Reviews Trailer Leaf Spring Bolts

WorldPac Pack of 8 - Recessed Tie Down Anchor with Heavy Backer Plates and Carriage Bolts Included (6,000 lb. Capacity)

  • (Pack of 8) Heavy Duty Application, Assembly break strength of 6,000lbs Capcity – Complete 112Pcs Set.
  • Includes 4 Recessed Tie down, 4 Backer Plates at 3mm thick and 96pcs Bolts Hardware.
  • All parts and hardware are zinc plated for corrosion resistance.
  • 3/8″ x 2 1/2″ Carriage bolts with Spring Washer to prevent vibrate loose.
  • Applications: Enclosed Trailer, Motorcycle, Snowmobile, Quad, Landscaping Equipment, Farm Tools and Many More.
Check Stock

M-Parts 2 Pairs of SW4B Trailer Spring - 25-1/4\ Double Eye 4-Leaf Spring 1-3/4\ Wide for 3,500 lbs (3.5K) Trailers (1750 lb Capacity Per Spring)

  • SW4B Trailer Spring - 25-1/4" Double Eye 4-Leaf Spring 1-3/4" Wide for 3,500 lbs (3.5K) Trailers (1750 lb Capacity Per Spring).
  • Length from center of spring eye to center of spring eye: 25-1/4".
Check Stock

Gripon Pack of 6 - Recessed Tie Down Anchor with Heavy Duty Backer Plates and Carriage Bolts Included (6,000 lb. Capacity)

  • (Pack of 6) Heavy Duty Application, Assembly break strength of 6,000lbs Capcity and WLL 2000lbs - Complete 84Pcs Set.
  • Includes 6 Recessed Tie down, 6 Backer Plates at 3mm thick and 72pcs Bolts Hardware.
  • All parts and hardware are zinc plated for corrosion resistance.
  • Grade 5 - 3/8" x 2 1/2" Carriage bolts with Spring Washer to prevent vibrate loose.
  • Applications: Enclosed Trailer, Motorcycle, Snowmobile, Quad, Landscaping Equipment, Farm Tools and Many More.
Check Stock

2 Pcs Boat Trailer Leaf Springs 25-1/4\ 25.25\ 4 Leaf 5000 lbs Capacity Per Pair

  • These 25 1/4" double eye leaf springs are rated at 2,500 lbs each for a total of 5,000 lbs. capacity per axle..
  • Double eye 4 Leaf Spring. 1 3/4" wide. 9/16" Inside Diameter nylon bushings included..
  • They are commonly seen with 5k or 6k lb. capacity axles..
  • They come with 9/16" bushings pre-installed, if you're replacing the springs on a boat trailer you will most likely need to switch those out to 1/2" bushings and hardware..
Check Stock

Trailer 6 Leaf Heavy Duty Slipper Spring Suspension and Tandem Axle Hanger Kit for 3 Tubes - 7000 Pound Axles

  • (4) 6 Leaf slipper Spring for 8000 lb Axles.
  • (4) U-bolt Tie Plates for 1-3/4" or 2" Spring.
Check Stock

Seachoice Trailer Coupler, Repair Kit, 2 in.

  • Quickly mounts to your trailer tongue. Choose from vertical channel mount (fits 3-1/2 inch wide OD / 3 inch ID vertical channel with 2 inch on center bolt pattern secure with 5/8" pins or bolts) or square plate 4 bolt mount (4-1/2 inch square bolt pattern).
  • Smoother safer towing. Improves your ride, reduces wear & tear on pickup & trailer. Great for heavy duty trailers from end dumps, race trailers, cargo trailers, tilt trailers, storage container & flat beds Instant air ride for your trailer..
  • 20,000 lbs rated trailer towing capacity with a cast 2 5/16 inch heavy duty demco cast coupler. 2,000 lbs tongue weight. Great for bumper pull race trailers, dump trailers and skid steer trailers..
  • Air ride technology: Built-in HD air bag for a smoother towing experience with built in height adjustment plus weight adjustable. Perfect when you don't know what pickup will be towing your trailer. Fine tune for your towing weight. Just add air for heavier loads. Absorbs the road bumps, thumps & bangs on whatever road you travel.
  • Made by Shocker Hitch USA. Optional weld-on vertical tongue adapter available &sold separately. Note: The main pivot bolt used in the Tongue Mount air coupler is a custom made 1 inch diameter 1045 medium carbon steel bolt. Heat treated to pre....
Check Stock

Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded

  • Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
  • Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
  • The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
  • Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
  • 3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Check Stock

Father Knows Best

  • Replaces rubber equalizers for E-Z Flex heavy-duty rubber suspension system by Dexter Axle.
  • For 33" axle spacing and axles up to 6000lbs. capacity.
  • Retrofits to existing leaf spring axles that use 013-104 style equalizers.
  • 26.00" Double eye springs - tandem axles.
  • Requires no welding, grinding, or cutting of the trailer frame or axle hangers.
Check Stock

Deadwood (Vintage Contemporaries)

  • Replaces rubber equalizers for E-Z Flex heavy-duty rubber suspension system by Dexter Axle.
  • For 33" axle spacing and axles up to 6000lbs. capacity.
  • Retrofits to existing leaf spring axles that use 013-104 style equalizers.
  • 26.00" Double eye springs - tandem axles.
  • Requires no welding, grinding, or cutting of the trailer frame or axle hangers.
Check Stock