Reviews Tube Terminal

OIIKI 5 PCS HT-NTC 100K Temperature Thermistor 3D Printer Parts Sensor High Temperature +260 Degrees 2 Pins Thermistor for Reprap 3D Printer MK3 Extruder Heater Block

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

Ruiwaer 60pcs Nylon Insulated Flag Spade Quick Disconnects 90 Degree Electrical Crimp Terminals (20 x Red + 20 x Blue + 20 x Yellow)

  • Red, blue and yellow nylon fully insulated flag connectors (20pcs of each type, 60pcs in total)..
  • Blue: 16-14AWG, 15A, 1.5-2.5mm2, Yellow: 12-10AWG, 24A, 4-6mm2..
  • Material: insulating sleeve nylon tube material + brass end.
  • anti-aging, high temperature resistance, firm and safer wiring..
  • How to use: Remove the protective layer of the part of the wire that needs to be connected, insert the round head of the terminal to press it, and then insert the flat head into other positions that need to be connected, either soft or hard wire..
  • The high-quality flat wire crimping terminal can be disconnected conveniently, quickly and safely to prevent wiring failures. It is an ideal choice for automobiles, monitoring systems, elevators, industrial electronics, etc..
Check Stock

Bass Rockers 4 Gauge AWG Gold Plated Crimp Ring Terminals - Amplifier Car Audio Accessories - Power Ground Wire Battery Cable Connectors - TR4G 8pcs Red & Black

  • 4 GAUGE RING TERMINAL: 4 AWG wire has an ampacity of 85A and can carry up to 68 amps. The ring terminals are utilized in a conjunction with an electrical cable. The uncover cessation of an electrical cable is inserted into the tube of a ring terminal, after which it's crimped or soldered..
  • GOLD PLATED FINISH: Battery ring terminals are heavy-duty and have a gold plating surface for maximum conductivity. Gold ring terminals are well made with brazed seam craft, which keeps their durability, security, and beauty..
  • COLORED RUBBER BOOT: Insulated wire ring terminals come with red and black soft rubber boots, which will protect the battery cables with terminals and identify the polarity easily. Protect battery cables from corrosion, shorting and improve the appearance of your battery connections..
  • CABLE LUGS: A cable lug or connector is used when a permanent connection is required. This Ring terminal connector is well-liked because the stud and ring shapes work together to improve connection performance and lower the likelihood of unintended disconnections..
  • MULTI-PURPOSE: As it performs well in anti-shock and corrosion resistance, these crimp ring connectors are widely used in cars, batteries, audio systems power/ground wire, and so forth. It will effectivel....
Check Stock

Speaker Wire Pants(Y Boot) Cable Pants 12mm 2-Conductor (⌀12MM-2x 5.5MM, 8 Pack, Black) Dressing Up/Protecting/DIY Your Speaker Cables, DIN to RCA Cables

  • 【Cable Pants/ Speaker Wire Pants Dimension】Inner OD:12MM - 2x 5.5MM/ 0.472"- 2x 0.196", Recomend for Outer OD 10-12mm Cable For 12mm Terminal, Outer OD 3.5-5mm Cable For The 2 x5.5MM Terminal, CHEAK YOUR Cable Wire Outside OD, NOT AWG, AS AWG IS JUST THE CORE DIAMETER..
  • 【Apply】Perfectly Fits Speaker Wire and it can be also used in RCA cable..
  • 【Material】Made Of Premium Thick, Durable, Stable PVC,.
  • 【PLEASE NOTE】Cable Pants Can Not Use As Heat Shink Tube..
  • 【Operation】Easy to cut and shortened for quick and easy installation.
  • 【Package】Speaker Cable Pants only, other accessories in the photo are not included!.
Check Stock

1/0 Gauge to 4 Gauge Wire Reducer (2pairs) Car Audio Power/Ground Amp Input Reducer Adapter with AWG 1/0-3/8inch Battery Terminal Connectors and Heat Shrink Tube

  • 【Wire Reducer】2pcs 0-4 Gauge Wire Reducer. Made of Brass with Nickel Plated..
  • 【Ring Terminals】2pcs 1/0-3/8inch Ring Terminal. Made of Copper with Tinned..
  • 【Heat Shrink Tube】2pcs Heat Shrink Tube. Made of Polyolefin..
  • 【HIGH QUALITY】Made of High Quality & Durable Material. 100% Mechanically Tested Prior To Leaving The Factory..
  • 【WARRANTY】This Amp Input Reducer Adapter Kit comes complete with 2 years warranty. Worry-Free Return And Refund Policy, Buy with Confidence!.
Check Stock

ResMed AirMini DC Converter 38839

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
  • Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
  • ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
Check Stock

XmucTech 120 Pcs 10#, 22-16 16-14 12-10 AWG Heat Shrink Ring Wire Connector Terminals Kit, Electrical Connectors - - Automotive Marine Ring Connectors

  • You gey 120 pcs: 40pcs 16-14 AWG(Blue), 40pcs 22-16 AWG(Red), 40pcs 12-10 AWG(Yellow).
  • Suitable wire: 0.5-1.5mm²/22-16 AWG (Red), 1.5-2.5mm²/16-14 AWG (Blue), 4-6mm²/12-10 AWG (Yellew).
  • The ring terminal is made of high-quality pure copper to ensure maximum current and minimum resistance. The thick heat shrinkable tube ensures that your wires can be tightly connected, and the combination of the two ensures that your use is safe and convenient.
  • The heat-activated adhesive in the heat shrinkable tube can provide a good environment for preventing wire corrosion and waterproofing, which can be reduced to 1/3 of the original size, and the wires can be tightly combined.
  • Heat shrink connectors work for any electrical application including marine, auto, home, audio, and trailer wiring.
Check Stock

MENSI Propane Gas Fireplaces Fire Pits DIY Safety Replacement Part Pilot Burner Assembly for Propane Igniter Kit M8x1 Thermocoupler with OD 4mm Copper Tube Connection

  • Safety pilot kit with ignition 2.8*0.5mm Flat terminal for Igniter & thermocouple sensor M8*1 end thread for valve 900mm.
  • With stainess steel gas collecting box protect the flame to be extinguished and more efficient for ignition sparks.
  • Designed for Fireplaces & Fire pits for propane gas （compare the size before ordering）.
  • This can be a DIY gas appliance and easy install with necessary nuts, Each connection should be connected well so can work perfectly.
  • Attention: 900mm pilot gas tube included with M8X1 Olive Nuts for gas valve pilot port. 4mm diameter Copper tube.
Check Stock