Reviews Ttl Module

USB to TTL Adapter USB to Serial Converter for Development Projects - Featuring Genuine FTDI USB UART IC ‘FT232RL’

Built-in a new and original FTDI IC device ‘FT232RL’, which handles all the USB signalling and protocols. TTL levels of +5V and +3.3V adjustable....
Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND connections.
POW(power), RXD/TXD transceiver communication LED indicator....
Windows 8 and newer OS, Linux and Mac OS will install FTDI driver automatically, except Chrome OS. For details of OS compatibility and installation....
Typical applications: USB to RS232/RS422/RS485 converters, Support EEPROM, Vendor ID re-write, unbrick routers and Mprog3.5, interface to GPS modules,....
You will get: 1 x Moyina USB to TTL Module + 1 x Jumper + 10 x Dupont Cables (7.9”, female to female), which are packed by antistatic bag. We offer....

Received great ideas from our customers and adopted in this upgraded kit. Removed useless modules heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc..
Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+, Complete Update and common models for Mega 2560 starter kit..
Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
Upgraded tutorial only for R3, for MEGA2560 R3, for NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. or download the tutorials online from the official website..
100% compatible with Arduino official IDE, Raspberry Pi and STM32..

LOW VOLTAGE APPLICATIONS -- The input common mode range is better than the swing input, which is very suitable for low voltage applications..
APPLICATION -- Digital module can be used for wide voltage range and periodic signal shaping..
FRONT END ADJUSTMENT -- Used as a front end conditioning module in time domain measurements for frequency and phase difference..
PARAMETER -- The input voltage is 10 to 1000mV, the input frequency is about 200MHz DC, and the input impedance is 50 ohms..
RAIL TO RAIL OUTPUT -- The output level mode is rail to rail output, which can directly drive TTL / CMOS level..

Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.

Output TTL level can be detected with the microcontroller. The power supply can be 3-5V.
the PLC input terminal of the PLC COM power supply 24V input termination of the board signal output OUT, optocoupler board GND power negative.
When the power module in the power of the board after the white wire frame can not touch any device .. because it is high voltage. Note the safety of electricity.

【Control Devices】The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current..
【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA..
【Fault-tolerant Design】The relay will not operate even if the control line is disconnected..
【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc).

Programmable Control -- This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run Input high speed pulse C235, C251 and FX1N compatible.Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc..
Built-in Analog Input and Output -- Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030) Built-in Analog output DA, corresponding to internal data register D5101..
The PLC with Two Programming Port -- The TTL interface and the 232 interface. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. When the PLC need to connect with the touch screen or text, can be used to conne....