Reviews Traxxas 2s Lipo Battery

XT30 XT60 Balance Board RC Lipo Battery Parallel Charging Board,2 in 1 PG Parallel Charging Plate XT30 XT60 Plug Supports 4 Packs for 2S-6S Lipo Battery

  • 2 in 1 lipo battery parallel charging board lipo charger,supporting XT60 connector and XT30 conector lipo battery.It is just a parallel charging board, not a diret charger, need to connect with a charger which support the balance port ( JST connector).
  • Thicken PCB copper foil, allow security using 35A charging current..
  • This lipo balance charging board supports up to four packs of the same type, same cells 2S-6S lipo battery pack,such as 2S lipo battery,3S lipo battery ,4S lipo battery,5S lipo battery,6S lipo battery..
  • Equipped with 40A fuse between any two groups of batteries, to prevent line burned due to the large battery pressure.
  • Output Connector:XT30 connector /XT60 connector,support xt30 and xt60 lipo batteries..
Check Stock

Gens Ace 2S Lipo Battery Redline Series 6000mAh 7.6V 130C 2S2P HardCase HV Shorty Lipo Battery

  • Gens Ace 7.6V 5500mAh Lipo battery Specification：Battery Voltage：7.6V；Configuration：2S2P；Capacity：5500mAh；Discharge：100C；Plug: Deans Plug..
  • Dimensions: Gens Ace 5500mAh 2S Lipo battery dimensions is: 96*47*26mm/3.78*1.85*1.02inch(L*W*H).
  • High Performance: Gens Ace 2S 5500mAh Lipo battery with 100C discharge rate hardcase offers high power and very long time for your RC Model..
  • Application: Gens Ace 2S 5500mAh Lipo battery specially compatible with XRAY XB4/XT2/X1, TLR 22, Serpent Spyder/F110/S110/SDX4, Team Associated B6/F6, RC10SC5M, RC10T5M Team Kit.
  • What you get: The Gens Ace battery comes with a 60 days money back and a 18 months warranty and with 24 hours friendly customer service. Please enter “YOU ORDER” to contact us directly if you have any problems with our product..
Check Stock

Zeee Premium Series 2S Lipo Battery 5200mAh 7.4V 120C Hard Case Batteries with Deans Plug for 1/8 1/10 RC Vehicles Car Trucks Airplane Boats(2 Pack)

  • 【Zeee Premium Series Specification】- Battery voltage: 7.4V.
  • 【2S Lipos Dimensions】- Zeee 5200mAh 2S lipo dimension is: 138*47*25mm/5.43*1.85*0.98inch(L*W*H).
  • 【2S Battery Application】 – Zeee 2S 5200mAh Lipo battery specially designed for 1/8 and 1/10 rc car such as Losi, Slash, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin, Redcat Racing, Exceed RC, ElectrixRC, Emaxx, Bandit, Rustler version(Only if the voltage, dimension and the plug match, then it will fit)..
  • 【Safety Warning】- 1. Users must read safety manual before use of the battery.
  • 2. You must use Lithium Polymer(LiPo) specific charger only.
  • 【What you get】- 2 Pack of Zeee 7.4V 120C 5200mAh 2S Lipo Battery Hard case with Dean-Style T Connector. Any product problems, please Contact US: 1. Enter into “Your Orders” to click “Contact Seller” option.
  • 2. Click “Ask a question” on our storefront. We will get back to you within 24 hours..
Check Stock

Zeee 7.4V Lipo Battery 2S 50C 5200mAh Lipos Hard Case with Dean-Style T Connector for RC Car Trucks 1/8 1/10 RC Vehicles(2 Packs)

  • 【Zeee 7.4V 5200mAh Lipo Specification】- Battery Voltage: 7.4V.
  • 【Dimensions】- Zeee 5200mAh 2S lipo dimension is: 138*47*25mm/5.43*1.85*0.98inch.
  • 【Application】 – Zeee 2S 5200mAh Lipo battery specially compatible with 1/8 and 1/10 rc car, Losi, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin, Redcat Racing, Exceed RC, ElectrixRC, Emaxx, Bandit, Rustler version (Only if the voltage, dimension and the plug match, then it will fit)..
  • 【High Performance】- Zeee 2S lipo battery with 50C discharge rate hardcase offers high power and very long run time for your RC cars. They are widely fit the 1/8 and 1/10 RC car models..
  • 【What you get】- 2 Pack of Zeee 7.4V 50C 5200mAh 2S Lipo Battery Hard case with Dean-Style T Connector. Any product problems, please Contact US: 1. Enter into “Your Orders” to click “Contact Seller” option.
  • 2. Click “Ask a question” on our storefront. We will get back to you within 24 hours..
Check Stock

