Reviews Ul T8 Ballast

Sunlite 40199 LED T8 Ballast Bypass Light Tube (Type B) 8 ft, 43 Watt 59W Equivalent (F86T8 Replacement), 5500 Lumens R17D Base, Dual End Connection, Shatterproof UL Listed, 4000K Cool White, 10 Pack

  • ...s from Sunlite. They are instant on at full brightness with no buzzing or flickering. Glass outer tubes prevent yellowing and bending over time. Our wide 170° beam angle with shatterproof glass gives you great light coverage. High Color Rendering Index (CRI) rating of 82.
  • BALLAST BYPASS REQUIRED - These bulbs are direct replacements for 8 foot T8 R17D base fluorescent tubes. You must bypass the ballast in all fixtures before installing these bulbs. Simple instructions can be found online or consult an electrician for more information.
  • ENERGY EFFICIENT - With a life-span of up to 50,000 hours each bulb puts out a bright 5500 lumens of light with a 4000K Cool White color temperature while only using 43 watts of electricity. Annual energy costs are a low $5.18 (Based on 3 hours/day at $0.11/kWh).
  • DLC AND UL LISTED - These shatterproof led bulbs are UL Listed and have been tested to meet their rigorous safety standards, they are also DLC listed for quality and efficiency. Suitable for enclosed fixtures.
  • FOOD & RESTAURANT SAFE - This T8 bulb is covered with pet film which prev....
Check Stock

GE Lighting 78619 GE332MAX-H/ULTRA 120/277-Volt UltraMax Electronic Fluorescent T8 Multi-Volt Instant Start Ballast 3 or 2 F32T8 Lamps

  • Multi-volt Instant Start T8 Ballast will accept up to 3 or 2 F32T8 lamps.
  • Accommodates multi-voltages from 120 to 277-volts, extra versatile for your unique projects.
  • Cool operation casing is rated UL55C at 131-Degree Fahrenheit, suitable for high temperature applications.
  • UL Type CC Rating provides protection against arcing in electrical components.
  • Mounting dimensions: 9-Inch L x 0.9-Inch W, Mounting slot set 0.3-Inch apart.
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL - 5000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable.UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, UL - 4000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

Keystone Technologies KTEB-226-1-TP Electronic CFL Ballast

  • rogrammed Rapid Start T8 Ballast will accept up to 2 or 1 F32T8 lamps. Accommodates multi-voltages from 120 to 277-volts.
  • Runs quietly with most 120-volt applications, less than 10-Percent Total Harmonic Distortion.
  • Ballast factor rating of Low .77 for low power maximum savings, ballast factor rating controls light output and wattages of each lamp..
Check Stock

PARMIDA 24-Pack 4FT LED T8 Hybrid Type A+B Light Tube 18W Plug & Play or Ballast Bypass Single-Ended OR Double-Ended Connection 5000K 2200lm Frosted Cover T8 T10 T12 Shatterproof UL & DLC

  • ✔ INSTALL WITH OR WITHOUT A BALLAST. These Parmida tubes can be installed with a ballast (plug and play) or without a ballast (direct installation).....
  • ● SINGLE OR DOUBLE-ENDED CONNECTION. This tube is UL-Listed for installation with a single-ended or double-ended connection. Fast, simple and secure....
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your....
  • ● FULLY CERTIFIED: UL-LISTED & DLC-CERTIFIED. 5 YEAR UNLIMITED WARRANTY. This product meets strict requirements to be considered energy efficient,....
  • ● SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures,....
Check Stock

Four-Bros Lighting LED High Bay Light 6 Lamp 5000K Daylight White, 5 Year Warranty, Industrial Grade, Warehouse, Shop, Garage Lighting - UL Listed, DLC Approved, Made in USA, BAA Certified, Pack of 6

  • #1 Rated Made in USA LED High Bay. BAA Certified Fixture.
  • ✔ Single-sided 18-watt LED T8 tubes included with every LED High Bay purchase✔ MAINTENANCE-FREE - No ballast-drama anymore. This 6 Lamp LED high bay light fixtures operates (6) LED T8 tube lights that bypass the ballast. Simply install the LED tube in its marked location and twist. Our LED high bays must be wired to operate 6 LED T8 Tubes.
  • ✔ MAINTENANCE-FREE - No ballast-drama anymore. This 6 Lamp LED high bay light fixtures operates (6) LED T8 tube lights that bypass the ballast. Simply install the LED tube in its marked location and twist. Our LED high bays are rewired to operate 6 LED T8 Tubes17,160 Lumens (Brighter than Fluorescent T5HO) 5000K Daylight White Color Temp.
  • ✔ HOW DOES IT WORK - Each high bay Fixture comes with all the wiring and tombstones needed to be installed on the field. THESE DO NOT COME PREWIRED..
  • ✔ 5 YEAR WARRANTY - Buy with confidence, risk-free. Four Bros Lighting five-year warranty got you covered! Contact us for an easy and fast replacement..
Check Stock

The Axiom

  • ✔ Ballast Removal required : Remove the ballast before you install these T8 4ft led bulbs 2pin ends！.
  • ✔ SAVE 65% INSTANTLY - Save 65% on your electricity bill. Replace 80 Watt fluorescent tubes with 28 Watt LED Tube lights (Lighting output 2640 lumens) ..
  • ✔ HIGH BRIGHTNESS - Using imported high brightness LED as light source,Brightness is three times as the same power traditional light source.
  • ✔ EASY INSTALLATION - Can be installed on the traditional G13 4FT T8 lamp socket, bypass the starter and ballast before installation.This 4ft led bulb is double-ended connection. Fast, simple and secure installation..
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 5000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock