Reviews Travel sized Feeler Gauge

uxcell 0.02 to 1mm Thickness Gap Metric Filler Feeler Gauge 6 Long

  • Total Size : 155 x 15 x 7mm / 6" x 0.6" x 0.28" (L*W*T).
  • Thickness (mm) : 0.02, 0.03, 0.04, 0.05,0.06, 0.07, 0.08, 0.09, 0.10,0.15, 0.20, 0.25, 0.30, 0.40, 0.5, 0.75, 1.00.
Check Stock

StewMac String Action Gauge And Ruler Metric Stainless Steel - Designed by StewMac The Original measuring tool for acoustic and electric guitar and bass setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt....
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common....
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure....
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20....
Check Stock

Engine Timing Light with Feeler Gauge 32 Blades,Inductive Timing Light Gun Timing Light Ignition Testers Engine Ignition Coil Tester for Car Motor Vehicle Motorcycle Marine Lawnmower Measuring Gap

  • ...ength Cables Easy Connect To Car's Engine Bay★ - Sensor Clips Cable length up to 4.41ft .Never worry about the length of the cable is not long enough.Adapts to all kinds of 12V battery for automobiles, motorcycles, ATVs, personal watercraft, RVs, boats, airplanes, golf carts, lawn mower, etc ..
  • ★ Stainless Steel Feeler Gauge As Bonus★ - Use feeler gauge to measure gap.This is flexible easy to get into all places. Blades are able to be together or can unscrew finger nut to take feeler out. 2 Different units of measuring: Dual marked metric and imperial, 0.0015 in/ 0.04 mm to 0.035 in/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification.Perfect for setting lifter, sparking plug, points gap etc. With anti-rust oil on feeler gauge to prevent rust..
Check Stock

Stainless Steel Feeler Gauge Universal Standard SAE and Metric Offset Valve Thickness Gauge 32-Piece Blade Tool for Measuring Gap Width/Thickness

  • 【EASY TO USE AND CONVENIENT】Made of high quality stainless steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable, easy and convenient to take and store. Easily measure gap widths with the ABN Valve Offset Feeler Gauge. It is great for use on guitars, engines, and so much more. Includes metric and inch sizes etched on each blade..
  • 【BUILT TO LAST】Constructed from hardened tempered steel with a lube oil coating to prevent pitting and corrosion.
  • Each blade has sizes laser etched for easy identification.
  • Blades are bound within a blade protector to prevent loss of individual blades.
  • 【EASY IDENTIFICATION】 dual marked metric and imperial, 0.0008 inch/ 0.02 mm to 0.040 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • 【METRIC SIZES (mm)】0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 1.00 mm.
  • 【INCH SIZES(inch)】0.0008, 0.0012, 0.0015, 0.002, 0.0025, 0.0028, 0.003, 0.0036, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.015, 0.016, 0.018, 0.020, 0.022, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.034, 0.036, 0.040 Inches.
Check Stock

Glarks 2 Pack Stainless Steel Feeler Gauge Set, 32 Blades 0.04-0.88 mm Dual Marked Metric and Imperial Gap Measuring Tool and 16 Blades Standard SAE and Metric Gap Width/Thickness Measuring Tool

  • ★【What You Get】: In this feeler gauge set, it include 32 blades dual marked metric and imperial gap measuring tool, 16 blades standard SAE and metric feeler gauge, they are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the feeler gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: 32pcs metric and imperial tool measuring range is 0.0015 Inch (0.04mm) to 0.035 Inch (0.88 mm), 16pcs standard SAE and metric feeler gauge measuring range is 0.0015 Inch 0.005 Inch(0.127) to 0.020 Inch ( 0.508 mm)..
  • ★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the blades, tools are contains a blade notch for easy blade removal, numbers are stamped clear for read..
  • ★【Wide Application】: They measure accurately and have almost no errors, will help you quickly and easily measure gap width/thickness. Suitable for designers, engineers, mechanics to measure the tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps, guitars gaps, engines ....
Check Stock

Rannb Plastic Feeler Gauge 0.05mm to 2mm Metric Gap Measuring Tool 20 Leaf

  • ⭐ Package Content - 1pcs x Feeler Gauge.
  • ⭐ Used for measuring of slot width, gap hole and etc..
  • ⭐ Each Leaf Size: 94mm/3.7" x 23mm/0.9" (Max.L x Max.W).
  • ⭐ Made of durable plastic.It is light weight and be easily carried in your pocket..
  • ⭐Metric sizes (mm): the 20 leaves feeler gauge owns 0.05mm/0.1mm/0.15mm/0.125mm//0.2mm/0.25mm/0.3mm/0.35mm/0.4mm/0.5mm/0.6mm/0.7mm/0.8mm/0.9mm/1mm/1.1mm/1.4mm/1.5mm/2.0mm.
Check Stock

Edward Tools Harden 32 Piece Feeler Gauge Set - Metric/Inch - (0.04-0.88 mm) - Thickness Gauge Measuring Tool for Spark Plug, Guitar, 3 D Printing - Metal Shims - Easy Read Numbers (1)

  • Easy to read gap measurements includes mm and Inch sizes.
  • Feeler Size for mm 0.04,0.05,0.06,0.08,0.10,0.13,0.15,0.18,0.20,0.23,0.25,0.28,0.30,0.33,0.35,0.38,0.40,0.43,0.45, 0.48,0.50,0.53,0.55,0.58,0.60,0.63,0.65,0.70,0.75,0.80,0.88+0.25mm Copper Sheet.
  • Feeler Size for Inches - 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • Multi use gap measuring tool - Works as spark plug measuring tool, guitar gap tool, metal shims, 3 D printing thickness gauge.
  • Lifetime Warranty - We guarantee this tool for life. Note - this feeler gauge comes with anti rust oil that may get on your fingers when first measuring.
Check Stock

15 Pieces Guitar Luthier Tools Set Including Guitar Radius Gauge, String Action Ruler Gauge, 32 Blades Feeler Gauge, Guitar Notched Radius Gauges for Guitar and Bass Setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt your hands, durable for long-term use.
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common distance measuring tool for guitar spacing , the chrome plated main shaft makes it easy to clean up.
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure string height, bridge saddle height, saddle slot depth, pickup polepiece height, fret slot depth and nut height.
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20 inch radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off.
Check Stock

Qagea Universal Spark Plug Gap Tool with Feeler Gauge Compatible with Most 10mm 12mm 14mm 16mm Spark Plugs

  • 【Precision】Universal 10mm 12mm 14mm 16mm spark plugs. Use a feeler gauge of the desired size to put in between the gaps. Then clamp the product with the product and release it to get the required gap.
  • 【Package】1 spark plug gap tool + 1 feeler gauge.
  • 【NOTE】Some spark plug electrodes will bounce back - this is normal for some spark plugs. If your clearance target is 0.39mm, we recommend 0.37mm so when it springs back you get 0.39mm..
  • 【Quality】The spark plug gap tool is manufactured by an ISO-certified manufacturer, we have very strict requirements on quality. 100% factory tested, and durable..
  • 【Warranty】2 years warranty for the spark plug gap tool! If you have any questions and needs, you can always contact Qagea by email, we will be happy to solve the problem for you..
Check Stock