Reviews Torco Transmission Fluid For Gas Engines

ABN Manual ATF Filler System – 3L Manual Transmission Fluid Pump Tool for Automatic Transmission with System Adapters

SAVE MONEY ON TRANSMISSION SERVICE WORK: Checking and changing your transmission fluid keeps your automatic transmission lubricated and running smoothly and it helps to avoid wear on your clutches.
But going to a mechanic can cost up to a few hundred for a transmission fluid change.
Skip the hassle by changing the transmission fluid yourself with the ABN 3L Manual ATF Fluid Pump Automotive Fluid Transfer Pump Fluid Dispensing System.
BUILT TO LAST: Large 3-liter (101.4 oz) fluid container is made of thick plastic for durability and longevity and features 4 supports on its base to enhance stability while you work.
Pressure gauge can register up to 30 PSI and faces upwards for easy visibility.
5.3 foot (1.6m) fluid dispensing hose features swivel thread connector to link to filler unit and a metal dispenser with a shut off valve.
Metal dispensing nozzle uses an easy-release locking mechanism to hold adapters in place securely.
CONVENIENT STORAGE SYSTEM: With so many little parts it might be easy to lose pieces, but the 21-inch hook and loop adapter belt and 14-inch (35.5 cm) extension band easily fit around the fluid transfer pump automotive filler system for easy organization when working or in storage.
11 elastic slots hold the included transmission fl....

Motorcraft MERCON V is a premium-quality automatic transmission fluid.
recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
Do not use in transfer cases where MERCON ATF was previously recommended.
Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.

Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications.
Heating Fluid: Engine Coolant, Water, other No pump needed (thermosiphon principle).
Engine Displacement: 350 – 500 CID (5.7–8.2 L).
Volts: 120v - kW: 1.5 - AMPS: 12.5 - 60Hz.
Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C).

22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
Porous material allows fluid to quickly pass through into funnel or pan..
Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..

Motorcraft MERCON V is a premium-quality automatic transmission fluid.
recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
Do not use in transfer cases where MERCON ATF was previously recommended.
Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.

SAME TOOL THE DEALER USES:【For select chrysler dodge jeep vw vehicles】Level Measuring tool Designed to check and adjust ATF fluid on your vehicle. / Allows you to check fluid level without going to the Dealer..
【 PREMIUM TOOL 】Allows you to Check Level on 2.7 , 3.5 , 3.6 3.7 , 5.7 , 6.1 , 6.4 Engines that ORIGINALLY CAME WITHOUT A DIPSTICK. without going to the Dealer..
【TRANSMISSION / TRANY KIT】Dip stick Tool, Instructions / directions . New o-ring for the sealing Cap.
【 USE 】Easy To Read light colored scale with clear markings. As with the Genuine Dealer Tool (9336), this dipstick is used to measure the fluid level, and then removed and cap put back on the tube. Directions included will let you check your fluid level Cold or Hot or with a scan tool..
【WARRANTY】This Tool has been made to stringent quality standards with a LIFETIME Replacement Warranty.

Motorcraft MERCON V is a premium-quality automatic transmission fluid.
recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
Do not use in transfer cases where MERCON ATF was previously recommended.
Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.

Motorcraft MERCON V is a premium-quality automatic transmission fluid.
recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
Do not use in transfer cases where MERCON ATF was previously recommended.
Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.

Motorcraft MERCON SP is a premium-quality fluid recommended by Ford Motor Company specifically for use in Ford, Lincoln and Mercury vehicles that require MERCON SP type fluid.
This product also provides excellent performance in electronically controlled automatic transmissions.
It provides protection against rust and corrosion.
Check owner guide and transmission fluid charts for application.
Do not use in transmissions requiring MERCON V, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid, or Type-F fluid.