering Column Spring (1014217), 1 Steering Retaining Ring (1014214), 1 Top Steering Tube Gasket (1012466), one (1014212) nylon spacer used only in 1987 from serial number A8719-117332 to A8751-135102.
  • Bearings need to be filled with grease before installation, Pay attention to the bearing installation direction. If it is not clear, mark it when disassembling. At the same time, there are installation instructions in the package.
  • MLKYCSKE product well-built: designed to meet or exceed original manufacturing specifications, all product items tested for reliability, durability and performance.
  • Provide you with satisfactory after-sales service, 1-year free warranty on the quality of mechanical parts.
Check Stock

Yaemarine Stainless Steel Boat Steering Wheel 5 Spoke 13-1/2\ Dia Destroyer Style Marine Wheel with M Size Knob & Black Plastic Center Cap(9103SRF1)

  • * Commonly used on most marine boats, vessels, yacht, pontoon boat and so on.
  • * Non-directional 3 spoke steering wheel.
  • * The wheel includes a cap to put in the center mounting hole once you have secured the wheel to the steering shaft..
  • * Universal fits standard 3/4" ( 19 mm ) tapered shaft.
Check Stock

Apeixoto Intermediate Steering Shaft Steering Columns Compatible with Chevy GMC Cadillac Hummer with OE Replace # 19329330, 88965505, 89060582, 19149105, 19153614

  • Fitments: This steering shaft is compatible with Cadillac Escalade ESV EXT.
  • GMC Yukon. Please make sure this is the correct for your vehicle before your purchase..
  • Replace OE #: The Apeixoto lower steering shaft is designed and manufactured with OE standard. The direct OE replace part numbers are 19329330.
  • Function: The Apeixoto steering shaft is a key part to connect steering shaft and the steering gear on your vehicle. A good and well made steering shaft will make the steering operation much more smoothly and give you a more convenient driving experience..
  • High Quality: The Apeixoto steering shaft is constructed with high quality material which gains a much longer lifespan..
  • Warranty: We offer 30 days free return and 365 days free replacement. If you need any assists, feel free to ask..
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock