Reviews Turbocharger Oil Return Line Gasket

TMKOOL 4-Ply Reinforced High Temperature 3.5\ to 4\ ID 90 Degree Elbow Reducer Coupler Silicone Hose (BLACK, 3.5\-4\)

  • 4-Ply Reinforced High Temp Silicone Coupler and The hose material is high quality silicone, many color and size to choose.
  • Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. Bursting pressure: 2MPA.
  • 4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Great for marine and industrial use perfect use with Turbocharger, Supercharger, DIY Intake, radiator cooling system and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil.
  • Meet and exceed Saej20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications.
  • Inner Diameter: 1" (25mm). Leg Length: 4.5"x4.5". Wall Thickness: 5mm . We Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
Check Stock

667-203 55565353 Turbo Charger Turbocharger Kit Compatible with 2011-2020 Chevy Cruze Sonic Trax Buick Encore 16 Cruze Limited 1.4L 1.4T Engines 55565355

  • Replacement Turbocharger - The turbocharger helps the vehicle's engine to generate more power and obtain higher acceleration to the vehicle. It funnels the exhaust gases to spin the turbine wheel along with the compressor wheel at a high speed which feeds large amount of air to the combustion chamber than its normal intake of the vehicle's engine. This is applicable to your encore, cruze, sonic and trax vehicles..
  • Compatible with Buick and Chevy Vehicles with 1.4L, 1.4T Engines - 2013, 2014, 2015, 2016, 2017, 2018, 2019 Encore | 2011, 2012, 2013, 2014, 2015 Cruze | 2016 Cruze Limited | 2012-2019 Sonic | 2013-2019 Trax |. The turbocharger can easily be located in front of the exhaust manifold inside the engine bay. Printed installation instructions are included with the kit..
  • Replaces Part# 55565353, 667-203, 667 203, 40-80745S4, 25201063, 860156, 847-1446, 781504-5004S, 781504-5001S, 781504-0001, 781504-0002, 781504-0004, 7815040005, 7815040006, 7815040007, 7815045001S, 781504-5004, 14030485-101, 14030485-102, 14030485-103, MGT1446V, GT1446V, 667203 commonly found on popular Encore, Cruze, Cruze Limited, Sonic, Trax models including years 11, 12, 13, 14, 15, 16, 17, 18, 19..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a d....
Check Stock

HIHIAV 11127582245 11127552280 Valve Cover Gasket &Gasket Maker 3oz,Camshaft Adjuster Eccentric Shaft Actuator Seal Oil Filter Housing Gasket BMW 128i 323i 328i 328xi 528xi 528i X3 X5 Z4 3.0L

  • ...asket with two bags to make sure our customer receive our gasket completely..
  • 【100% Satisfaction Guarantee】--We cherish our brand,focus on quality and customer services,each piece has been checked before shipping in good condition,If it is impacted during shipping, pls return it for a full refund or a change order within 30 days.Tips:According to Amazon’s policy: if the cargo was damaged by customer and become unsaleable, customer will not get refund,so pls keep the label and package in good condition so that you can get refund successfully..
Check Stock

TMKOOL 4-Ply Reinforced High Temperature 3.75\ to 4\ ID Silicone Hose Reducer Coupler 3 Inch Length (BLACK, 3.75\-4\)

  • 4-Ply Reinforced High Temperature Silicone Coupler and The hose material is high quality silicone Reinforcement is stronger made with Silicone fluorine polyester.
  • Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. Bursting pressure: 2MPA.
  • 4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Perfect for use with Turbocharger, Supercharger, Intake, and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil.
  • Polyester layers to enable high temp and pressure than original rubber hose does .It is excellent resistance to Ultraviolet radiation, water, ozone and oxygen.
  • Inner Diameter: 3.25" (83mm). Length: 6'' (152mm). Wall Thickness: 5mm- LTI Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
Check Stock

Loctite 37394 Anaerobic Gasket Maker - 1.69 oz.

  • RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
  • FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area. Eliminates the need for preformed, paper, rubber & cork gaskets..
  • INCREASED OIL RESISTANCE. Tolerates contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids)..
  • IMMEDIATE CURING. Operating strength of 15 PSI within 1 minute of application. Equipment can return to service immediately!.
  • LOCTITE READY GASKET replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..
Check Stock

apel High Performance RTV High-Temp Silicone Gasket Maker and Sealant Heat Resistant from 104ºF to 572ºF Red, 10.2 oz.

  • RTV HIGH-TEMP SILICONE : Is a gasket maker and sealant, heat resistant RTV (Room Temperature Vulcanized) Silicone, used with sealing purposes in heating systems, automobiles, other vehicles especially in sealing and adhesion works of the motor components..
  • PHYSICAL STRAIN : High Temperature & Heat Resistant from 104ºF to 572ºF. It is resistant up to 482 ºF when exposed continuously and up to 572 ºF when exposed temporarily heat..
  • SUGGESTED APPLICATIONS: It can be easily used in sealing the stoves, applications where high heat resistance is required such as heating devices, pumps and motors, chimneys, hot water boilers, electric home appliances, rear main bearing cap split line, automatic transmission pan, case halves and inside cover, damper keyway sealing, differential cover, manifolds, oil pan corner seals, thermostat, transmission pan, valve cover gasket, water pump cover gasket, exhaust manifold & connection points..
  • PRODUCT FEATURES : It is cured acetoxy system and when cured formation of a flexible silicone gasket can be observed. Excellent bonding to wide range of applications, resists cracking, shrinking and migration caused by thermal cycling, resistance to oil, water & toxic chemicals, pressure resistant, makes air tight & leak proof ....
Check Stock

Turbo Diverter Valve 911-240 Turbo Turbocharger Cutoff Bypass Diverter Valve - Compatible With VW Golf Je-tta Passat Tiguan GTI Au-di A3 A4 A5 A6 TT 1.4T 1.8T

  • ✅【Package Includes】06H145710D Turbo Turbocharger Cut Off Bypass Diverter Valve.
  • ✅【Perfect Fit】The diverter valve is compatible with Audi A3 A4 TT VW Passat Eos CC Je-tta GLI Tiguan, replacement Part 911-240, 06H145710D, 06F145710B, 06F145710C, 06F145710G, 06F201282, 06F201282B, 06H145710C..
  • ✅【Solving Problems】06H145710D Turbo Turbocharger Diverter Valve will solve problems such as a loss of boost, extended lag, or sluggish throttle response.If the valve is defective or inadequate, these problems go away with the installation of a new diverter valve..
  • ✅【High-Quality】Brand new and high-quality turbocharger bypass diverter valve, a necessary replacement item for vehicles in states that comply with emission standards. Professional manufacture, high precision, and stable performance. Perfect match and a good choice for direct replacement of parts..
  • ✅【About Us:】Sikawai strives to maintain fairness and honesty with all customers and will make your satisfaction our top priority, including providing a 90-day return and exchange policy. If you have any questions during the shopping, welcome to contact us, We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
Check Stock

Butom Carburetor with Air Filter Ignition Coil Fuel Oil Line for Stihl MS250 MS230 MS210 025 023 021 Chainsaw

  • Package include 1 x carburator,1x fuel filter,1 x oil filter,1 x ignition coil,1 x air filter,1 x spark plug, 1 x fuel line, 1 x oil line,1 X gasket.
  • Fit Stihl MS250 MS230 MS210 025 023 021 chainsaw.
  • Warning: Air filter replace 1123 160 1650.
Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • ...in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
  • PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
  • We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ....
Check Stock