Reviews U Joint Puller Meritor

Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RB06)

  • (1) ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case..
  • (2) HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms..
  • (3) UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks..
  • (4) PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool..
Check Stock

Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (BS06)

  • 1 ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case..
  • 2 HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms..
  • 3 UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks..
  • 4 PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool..
Check Stock

Keyboard Lube Switch Puller Kits Key Cap Remover Tools Mechanical Switch Opener for Mechanical Keyboard Removing Fixing Cleaning

  • Package contents: you will receive 1 kit of keyboard lube switch puller kits, including 1 piece of wire key puller, 1 piece of simple U clip, 1 piece of IC chip puller, 1 piece of DIY drawing pen, 1 piece of wire shaft puller, 1 piece of groove cleaning brush with dustpan gap brush and 6 pieces of round key pullers.
  • The quantity is sufficient for you to use and replace, and can easily meet your daily use and other requirements.
  • Serviceable material: these key cap remover tools kits are made of quality steel wire and plastic, which are reliable, not easy to deform, tear and break, and can keep for a long time.
  • You can handle them easily and do things effectively, bringing you more convenience.
  • Wide applications: these mechanical switch openers kits are not only suitable for cleaning the different keyboards, but also can be applied for cleaning window tracks, corners, drawer door gaps, sliding doors, shower door tracks, which can save your time.
  • Size information: the wire key puller is approx. 4.53 x 0.67 x 0.51 inch, the simple U clip is approx. 4.13 x 1.3 x 0.4 inch, the IC chip puller is approx. 4.84 x 0.43 x 0.43 inch, the DIY drawing pen is approx. 6.5 x 0.08 x 0.08 inch, the wire shaft puller is approx. 4.92 x 0.79 x 0.28 inch, the groove cleaning b....
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

POPLOCK 17-inch Indexing Pry Bar Nail Puller/Adjustable Cats Paw Deck Wrecker / 11-Position/Pry Bars Nail Remover/Prybar/Trim Pullers for Baseboard/Nail Pulling/Floor Removal/Demolition

  • Indexing Pry Bar Nail Puller - Index Pry Bars Nail Puller with new head adjustable design. Flat sharpening edge prybar with opposite slide curved angle on Prying ends for carpenter fast wrecking.
  • Adjustable Cats Paw Deck Wrecker - Innovative Unique Adjustable Nail Puller PryBar Design with 2 sides push locking mechanism apply to Nail Puller wrecking bar. User use as cats claw extractor tool..
  • Indexable Pry Bar - Index Nail Puller Prybars with incremental angle 18 degrees allows user to choose up to 11 different angles for prying in difficult confined spaces and nail pulling..
  • Adjustable Nail Pulling Strength - Nail pulling torque exceeds US ANSI requirement (ASME B107.60-2004 ). Heavy duty gear design allow user to apply on deck wrecking , demolition , annihilator pry bars.
  • Nail Remover Extractor Pry Bar Tools Easy To Use - Extractores De Uñas Barra De Palanca, Hacer estallar las uñas en posiciones extrañas. hacer palanca en espacios confinados difíciles y tirar de clavos..
Check Stock

EWK Brake Caliper Press Tool Piston Spreader Pad 360 Degree Swing Ratchet

  • Made in the USA, Lang Tools (4651) Automatic Slack Adjuster Release Tool and Wrench is for use with automatic slack adjusters on Meritor systems. The....
  • For adjusting automatic slack adjusters on Meritor systems.
  • Release the anti-reverse mechanism without prying and apply more turning power with less fatigue to the hand.
Check Stock

LainKeen Inner CV Joint Puller Front Wheel Drive Axle Half Shaft Removal Tool Kit with Heavy Duty 10 Pounds Slide Hammer, 63mm 48mm CV Joint Fork Adapter Attachments

  • Remove CV Axle Easily: Using the CV joint puller, you can easily pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts..
  • Heavy Steel Slide Hammer: The slide hammer and the VC join fork is made of heavy duty steel, which can withstand huge pressure without deformation, is not easy to break. slide hammers are heavier and larger than normal ones, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, the length is 19.5 inches, so it can generate greater pulling force and work easier..
  • Efficient Slide Hammer: The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm are suitable for most veh....
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components.
  • Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break.
  • Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently.
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have....
Check Stock

uxcell A15091000ux0308 9mm U Tip Nail Staple Rivet Tack Puller Remover Screwdriver Tool

  • Shaft Size: 120 x 20mm/ 4.7" x 0.8"(L*W).
Check Stock