Reviews Towing Balmount Adjustable

Shocker HD Max Black Air Hitch Combo Ball Mount with Sway Bar Tabs, Fits 2-1/2\ Hitch

  • ...bs. Order with 2 Sway Arm Kits for use with Trailers over 10K lbs. 8 Adjustment Holes: 8 Adjustment Holes for 1/2" to 4-1/2" of drop..
  • 20,000 lbs Heavy Duty Capacity: 20,000 lbs towing capacity and a 2,000 lbs tongue weight. Combo Ball Mount Tow Rating: 2-5/16" ball rated at 16,000 lbs & 2" ball rated at 8,000 lbs. Adjustable for Weight: Fine tune for your towing weight. Just add air for heavier loads. Matte Black Powder Coat Finish: Impact Resistant Premium Powder-Coat Finish on Base Frame..
  • Comes complete with Shocker HD air base frame hitch assembly with built in HD airbag, adjustable combo dual ball mount (2" & 2-5/16" balls) with sway bar tabs and two d-handle ball mount pins. Sway control friction bar assembly sold separately. Great for Pickups: Fits Great for Full Size Pickup Trucks & Vans, Midsize Pickups & Select SUVS (with receiver under bumper)..
  • The Shocker Hitch is a heavy duty unit that in most cases exceeds factory towing weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the truck that is mounted on, the trailer coupler rating and the ratings of the trailer you are towing. Manufactured by Shocker Hitch USA in Arthur, ND..
Check Stock

CURT 13704 Camper Adjustable Trailer Hitch RV Towing, 2-Inch Receiver, 5,000 lbs., Fits Frames up to 66 Inches Wide

  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer.
  • EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 66 inches wide.
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage.
Check Stock

CURT 45928 Adjustable Trailer Hitch Ball Mount, 3-Inch Receiver, 10-5/8-Inch Drop, 2 and 2-5/16-Inch Balls, 21,000 lbs , Black

  • HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 10-5/8-inch drop or 8-5/8-inch rise.
  • SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point.
  • POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-5/16-inch ball for 21,000 lbs.
  • PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 3-inch x 3-inch trailer hitch receiver.
  • WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.
Check Stock

CURT 45900 Adjustable Trailer Hitch Ball Mount 2-Inch Receiver 6-Inch Drop 2 and 2-5/16-Inch Balls 14,000 lbs Black

  • HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 6-inch drop or 5-1/4-inch rise.
  • SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point.
  • POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-5/16-inch ball for 14,000 lbs.
  • PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches.
  • WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.
Check Stock

CURT 45902 Adjustable Trailer Hitch Ball Mount, 2-1/2-Inch Receiver, 6-Inch Drop, 2 and 2-5/16-Inch Balls, 20,000 lbs , Black

  • HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 6-inch drop or 5-1/4-inch rise.
  • SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point.
  • POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-5/16-inch ball for 20,000 lbs.
  • PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-1/2-inch x 2-1/2-inch trailer hitch receiver. It's perfect for heavy-duty class 5 hitches.
  • WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.
Check Stock

CURT 13701 Camper Adjustable Trailer Hitch RV Towing with 2-Inch Drop, 2 in. Receiver, 5,000 lbs, Fits Frames up to 51 Inches Wide

  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 5,000 lbs. GTW, 500 lbs. TW, 6,000 lbs. WD and 600 lbs. WDTW (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer.
  • EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 51 inches wide.
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage.
Check Stock

CURT 48640 Raw Steel Adjustable Pintle Hitch Lunette Ring 3-In ID, 12,000 lbs, 11-3/4-Inch Channel Height

  • HEAVY-DUTY TOWING. This adjustable lunette ring provides a heavy-duty towing connection between your truck and trailer. It securely couples to a pintle hitch or clevis bar and is commonly used for construction, agriculture and military applications.
  • RELIABLE STRENGTH. For maximum confidence on the job, this lunette ring is rated to tow 12,000 lbs. gross trailer weight (limited to lowest-rated towing component).
  • VERSATILE FIT. This lunette ring hitch features an inside diameter of 3 inches to fit a wide variety of pintle hitch options. It can be coupled to most pintle hooks and ball and pintle hitch combinations (sold separately).
  • ADJUSTABLE INSTALL. For a flexible installation, this pintle hitch lunette ring comes with a channel mount for easy vertical adjustment. The 11-3/4-inch lunette channel allows for 5 distinct height adjustment positions, ensuring level towing.
  • TOUGH BUILD. This lunette ring and lunette channel are constructed from solid steel for superior strength. They come with a raw steel finish for ready painting as needed.
Check Stock

Funny Shocker T-Shirt – This Little Piggy Got None – White

  • ...ny sway from wind or road conditions. For 2-5/16″ Couplers & Made Fits Pickup Trucks Only: The Air Equalizer is designed for pulling with a Pickup Truck ? Comes with 2-5/16″ hitch ball. (2″ ball not included) Air Ride Technology: Built in air bag + 4 bump cushions direct the road shock through the air spring..
  • Adjustable & Heavy-Duty: 12,000 lbs towing & 1,200 lbs tongue weight capacity plus 7″ or 9″ of Adjustment (5″ of rise to 2″ drop or choose 5″ rise to 4″ drop). Fine tune for your towing weight. Just add air for heavier loads. Designed for 6,000 to 11,500 lbs gtw camper trailers. Available for 2″,  2 1/2″ & 3″ receiver hitch tubes: Works great on pickup trucks.
  • Kit includes: Air Equalizer, XR Ball Mount Base frame and two-handled hitch pins w/clips, round bar weight distribution hitch & 2 sway friction sway control arm bar kits and mini ball kits..
  • Fits Pickup Trucks Only: This is designed for pulling with Pickup Truck – it will not work with SUV/CUV’s with coil over springs. The Shocker Hitch is a heavy-duty unit that in most cases exceeds factory towing weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the truck that is mounted on, the traile....
Check Stock

CURT 45799 Adjustable Trailer Hitch Ball Mount, Fits 2-Inch Receiver, 5-3/4-Inch Drop, 1-7/8, 2, 2-5/16-Inch Balls, 10,000 lbs , Black

  • HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The shank can be flipped to provide up to 5-3/4-inch drop or rise.
  • SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point.
  • POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 1-7/8-inch ball is rated for a capacity of 6,000 lbs., the 2-inch ball for 7,500 lbs. and the 2-5/16-inch ball for 10,000 lbs.
  • PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches.
  • WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable black powder coat finish, and the three hitch balls are protected with a corrosion-resistant chrome plating.
Check Stock