Reviews Tubing As Per Api

Woder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made

MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....

MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard.
REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners.
REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside.
ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents.
MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN.

Dispenses product from drums as well as both 5 and 7 gal. open-head and closed-head pails..
Constructed of polypropylene and polyethylene.
Delivers 8 ounces of liquid per stroke Threaded to fit a 2” drum opening.
Adapter is included to permit attachment of pump to flexible spout Cap included with a 3/4 Comes with 19-1/2.
Also included: 1-1/2" and a 3" split tube that may be used to limit the pump stroke and dispensing volume to 6, 4, 2 oz per stroke Cap included with a 3/4” thread Comes with 19 1/2 tubing.

Made from Pennzoil's patented gas-to-liquid PurePlus Technology combined with a high-performance additive system for complete protection.
Full synthetic 5W-30 motor oil tailored to meet the demanding requirements of modern diesel engines with particulate filters, as well as modern gasoline engines.
Helps keep pistons cleaner than required by the toughest industry standard.
Provides up to 1.7% better fuel economy based on ACEA M111 fuel economy results vs. the industry reference oil.
Helps protect loss of horsepower, and provides 40% better wear protection than required by API SN specification based on Sequence IVA wear test.
Meets or exceeds the toughest industry standards based on API SN and ACEA C3.
Meets or exceeds the requirements of the following industry specifications: General Motors dexos2 license GB2E1104014.

1.0 gallon per hour pressure-compensating emitter delivers same uniform flow rate from beginning to end of tubing runs.
Slow watering rate allows soil to absorb water more completely in the root zones of plants.
use with 1/4" Drip tubing or insert into 1/2" or larger Drip tubing.
Large water passages and self-flushing action help prevent clogging.
Constructed of highly durable UV and chemical-resistant materials to assure long life.

Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.

Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.

Slowly waters the soil around your plants for complete root zone hydration.
Ideal for short runs on flat surfaces, such as vegetable gardens, borders, and around small plants.
Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170 in..
connects to ½ in., 5/8 in., or 0.710 in. supply line with ¼ in. micro fitting such as a barbed connector or Clamp N Pierce Connector.
As part of a complete drip irrigation system, the soaker tubing seeps out water from the entire line, keeping soil moist.
Flexible tubing bends to accommodate curved irrigation areas as well as straight runs.
Porous non-pressure compensating material gently seeps water out of the entire line of tubing.
Comes with one 50 ft. coil of ¼ in. Soaker Tubing.
in cold climate areas, no need to winterize—the soaker tubing can be left in place or covered in soil or mulch, excess water will gradually seep out.

Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..