CNHL Racing Series 6600MAH 7.4V 100C 2S Lipo Battery Hard Case with Deans Plug and TRX Connector for RC Evader BX Car RC Truck RC Truggy RC Heli Airplane Drone FPV Racing（2 Packs）

  • 【CNHL 7.4V 6600mAh 2s Lipo Specification】- Material: Lithium polymer.
  • 【High Performance】- CNHL 2S lipo battery with 100C(Burst 200C) discharge rate hardcase offers you very high power and very long run time for your....
  • 【Application】 - CNHL 6600mah 2s Lipo battery specially designed for 1/10 scale and 1/8 scale RC car hobby models such as: Slash, Emaxx, Bandit,....
  • 【Voltage Note】- Please check whether the battery surface is alright when you get it and whether the voltage is between 3.7~4.2V before using..
  • 【What you get】-CNHL 7.4V 100C 6600mAh 2S Lipo Battery with 4.0 Bullet-Dean Plug. （Warning: This product is only suitable for adults over 18....
Check Stock

Traxxas 2890X 6700 mAh 14.8V 4-Cell 25C LiPo Battery Vehicle

  • Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential.
  • Balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and the need for external balance boards.
  • Power Cell LiPos are constructed of premium cells with extra-wide discharge tabs to minimize resistance.
  • Power Cell LiPo packs feature patented High Current Connectors with 12-gauge Maxx Cable wire soldered directly to the LiPo cells.
Check Stock

Zeee 2S Lipo Battery 2200mAh 7.4V 120C Soft Case Battery with XT60 Plug RC Lipo for FPV Drone Quadcopter Helicopter Airplane RC Boat RC Car RC Models(2 Pack)

  • 【2S Lipo Specification】- Battery voltage: 7.4V.
  • 【2200mAh Battery Dimension】- Zeee 2S 2200mAh lipo battery dimensions(±2mm): 102*34*16.8mm/4.02*1.34*0.66inch(L*W*H).
  • 【Application】-Zeee 2S 2200mAh 120C lipo battery compatible with Glider, 3D plane, park flyers, Vortex rc helicopter, plane, airplane, FPV(Only if the voltage, dimension and the plug match, then it will fit)..
  • 【Safety Warning】- 1. Users must read safety manual before use of the battery.
  • 2. You must use Lithium Polymer(LiPo) specific charger only.
  • 【What You Get】- 2 Pack of Zeee 7.4V 120C 2200mAh lipo battery soft case with XT60 connector. Any product problems, please Contact US: 1. Enter into "Your Orders" to click "Contact Seller" option.
  • 2. Click "Ask a question" on our storefront. We will get back to you within 24 hours..
Check Stock

Zeee 2S 5200mAh 7.4V 50C Lipo Battery Hard Case Lipos with EC5 Plug for 1/8 1/10 RC Vehicles Car Slash RC Buggy Truggy RC Hobby(2 Pack)

  • 【Zeee 2S 5200mAh Lipos Specification】- Battery voltage: 7.4V.
  • 【Dimensions】- Zeee 5200mAh 2S lipo dimension is: 138*47*25mm/5.43*1.85*0.98inch.
  • 【Application】 – Zeee 2S 5200mAh Lipo battery compatible with 1/8 and 1/10 rc car, Losi, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin, Redcat Racing, Exceed RC, ElectrixRC, Bandit, Rustler version(Only if the voltage, dimension and the plug match, then it will fit)..
  • 【High Performance】- Zeee 2S lipo battery with 50C discharge rate hardcase offers you very high power and very long run time for your RC cars. They are widely fit the 1/8 and 1/10 RC car model..
  • 【What you get】- 2 Pack of Zeee 7.4V 50C 5200mAh 2S Lipo Battery hard case with EC5 Connector. Please enter “YOUR ORDER” to contact us directly if you have any problems, we will reply you within 24 hours..
Check Stock

Padarsey 5 Pairs (10pcs) Compatible for TRX Plugs Lipo/NiMh Brushless ESC Battery RC Connector

  • Traxxas 2994 - Power Cell 3S 11.1V Lipo Battery / iD Charger Completer Pack,.
  • Features: Battery: 4000mA 11.1v 3-Cell ID Charger: Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy sup.
  • Includes: (1) iD Charger #2970 (1) 4000mAh 11.1v 3-Cell 25C Lipo Battery #2849X.
  • Specs: iD Charger Specs: AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (40W Max.) Discharge Current Range: 500mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 365g Dimensions: 146 x 123 x 53mm.
  • Part number(s) included (in factory packaging): 2994.
Check Stock