Reviews Tungsten Carbide Insert Boring Bar

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

1/2\ Lathe Threading Tool External/Internal Threading Holder SER 1212H11+ SNL 0008K11 Threading Holder with 11ER AG60 11IR AG60 Threading Inserts (SER1212H11+SNL0008K11+11ER AG60)

  • ♥Package includes ：1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench.
  • ♥3pcs Thredaing boring bars : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥3pcs 11IR A60 boring inserts : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm. Inserts are made of carbide and the coating material is TiN ,it Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥Package: The carbide inserts and turning tools holder are packed in plastic containers, safe and easy to store ..
  • ♥ If you need more 11IR A60, please search ASIN：B09496NZ3R.
Check Stock

Accusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108

  • 3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
  • Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
  • It is not necessary to remove tool from chuck or tool post.
  • Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
  • 1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • ...uck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
  • 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame contact is not easy to roll,1.15 pounds of solid aluminum bar handle to minimize the phenomenon of warping,the handle of the frosted sense of control more to let you handle any product details with ease..
  • 【LONG SERVICE LIFE】 - Weighing 1.15 pounds of solid aluminum bar handle,high-density tungsten carbide cutting head,high-sp....
Check Stock

ASZLBYM S06K/S07K/S08K/S10K/S12M-SCLCR06 Lathe Indexable Internal Boring Bar Set Lathe Turning Tools Holder Set with CCMT21.51/CCMT060204 Carbide Indexable Boring Turning Inserts + 5pcs T8 Wrench

  • ♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box..
  • ♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder..
  • ♥ 5PCS CCMT21.51 INDEXABLE INSERTS : inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron..
  • ♥ADVANTAGE : the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51/CCMT060204,you can search for ASIN: B09495PCR6.
Check Stock

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling

  • 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
  • Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
  • Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check Stock

Men's Tungsten Black Bar Pendant Necklace with 22 Inches Stainless Steel Snake Chain

  • 2 pcs tungsten steel bar pendant necklaces for couples and lovers, 1 silver bar necklace and 1 black one, friendship necklace for boys and girls, gorgeous pendant chain for people who like clean and simple design, Easter gifts for kids.
  • Material: tungsten carbide, tungsten steel is known for its super hardness & flawless quality, the hardness is about 4 times over titanium steel, great material for long lasting jewelry without any fading or scratches. The density is about 1.5 times over titanium steel, it makes the pendant having a good weight to it. Hypoallergenic and outstanding tarnish resistance. Tips: the super hardness of tungsten carbide pendant lead to impact toughness declining, so please avoid falling down and impact..
  • Pendant measurements: Height 1.7"(42mm), Width 0.2"(5.6mm), Thickness 0.2"(5.6mm), Weight 0.56oz(17g). Comes with 1.5mm x 22" snake chains.
  • Minimalist design, simple and clean, less but better, goes with almost any outfits by a chic dose of low-key gorgeous.
  • Package with MOO&LEE branded velvet gift pouch(2pcs). To share the couples necklace with your significant other for Birthday, Anniversary, Christmas, Valentine's Day, etc..
Check Stock

Eastwood 5 Pack 5-20 in. X 10 1/2 in. Window Liners Replacement Abrasive Media Blast Cabinet

  • Our Famous C-35 Series Power Gun with Long-Lasting 1/4" Tungsten Carbide Nozzle! Skat Blast Pro C-35-C Foot-Pedal Power Gun is "High-Velocity" and is designed especially for siphon blasting in all foot-pedal-operated Skat Blast Cabinets..
  • Includes our famous C-35 Series Power Gun with a durable medium 1/4" Tungsten Carbide Nozzle installed in the gun for long life. Carbide nozzle outlasts 30 ceramic nozzles. Plus, ergonomic handle for operator comfort..
  • Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life.
  • and has a case-hardened insert for better fit against back side of nozzle. If it's time to replace your foot-pedal gun in your cabinet, this is the one to buy!.
  • Has 1/4" standard female pipe thread air inlet at bottom of handle. Your hose from pickup tube slips on power head. Accepts 5/8" ID siphon hose. Complete with 1/4" medium Tungsten Carbide Nozzle and medium air jet installed in gun, 2 medium air jets, 1 air jet gasket, and allen wrench..
  • Max 125 psi. Requires 10-15 cfm, 5-7 HP. 7-3/4" wide, 6-1/2" high, 1" deep. Made in USA. Patent No. D760,571. FOR SIPHON BLASTING ONLY..
Check Stock