Reviews Tool And Die

Pocket Level 4\ x 1.8\ Mini Spirit Level 3 Vials Magnetic Base

  • The item is Swanson Tool TL002M Magnetic Die Cast Torpedo Level.
Check Stock

Swanson Tool Co TL002M 9-Inch Magnetic Die Cast Torpedo Level

  • The item is Swanson Tool TL002M Magnetic Die Cast Torpedo Level.
Check Stock

Snaps Rivet Grommet Prong Eyelet Popper Fastener Self Cover Fabric Button Hand Press Machine Set

  • [Handpress Machine] Universal Hand Press Machine for grommets, snap buttons, rivets, fabric covered buttons.
  • [Snap Button Dies] 1 set of die for 10 mm 'S' spring press fasteners type VT2 (includes 4 pieces) 1 set of die for 12,5 mm 'S' spring press fasteners type T54 (includes 4 pieces) 1 set of die for 15 mm 'S' spring press fasteners type Alfa (includes 4 pieces) 1 set of 9.5mm Perforated prong snap button fastener button tool/die (includes 2 pieces).
  • [Rivet Dies] 1 set of 7mm Rivet Die/Mold (includes 2 pieces) 1 set of 9mm Rivet Die/Mold (includes 2 pieces).
  • [Grommet Eyelets Dies] 1 set of 5.4mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 7.5mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 9mm Inner Diameter Grommet/Eyelet Die/Mold (includes 2 pieces).
  • [Hole Puncher] 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece brass base for a hole cutter.
Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • Muzerdo tap and die set is one of those toolboxes that are not immediately intuitive to have but become essential to your work once you have it. It does not matter if you are a mechanic, a craftsman, a metal or woodworker, or even a DIY enthusiast, a tap and die set would be remarkably useful to you. Taps and dies are cutting tools used to create threads on components such as screws, bolts, nuts and to create a threaded hole to screw components into..
  • A tap is a threaded tool that cuts or forms threads in the female portion of a mating pair. Therefore, a tap will create threads in the inside of a hole. On the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
  • Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
Check Stock

IWISS SN-PM Wire Crimping Tool & Wire Stripper Set 8 Pieces Quick Changing Die Sets for Heat Shrink Terminals Open Barrel Terminals MC4 terminals Insulated & Non-insulated Connectors

  • Purpose: SN-PM is an all-in-one wire terminal crimping tool set which includes an SN series compact crimper, 5 quick changing die sets, one wire....
  • 5 Pieces Die Sets: SN-PM wire crimper tool kit includes 5 quick changing die sets work with heat shrink, insulated nylon/vinyl terminals, open....
  • Wire Stripper: Ideal for copper and aluminum cables from 10-22 AWG. Multifunctional stripper & cutter. Built in shear cutter cuts solid or stranded....
  • Applications: Wire crimping tool set(8 pieces) ideal for electrical wiring projects in DIY, electronics, RV refit, RC race car, automotive audio,....
  • Compact Storage: Crimping tools are steel construction with comfortable cushioned grip handles. Supplied in a durable, plastic molded storage case..
Check Stock

Indiana Metal Craft US Navy Crest Stainless Steel Construction Switchblade Golf Divot Repair Tool with 0.75 inches Die Struck Magnetic Nickel Silver Enamel Ball Marker

  • SWITCHBLADE REPAIR TOOL WITH ENAMEL BALL MARKER: Navy CREST stainless steel construction switchblade divot repair tool with die struck magnetic nickel silver enamel ball marker. Divot tool has strong magnet to securely hold removable ball marker..
  • SIZE: The size of the stainless steel construction switchblade repair tool is 1.25 inches X 2.75 inches and also holds removable 0.75" die struck nickel-silver ball marker with enamel..
  • SUPERIOR DESIGN: This stainless steel divot repair tool is contemporary and modern design, solid, and durable (3 oz.)..
  • MADE: Tool is imported. Ball marker is 100% American proudly made in USA by Indiana Metal Craft..
  • OFFICIAL LICENSED PRODUCT: Official Licensed Product of the US Navy. By federal law, licensing fees paid to the US Navy for use of its trademark provides support to the Navy Trademark Licensing Program, and net licensing revenue is devoted to US Navy Morale, Welfare, and Recreation Programs..
Check Stock

Fein Metal Sheet Nibbler - 350 Watts Power Consumption, 210 Watts Power Output, 1800 RPM Strokes - 72324260120

  • Professional Grade - It has a rotating punch for up to 30% longer service life, has motor with outstanding performance and durability. It has low operating costs due to long tool life of punch and die..
  • Lightweight - It has optimum ergonomics, including a motor housing that is up to 20% slimmer due to an extremely narrow drive head..
  • Safety Ergonomic - It has chip protection mesh on vent slots. This tool has QuickIn rapid change system that allows for rapid, tool-free changing of the punch and die..
  • Multipurpose - It has cutting direction setting can be changed in 45.
  • Specifications - Power Consumption: 350 W, Strokes: 1,000-1,800 SPM, Cutting Speed: 7.5 ft./min., Cutting Width: 3/16.
Check Stock

FLKQC 13 Piece Watch Press Set | Watch Back Press Watch Back Case Closer Include 12 Dies with Metal Inserts

  • Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
  • Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....
Check Stock

Tshya 270Pack 2inch Sanding Discs Pad Variety Kit for Drill Grinder Rotary Tools Die Grinder Accessories with 1/8'&1/4' Shank Backer Plate, Sanding Pads Includes 36-3000 Grit

  • ... sangding Discs(26Pcs) and Aluminum oxide hook loop discs (240Pcs),sanding with common grits (P36-3000) to meet your various polishing requirements..
  • ✔ TWO TYPES SHANKS - We have found all the connection methods for your project as far as possible. Roll Lock 1/4 inch(6.35mm) Round shank works better with pneumatic tools.
  • 1/4 inch Hex shank more suitable for electric tools..
  • ✔ THREE WAYS CONNECT - The Air-Tool Backer Plate with 1/8"&1/4" Shank can work with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control. You can even put the pad directly on a pneumatic tool without shank..
  • ✔ PERFECT FOR DIE GRINDER - A special soft PU Foam adapter Pad has been developed for this Kit, you can easily install the Hook Loop sandpaper on the Black Disc Pad Holder, so that your can do more with die grinder,Time is Money！.
  • ✔ 270 PACK – 240Pcs 2 inch H&L Sanding Discs (P80/120/180/240/320/400/600/800/1000/1500/2000/3000 each 20Pcs), 15 Pcs Zirconia roll lock discs (P36/60/80 each 5Pcs), 9 Pcs Non-woven discs, 1Pcs Strip disc, 1Pcs Wool disc, 1Pcs Air-Tool Backer Plate with 1/8"&1/4" Shank, 1Pcs Disc Pad with 1/4"Round/Hex Shanks, 1Pcs Soft Foam Layer Buffering Pad, 1Pcs PU Foam adapter Pad..
Check Stock