Reviews Transmission Cooler With Npt Fittings

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps

  • 【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.
Check Stock

Improved Racing EGM-106 Low-Profile Oil Cooler Adapter for GM LS Engines, 10AN

  • 100% bolt-on unit replaces the factory oil bypass cover, just above the oil filter, and makes for easy installation of an oil cooler on any rear sump GM LS family engine. No oil filter relocation is required.
  • Slim design provides maximum clearance for aftermarket headers.
  • Features two 1/8” NPT ports for oil sensors or a turbo oil supply line.
  • 6061-T6 billet aluminum construction and black anodized finish. Female -8AN O-ring boss threads. Includes two black anodized aluminum fittings with Viton O-rings for -10AN lines.
  • Made in USA. Lifetime manufacturer's warranty.
Check Stock

MOTOKU New HSS 1/16-27 NPT Taper Pipe Thread Tap

  • Cuts internal threads in pipes. Ideal for pipe fittings..
  • Nominal size of the tap is that of the pipe fitting being tapped.
  • Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP).
  • Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA..
Check Stock

SUNGATOR Brass Barbed Hose Fittings 1 Barb to 1 NPT Male Threaded End Hose Barb Pipe Fittings Hose Adapter Connector with Sealing Tape and Hose Clamps 2 Pack

  • 【SIZE AND PACKAGING】: 1"barb X 1"NPT male pipe, package includes 2 hose barb fittings, 1 sealing tape, 2 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel.
Check Stock

Class A Customs | UM-1500 | One (1) UnderMount 15 Gallon RV Fresh and Gray Water Holding Tank RV Concession

  • 15 Gallon Capacity Fresh or Gray Water Holding Tank Manufactured by Class A Customs - NSF CSA Approved - Fresh & Drinking Water Safe - BPA FREE.
  • WATER TANK MEASUREMENTS: 36 Longest Length (not including fittings) x 8.5 height x 13 width Average thickness 7/32 +/- (+/- .25" on each measurement) Designed to fit between the cross members of trailers.
  • TANK BUILT-IN FITTINGS: 2 (Two) 1 " Dia screw in balloon fittings (threaded female - NPT Standard) fitting will be closed, to use remove inner membrane with razor knife 2 (Two) " Dia screw in fittings (threaded female - NPT Standard).
  • NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish..
Check Stock

Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34.5” Longest Length (not including fittings) x 12” x 17.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Check Stock

WYNNsky Industrial Air Coupler and Plug Kit, 3/8 Inch High Flow Body Size, 1/4 Inch NPT Threads Size, Steel Material, 9 Pieces Air Compressor Hose Accessories Fittings

  • 3/8 High Flow Body Size: 3/8 Inch body size air fittings provide up to 70% more air flow than 1/4 Inch body air fittings, 1/4 Inch body air fittings provide 35 SCFM at 100PSI working pressure..
  • Air Fittings Standard: There is six locking balls in the coupler which hold the plug securely, sleeve guard is designed to reduce the potential of accidental disconnects for consistent performance. 300PSI of Max Working Pressure..
  • Application: This 3/8 Inch body size with 1/4 Inch NPT threads size air coupler and plug is used to connect components to an air compressor. 1/4 Inch NPT threads size compatible with most air tools and air hose. These fittings can be used with other brands’ fittings with same type and body size. Seal tap is needed..
  • Material: Heat-treated steel air plug which features higher corrosion resistance and longer life. Zine-Plated steel coupler for added durability and reliability..
  • This 9 Pieces air fittings kit including 1pc 1/4 Inch MNPT coupler, 2pcs 1/4 Inch FNPT coupler, 4pcs 1/4 Inch MNPT plug, 2 pcs 1/4 Inch FNPT plug. WYNNsky is committed to providing outstanding value, top customer service and long-lasting, high-quality products to our customer..
Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock