Reviews Trailer Wire Junction Box Led

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....
Check Stock

Maxim 10220GC Prime Acrylic & Grass Cloth Double Shade Drum LED Flush Mount, 3-Light 19.5 Total Watts, 6"H x 16"W, White

  • PRIME FLUSH MOUNT LIGHT DIMENSIONS: 5.5" High x 16" Wide, Weight: 5.07 lbs., Ceiling Canopy: 13.75" W x 13.75" Long x 1.35" D.
  • LIGHTING: 3-6.5 Watt PCB Integrated LED Base, LED Bulbs, Dimmable with Electronic Low Voltage (ELV) Dimmer (3000K, 90CRI, 1365 Lumens) 19.5 Total Watts, Bulb(s) Included.
  • INSTALLATION: 6" Wire and Hardware to Mount Fixture to an Existing Junction Box Included (Junction Box Not Included).
  • DETAILS: Constructed of Steel with White Finish and Grass Cloth Shade.
Check Stock

Partsam Set RED AMBER LED Trailer Fender Bullet 3/4" Led Clearance Marker Light Left Right

  • Partsam SET(RIGHT&LEFT) Bright Red and Amber LED Trailer Fender Marker Lights.
  • Pre-wired assembly mounts on top or side of fender.
  • Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses..
  • Amber LED light points toward front of trailer to act as front clearance light.
  • Red LED light faces rearward to act as rear clearance light.
  • 2-Wire design - includes ground wire and lead wire for power(Black is positive and White is negative).
  • Installs on left fender (driver's side) of trailer & right fender (passenger's side) of trailer, NO SCREWS INCLUDED.
  • LED Fender Lamps utilizing low profile single-diode LED lamps mounted into an equally low profile housing these lamps are durable, attractive and inexpensive.The LED lights are 3/4" Round. Housing dimensions: please check the pictures in the listing.
Check Stock

Partsam 6Pcs 5x3' Rectangle Stop/Turn/Tail & Backup/Reverse Truck Trailer Hitch Light 12 LED Grommet Hardwired Flush Mount (4xRed+2xWhite)

  • Package includes 6 Pieces 5x3 Rectangle Led Stop Turn Tail Lights and Backup Reverse Truck Trailer Hitch Lights(4 Pieces red lights and 2 Pieces white lights). Rate for 12V,test to 13.8V.
  • Each led tail light has 12 leds and provide super night vision and enhance visibility during night. Functions of 5x3 Rectangle led trailer lights: stop light, turn signal light, tail lights (Red 5x3 lights) and back-up lights or reverse lights(White 5x3 led lights). NOTE: People call it 3x5 rectangle led lights on Market, but the actual sizes are as following: 5.14" x 3.27" x 1.00" (light only), 6.25" x 4.26" x 1" (overall size), drill a hole about 5-5/8" to install it.
  • These taillights are HARDWIRED with 3 wires: White Wire is the Ground.
  • NOTE: These 3x5 lights are NOT "plug and play" lights. It does not have the standard 3 prong plug that these style trailer lights typically do, You need to hardwire them. It’s a very easy thing to do.
  • These led trailer tail lights are univeral for almost all vehicles, such as: Trucks, trailers, tractors, semi trailers, Dump Trucks, horse trailer, enclosed trailer, cargo trailer, golf cart, flatbed, UTV etc..
  • Warranty: We truly offer 1 year warranty for these recta....
Check Stock

LIMICAR Trailer Lights, Upgrade IP68 Halo Glow Trailer Light Kit, Brake Stop Turn Tail License Plate LED Trailer Lights with 25ft Trailer Wiring Harness Kit for Truck Marine RV Boat Camper

