Reviews Tm Pro Trigger Module

Adafruit 1918 Analog UV Light Sensor Breakout - GUVA-S12SD

photosensitive resistance module's most sensitive to ambient light, commonly used to detect environment around the brightness of the light, or MCU trigger relay module, etc..
module in the environment light intensity than set threshold, output high level DO end, when the environment light intensity more than set threshold, the DO output low level.
the DO output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change.
the DO output can be directly driven our relay module, which can form a light-operated switch..

This super low-noise dual-120mm fan unit is designed to sit on your receiver’s top air vents. It has a special raised air-chamber base, which covers 145 square inches, and air is drawn out over the entire area of this raised base..
The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller..
IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions..
Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full spe....

❃❃ MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)..
❃❃ 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection..
❃❃ The output opens automatically at the first time the load is connected.If the load is less than 50MA, automatically close the output after 30 seconds.
If the load is greater than 50MA, the output opens automatically..
❃❃ High Power High Efficiency: Discharge efficiency up to 96%. In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output.
continuously trigger the KEY port twice to close the output..
❃❃ Can be applied to solar panel turning to mobile phone charging, car charging retrofit, driving recorder power supply, household power supply, intelligent plugging transformation, fast charging adapter, etc..

MATCH-GRADE PERFORMANCE - At the top of the list of factors that go into making an accurate crossbow is a clean, consistent breaking trigger.
The Pro-Shot ACP trigger system provides match-grade performance by improving consistency and accuracy.
ADJUSTABILITY & SMOOTH FUNCTION - The Pro-Shot ACP hunting archery crossbow 3lb trigger is adjustable from one to two-stage configurations.
Also, it provides consistent clean and crisp trigger pull with no creep.
VERSATILE & CONVENIENT - The Pro-Shot ACP crossbow trigger fits most Excalibur Crossbows.
It features Frictionless Roller Catch Technology that eliminates any grit from the sear and catch.
The Pro-Shot trigger mechanism has a silent manual safety.
COMPATIBILITY - Standard fits: Micro 308 Short/315/335/355, Matrix 310/330/355/380/405/Sapphire, Phoenix/Vixen/Exocet 200/Exomax/Relayer Y25/Offspring.
Bullpup fits: Micro Suppressor, Matrix Bulldog 330/380/400.
NOTE - To use the Pro-Shot trigger with the older Exo series models the new #2006 scope mount also needs to be purchased.
Does not fit: Grizzly, GRZ2, G340, Axiom SMF, Ibex SMF, Matrix Cub, Matrix Sapphire, Equinox, Eclipse XT or Vortex.

The ES24TX Pro Micro ExpressLRS TX module is a upgrade version of ES24TX module..
Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory..

Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
With Optical Coupling Isolation,Triggering More Reliable and Stable.
2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.

HC-SR04 Ultrasonic Sensor Distance Module:using IO trigger for at least 10us high level signal..
The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back..
If the signal back,through high level,time of high output IO duration is the time from sending ultrasonic to returning.Test distance = (high level time velocity of sound (340M/S)/2..
Resolution:0.3 cm,Module precision:blind spots (2cm)-SUPER CLOSE..
The module performance is stable,measure distance accurately.SRF05,SRF02 ultrasonic ranging module comparable.This module is compatible with GH-311 anti-theft module..

Data buss doorlock alarm and gm(r) passkey/passlock.
Lock/unlock, driver's priority unlock, trunk/hatch, oem security arm/disarm, door trigger output and override.
Gen2 and 3 Gm(R) passkey3 transponder immobilizer & passlock 2 immobilizer via data bus.