Reviews Transmission Fluid Extractor

OEMTOOLS 25443 Extraction and Filling Pump, Brake Fluid Vacuum Pump Tool for Power Steering and Brake Fluid Reservoir, Garage & Shop Fluid Evacuators

  • SIMPLE BRAKE FLUID EXTRACTOR: Leave the turkey baster in the kitchen and easily extract automotive fluid in moments.
  • The plunger seal draws fluid out of the reservoir smoothly, eliminating messes with one manual fluid transfer pump.
  • FULL DISCLOSURE: Dual scale molded into the body of the fluid evacuator to measure liquid in quarts and milliliters.
  • Clear durable plastic body makes it easy to see how much fluid the syringe extractor collects as well as quality and condition.
  • LOW MAINTENANCE: The body of the fluid transfer pump disassembles into its components, making it easy to clean the cylinder, change the gaskets on the plunger, or otherwise service your fluid pump automotive tool.
  • REACH ANY RESERVOIR: Fluid evacuator pump comes with two connecting tubes that can extend the length of the brake fluid extractor pump from 11” all the way to 26”, so you can access any hard-to-reach filler neck or reservoir.
  • PRODUCT DETAILS: Maximum fluid extractor automotive capacity reaches 200 mL.
  • Includes (2) 7.5” car fluid pump extension tubes with cap locks.
Check Stock

Fluid Extractor 200CC Oil Pump Automotive Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer Oil Extractor 7Oz

  • [LONG SERVICE LIFE] VICRING Oil Extractor syringe is made of high-quality plastic materials, with 200cc capacity, strong and durable, high strength, and long service life..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [USE WITH VARIETY FLUIDS] VICRING oil fluid extractor is suitable for power steering, coolant, oil changes, rear axle rear grease changes, and even for transferring high-viscosity fluid. Also for use with durable, oil and chemical-resistant oils, coolants, and hydraulic systems..
  • [WIDE APPLICATION] Great for extracting or changing engine oils or lubricants in boats, farm equipment, industrial gear boxes, motor bikes, motor vehicles, and ideal for use on vehicles and machinery brake master cylinders, oil filter housings, differentials and gearboxes..
  • [FUNCTION] VICRING Oil Extractor is designed to drain or top up the master cylinder and other fluid reservoirs, draw brake fluid from the fluid reservoir, and add new brake fluid before flushing the fluid at the caliper..
Check Stock

OEMTOOLS 24389 1.4 Gallons (5.3L) Manual Fluid Extractor, Fluid Extractor Pump, Oil Extractor Vacuum, Auto Oil Extractor

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
  • Easy Oil Change: No more crawling under cars for oil changes.
  • This topside oil extractor pump pulls oil from the dipstick tube, allowing you to stay right side up the whole time.
  • Move Fluid with Less Mess: An automatic shutoff valve and single piece construction are the cleanliness dream team, helping you keep the fluid off your floor.
  • Longer Reach: A 5 foot long flexible main suction hose connects to the improved 41 inch long dipstick hose adapter or to the 17 inch long suction hose adapter for plenty of reach.
  • Pump for Joy: The manual extraction pump quickly evacuates up to 1.4 gallons (5.3L).
  • Get fast, easy, and effective fluid extraction with no compressed air required.
Check Stock

12v 80w Electric Oil Change Transfer Pump Extractor Kits for Boat/Car/Lawn Mower Marine/Jet Ski/Truck/RV/ATV Changing Diesel Fluid Scavenge Suction

  • PORTABLE OIL PUMP CHANGE EXTRACTOR - The oil transfer pump is mini but powerful. With 5ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • FOR DIFFERENTIAL FLUID TRANSMISSION - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. Place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. Simply to do it yourself to ensure your engine runs smoothly..
Check Stock

EONLION 6 Liter Vacuum Oil Extractor 1.5 Gallon Fluid Change Pump Kit for Automotive and Marine

  • 【Almost any fluid】Great for draining motor oil, transmission fluid, coolant, brake fluid, gear lube, water,etc.
  • 【Almost any tool】Ideal for automotive vehicles, water crafts, ATV/motorcycles, farm equipment, lawn equipment, household plumbing and much more....
  • 【Easy operation】This Vacuum oil extractor pump just simply pumps 10 to 20 times in a row to create a 6 liters powerful vacuum，The tool has tick....
  • 【Easy to clean】When you finish using it, you only need to add Soap and water to the pump to clean it..
  • 【BUILT TOUGH 】Built with solid materials and construction for durability, including brass hose fittings, a 6-1/2 foot reinforced 5/8 in. fill hose....
Check Stock

VICRING Fluid Extractor 200CC Oil Extractor Pump Manual Suction Vacuum Made Plastic Automotive Fluid Syringe Pump Car Fuel Transfer 7oz Syringe Type Oil Pump

  • [HIGH QUALITY AND LEAK-FREE]VICRING Oil extractor pump is made of high quality plastic material, which is robust, strong and long-lasting. Fluid extractor exterior has a clear and distinct scale for easy checking of the liquid balance.Oil transfer pump has a capacity of 200cc..
  • [FREE ALL CONCERNS ABOUT CHANGING FUEL] VICRING Oil fluid extractor is designed with a double rubber ring, which is not easy to leak oil. Oil transfer pump is suitable for power steering, coolant, oil change, rear axle rear grease change, and even for transferring high viscosity fluids..
  • [NOT EASY TO FALL OFF]VICRING Fluid extractor interface is designed with a snap so that the extension rod will not fall off easily, and with two extension rods attached, the residual oil at the bottom can be simply pumped out. The back cover of the fluid extractor pump is removable so that the remaining oil inside can be cleaned after use..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or....
Check Stock

6.0 Liter Brake Pump Pneumatic Fluid Oil Extractor Stainless Steel Oil Change Vacuum Fluid Extractor Pump for Any Vehicle Fluid Change Tool No Leaks Oil Extractor Pump

  • Work Freely and Widely -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. Not....
  • Easy to Operate: The pneumatic way for higher speed of oil change.
  • just need to connect with air compressor. Easy to do the oil / fluid changing for....
  • Vehicle Fluid Removal Tool: At 6 liters of capacity, this fluid-extractor pump can be used for oil and fluid changes on most light and heavy duty....
  • Brake Bleeding Hose-- Makes your oil extractor multi-functional. One new brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid....
  • Included components: Fluid Extractor 60" (1.5M) PVC Steel Braided Suction Hose 3/8" (9.5mm) x 17" (430mm) Dipstick Tube, 3/8" (9.5mm) x 30" (750mm)....
Check Stock

Prokomon Engine Oil Extractor Pump Brake Fluid Extraction Syringe Vacuum Filling and Extracting Pump

  • ◇ Super Function: Use the simple syringe action of the car fluid transmission manual pump syringe bottle-gearbox, brake, steering system,....
  • ◇ High-quality Materials: Superior MaterialsThe Oil Pump Extractor with heavy duty construction offers great strength and durability. Built-in dual....
  • ◇ General Purpose: It is very suitable for emptying or filling the master cylinder and other fuel tanks, pumping out the brake fluid from the fuel....
  • ◇ Easy to Measure: the capacity is 1500mL.
  • the size is 22.8 x 22.8 x 3.9 inches (58cm x 10cm x 10cm).
  • the streamlined design allows access to narrow....
  • ◇ Widely ApplicationIdeal: for extracting or changing engine oils or lubricants in ATV's, boats, farm equipment, industrial gear boxes, motor....
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
  • This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inle....
Check Stock