  • PREMIUM MATERIAL: Trailer Lights includes 2pcs Rectangular combination stop / brake / reverse / tail / turn signal halo tail lights, 2pcs amber clearance lights, 25ft 4 pin wire harness, license plate bracket and mounting mounting screw, bolt and hardware, 4pcs reflective stickers. The tail lights are made of high quality ABS housing + PC lens, shockproof and dustproof, ensures long lasting durability..
  • PRACTICAL FUNCTIONS: Both of the LED trailer lights used as stop, turn, brake, tail, rear reflector, side reflector and side marker light. Besides, the left light has a license plate illuminator function. "Halo-Glow" design gives a new look for your vehicle. Much brighter and lights faster with lower energy consumption, guarantees super visibility and durability..
  • WATERPROOF RATE: IP68. Effectively protects the light from the invasion and corrosion of sand, dust, dirt, rain, snow, etc. Upgraded lampshade surface without screws, the LED trailer lights are completely welded together, the LED trailer lights are completely welded together. Featured great sealed and waterproof performance..
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

Partsam RED Amber LED Trailer Fender Bullet 3/4" Led Clearance Marker Light Front Rear - Clear Set, Trailer Fender Lights, Trailer Fender Clearance Lights Assembly with Bracket Trailers Over 80" Wide

  • Partsam SET(RIGHT&LEFT) Bright Red and Amber LED Trailer Fender Marker Lights.
  • Pre-wired assembly mounts on top or side of fender.
  • Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses..
  • Amber LED light points toward front of trailer to act as front clearance light.
  • Red LED light faces rearward to act as rear clearance light.
  • 2-Wire design - includes ground wire and lead wire for power.
  • Installs on left fender (driver's side) of trailer & right fender (passenger's side) of trailer.
  • LED Fender Lamps utilizing low profile single-diode LED lamps mounted into an equally low profile housing these lamps are durable, attractive and inexpensive.The LED lights are 3/4" Round. Housing dimensions: please check the pictures in the listing.
Check Stock

CZC AUTO 12V Submersible LED Trailer Tail Light Kit for Under 80 Inch Trailer Boat utility Trailer Waterproof (Trailer light kit)

  • Left and Right trailer tail Lights have 7 functions : stop/turn/tail/rear reflector/side reflector/side marker light/ license plate light. The trailer led lights are suitable for under 80 Inch width towing vehicles, like boat,utility trailer, truck, snowmobile, etc..
  • 18 Gauge 100% pure copper wire harness ensure trailer lights LED do good job underwater! All diodes are LED, NOT any incandescent bulbs! 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and longer lifetime! The waterproof trailer tail lights comply with DOT FMVSS108 certificate approval.
  • Excellent Waterproof/Submersible Lights for Boat Trailer. Sonic Welding Sealing Technology ensures sealing solidity of the tail lights. Every possible gap is sealed well with marine grade glue, such as wire's entrance holes and edge of the lens.
  • Easy to install the submersible trailer lights. Please make sure that connect wiring and no electronic short before marine/underwater. Wiring diagram ships with trailer lights, you can also find it on instruction sheet.
  • CZC AUTO, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PLEASE NOTE: Any problem in using our submersible trailer tail lights,....
Check Stock

Partsam 2Pcs Flat Line Double Face Led Turn Signal Lights Amber/Red, Flat-line Round Led Pedestal Lights Fender Mount Stop Turn Tail Lights Clear Lens, Single Mount

  • Chrome Plastic 20 LED 12" Double Face Trailer Light Bar with Double Metal Stud Mounts, Approx. 2-1/16" Apart. Overall Length 11-3/4". Overall Width 2-1/4". Pre-wired design and Double Metal Stud Mounts..
  • 20 Amber LED / Amber Lens and 20 Red LED / Red Lens. Dual Function Light Bar, Marker Light and Turn Signal: 3 Wires (Hard Wired), White Wire - Ground, Red Wire - Turn, Black Wire - Marker. These are NOT “plug and play” lights..
  • This double faced amber/red pedestal LED is commonly used for additional visibility in stop/turn/tail functions in heavy and medium duty trucks..
  • Dual-face Led Truck trailer light bars installs on your truck semi trailer fender: Amber light faces the front of trailer and Red light faces the rear of trailer. The placement is versatile..
  • DOT compliant for street legal lighting and Fits for Kenworth Peterbilt Freightliner Western Star International Mack Paccar and other Truck lights.
Check Stock