Reviews Tripod Head For Slider

MULIOCEAN Camera Slider Support Arm 2 Arms in Tripod Stability Arm/Rods for Increasing Stability in Aluminum Alloy Extendable Poles for Camera Slider Rail Track with C Clamps and Ballhead

  • 【 A really neat addition to any videographer’s kit】 These two tripod stability poles allow increased stability when using a slider on a single....
  • 【 Extendable Slider Support Rods】 The slider stability arms can be adjusted from 23” to 39.4 ( 58.5 cm to 100 cm ), fitting sliders of all....
  • 【 Easy on the go】 One tripod and a pair of stability arms function as two tripods for outdoor filming. They’re also small enough to fit into a....
  • 【High Compatibility】 It attaches to the tripod with the c clamp and fits most tripods. 2.1”(5.5cm) max open of the jaw for both slim and thick....
  • 【Quick installation】 With two mini size pan tilts on both ends, the arms can be easily installed at any angle. Time saving..
Check Stock

Neewer Professional 35MM Low-Profile Ball Head 360 Degree Rotatable Tripod Head with 1/4 inch QR Plate Bubble Level for DSLR Cameras Tripods Monopods, Max Load 26lbs/12kg

  • 003cp003eHIGH STABILITY: 35mm low-profile ball head design creates stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability.
  • 003cp003eWIDE COMPATIBILITY: Equipped with 1/4 screw, the removable QR plate is suitable for all SLR cameras. 3/8 screw hole at the bottom can be attached to tripod, monopod, slider and other stands.
  • 003cp003eFREE ROTATION BALL HEAD: Upgraded design with 360 Degree Panoramic Base with 2 twist locks which can set your camera at different angle easily and quickly tighten or loosen the ball.
  • 003cp003eSMALL AND PRRTABLE: Height only 76mm/ 3inches, Weight only 282g/ 0.62lbs, easy to carry.
  • 003cp003eSTURDY AND DURABLE: Max Load up to 12 kg/26lbs, made of aluminium alloy material, it is very strong and durable.
  • Note: Camera and tripod are not included.
Check Stock

Low Profile Tripod Ball Head-INNOREL N52,Panoramic CNC Metal Camera Tripod Ball Head with Two 1/4 Screw Arca Swiss Quick Release Plates for Tripod,Monopod,DSLR,Camcorder,Max Load 66lbs/30kg

  • 【EXCELLENT QUALITY】Adopting all-metal structure, 0.1MM machining tolerance, anodic anodized and ultra-high-strength aviation aluminum alloy,it can load 66 lb/30kg but weights 1.17 lb/0.53kg only!.
  • 【STABLE LOW PROFILE】The ball head is designed with a low center of gravity, CNC machining and 52mm/2.05in large ball diameter, making it extremely stable. Its security slot protects your camera at all times..
  • 【WIDE APPLICATION】You can use this ball head with tripod, monopod,camera slider or mini tripod,for installing camera, DV, mobile phone, telescope. (Gifts:Extra Quick Release Plate).
  • 【PRECISION ADJUSTMENT】There are 4 * 90 degrees, 5 degrees per scale, and double spirit bubbles to meet the needs of accurate photography and Panoramic photography..
  • 【PACKING & GUARANTEE】There is a ball head,two quick release plate and a ball head bag in the package and we promise a 2-year warranty for this good..
Check Stock

Soonpho Q-08S Heavy Duty Video Camera Tripod Fluid Drag Pan Head with Extended Handle for DSLR Camera,Camcorders,1/4 & 3/8 inch Screw Sliding Plate 360 Degree Rotating Tripod Head

  • ➤TRIPOD FLUID HEAD - Made of high quality Aluminum Alloy,newest design of fluid drag pan head with precise craftwork,durable and tough,provide high-end solutions for photographers..
  • ➤EXTENDED HANDLE - This Tripod Pan Head with upgraded handle which covered by non-skid handle bar,convenient to turn the ball head with extended handle,ideal for both indoor & outdoor professional shooting,allowing quick level ajustment and precise shooting!.
  • ➤360 DEGREE SWIVEL - Equipped with 3 knobs for horizontal, vertical, and side adjustment,360 degree horizontally and -70 to 90 degree vertically,support panoramic shoots,providing a wide range of shooting horizens..
  • ➤1/4" & 3/8" SCREW - Platform with 1/4" screw thread and 3/8" screw hole at the bottom.High quality and exquisite workmenship,3/8" bottom screw compatible with most Tripods, Monopod,Camera Slider or Stands,1/4 inch quick shoe plate is for most DSLR cameras and camcorders,easy to install and take down..
  • ➤EASY AND PRECISE CONTROL: Accurate Scale and Rigorous Structural give you precise and easy control over each plane of movement that your camera move through.
  • Achieve better effect at shooting or video recording..
Check Stock

NEEWER Professional 28mm Low Profile Tripod Ball Head 360° Panoramic Rotating & 2 Lock knobs 1/4 Arca Type QR Plate and Bubble Level for DSLR Camera Tripod Monopod Slider Max Load 11lb/5kg

  • HIGH STABILITY: 28mm low profile ball head design creates stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability.
  • FREE ROTATION BALL HEAD: Upgraded design with 360 Degree Panoramic Base with 2 twist locks which can set your camera at different angle easily and quickly tighten or loosen the ball.
  • WIDE COMPATIBILITY: Equipped with 1/4 screw, the removable Arca type QR plate is suitable for most DSLR cameras and camcorders. 3/8" screw hole at the bottom can be attached to tripod, monopod, slider and other stands.
  • SMALL AND PORTABLE: Height only 70mm/ 2.76inches, Weight only 200g/0.44lbs, easy to carry.
  • STURDY AND DURABLE: Max Load up to 11lb/5kg, made of aluminium alloy material, it is very strong and durable.
  • Note: Camera and tripod are not included.
Check Stock

NEEWER Tripod Ball Head 360° Panoramic All Metal with Arca Type Quick Release Plate 1/4 Screw 3/8 Thread Mount Max Load 17.6lb/8kg Tripod Head for Monopod Slider DSLR Camera Camcorder Red

  • 360 Degree Swivel: Equipped with 3 knobs for adjustment, you are able to set your camera at different angle.
  • You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing.
  • Easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of position.
  • With Fine Tuning Damping to protect your device from sudden plunge while doing versatile angle shooting.
  • The base with index marking to indicate more precise control. Note: Tripod head Only.
Check Stock

Neewer Motorized Camera Slider, 39.4”/100cm Carbon Fiber Dolly Rail Slider with Remote Controller,Support Video Mode,Time-Lapse Photography, Horizontal,Tracking and 120° Panoramic Shooting (VS-100CC)

  • ...ber and aluminum alloy, the camera slider is lightweight and easy to carry for outdoor photography and videography. 4 roller bearings with balanced operation are stabler and anti-shake to ensure sharp videos and clear photos. The bottom and sides of the slider have 1/4” and 3/8” threaded holes for mounting on a tripod.
  • 【Camera Slider Kit】 This kit includes a motorized camera slider, a remote control, a RJ45 Data Cable, an NP-F550 replacement battery, a USB battery charger, a ball head, a hex key, a screw, and six shutter release cables (C1, C3, N1, N3, S1, S2). Compatible with most camcorders and miniature cameras, such as Canon, Nikon, Sony, Panasonic, Samsung, and Pentax cameras. Other camera models require an additional shutter release cable (not included).
Check Stock

Neewer Pro Metal Tripod Ball Head 360 Degree Rotating Panoramic with 1/4 inch Quick Shoe Plate, Bubble Level for Tripod,Monopod,Slider,DSLR Camera Camcorder up to 17.6 pounds/8 kilograms (Black+Blue)

  • SOLID CONSTRUCTION: Made of metal with solid construction, it is durable and tough enough.
  • 360 DEGREE ROTATION BASE: With 1 Panning knob and 2 locking knob, they can set your camera at different angle.
  • With band scale, the locks can be controlled more accurately and achieve quick location shooting.
  • FINE TUNING DAMPING: Protect your device from sudden plunge while doing versatile angle shooting.
  • MORE FLEXIBILITY: 3/8 inch screw thread hole is for connecting tripod, monopod, slider and other stands.
  • 1/4 inch quick shoe plate is for most DSLR cameras and camcorders.
  • Note: Tripod Ball Head ONLY. Camera and Tripod are not included.
Check Stock

Neewer 39.4”/100cm Motorized Camera Slider, 2.4G Wireless Control Carbon Fiber Dolly Rail Slider, Support Video Mode, Time-Lapse Photography, Horizontal,Tracking and 120° Panoramic Shooting (VS-100WC)

  • ...ber and aluminum alloy, the camera slider is lightweight and easy to carry for outdoor photography and videography. 4 roller bearings with balanced operation are stabler and anti-shake to ensure sharp videos and clear photos. The bottom and sides of the slider have 1/4” and 3/8” threaded holes for mounting on a tripod.
  • 【Camera Slider Kit】 This kit includes a motorized camera slider, a 2.4G Wireless remote control, One NP-F550 replacement batteries, a USB battery charger, a ball head, a hex key, a screw, and six shutter release cables (C1, C3, N1, N3, S1, S2). Compatible with most camcorders and miniature cameras, such as Canon, Nikon, Sony, Panasonic, Samsung, and Pentax cameras. Other camera models require an additional shutter release cable (not included).
Check Stock