Reviews Tie Rod Puller Tool

Orion Motor Tech OMT Inner Tie Rod Removal Tool Kit, Inner Tie Rod Tool for Tie Rod Removal and Installation, Master Inner Tie Rod Tool Set with 12 Crowfoot Adapters 1/2 Inch Drive Tube and Tool Case

  • INNER TIE ROD REMOVAL TOOL: This Orion Motor Tech inner tie rod removal tool set lets you remove and install inner tie rods without removing the rack and pinion.
  • the 1/2 Inch drive tube handle with a 2.2 in inner diameter allows servicing on small cars, pick-ups, and SUVs.
  • 12 CROWFOOT ADAPTERS: The 12 crowfoot adapters cover most common SAE and metric sizes of 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm.
  • UNIQUE DESIGN: Our inner tie rod remover's 20 inch tube handle lets you remove and install inner tie rods in places where sockets and wrenches can’t fit.
  • works on inner tie rods with inaccessible wrench flats.
  • SUPERIOR DURABILITY: Our tie rod drawing tools and adapters are steel forged for lasting strength.
  • the flexible sliding collar at the top of the sleeve tightly attaches the crowd feet adapters.
  • the knurled handle provides firm control.
  • HASSLE-FEE OPERATION: Thanks to intuitive design and clear instructions our rod removal set is easy to use.
Check Stock

For GM LS Harmonic Balancer Puller 25264 Crank Pulley Puller Automotive Replacement Engine Quickly Removes Harmonic Balancers without Tapped Holes

  • 【Compatibility】Compatible with GM engine models: 5.3L, 5.7 LS1, 6.0 LS2, 6.2 LS3, 7.0L , compatible with Chrysler,Dodge,Jeep engine models: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8. Not applicable to 1997 or earlier general LT (5.7L LT1003c4) series engines (threaded holes), not applicable to 2018 and newer Coyote balancers..
  • 【Unique Design】 The harmonic balancer puller adopts a "clamp-in" design, which can be disassembled without connecting the puller bolts to the balancer, which helps removing the balancer quickly and easily..
  • 【Material】Constructed from high quality carbon steel material , it is solid, durable and no deformation .The surface is coated with black paint, which can resist corrosion and rust, ensures long-term service..
  • 【Benefits】When this harmonic balancer pullers (without threaded holes) is working on the balancer, it do not require disassembly of the radiator. This is a unique design of buckle attachment that can be disassembled without fixing the tie rod to the balancer..
  • 【Satisfaction Guarantee】If you're not 100% satisfied with this tool set , simply return it for a full refund in 30 days, guarantee with 12 months’ warranty..
Check Stock

OEMTOOLS 37201 Tie Rod/Ball Joint Separator Set, 5 Piece, Replace Tie Rod, Separate Ball Joints and Pitman Arms, Pickle Fork, Ball Joint Removal Tool

  • SPEED UP REMOVAL PROCESS: Pickle fork tool set quickly separates tough-to-reach ball joints during tie rod replacement or maintenance.
  • CORRECT WHEEL ALIGNMENT: Eliminate uneven tire wear, handling problems, steering wheel wandering, and vibration with confidence using the tie rod and ball joint separator tool.
  • Return smooth steering back to working order.
  • BUILT FOR LONGEVITY: The ball joint remover tool has a rust-resistant finish and features knurled handle for a no-slip tight grip.
  • Pickle forks are perfect professional auto mechanics’ tools for difficult and heavy-duty applications.
  • WIDE VARIETY OF OPTIONS: The ball joint pickle fork set includes five different sizes: 11 inch x 1-1/8 inch, 11-3/4 inch x 1-5/8 inch, 11-5/8 inch x 1-7/16 inch, 16 inch x 11/16 inch, 16 in x 15/16 inch.
  • EASY ORGANIZATION: Tie rod removal tool set includes a sturdy blow-molded case for neat organization and rapid identification.
  • Tie rod tool set is easily transportable.
Check Stock

Weed Puller Tool, Stand Up Weed Puller Long Handle Removable Steel Tube and Non-Slip 4 Claw Iron Head Design, Grandpas Manual Weeders Easily Remove Dandelion Root Tool Gardening Lawn Yard（49 In）

  • ꕥ【Upgraded Weed Puller】Stand up weed puller has been upgraded from cast aluminum to metal iron, which solves the problem of 4-claw head, broken and bent wooden poles. Metal long shaft and 4-claw iron head spray paint will not rust. The weed puller is added with anti-slip function, uprooted weeds, making it an ideal weeding tool the garden tools for gardening..
  • ꕥ【Stand Up Weed Puller】The long handle standing up weeder is removable and has a length of 49 In. The grandpas weeder improves the traditional bending over to pull weeds, which can pull out weeds with one hand, without the need to bend over or kneel to pull weeds, and avoid back pain. The garden weeder is a good gift for grandfather, grandmother, grandpa, grandma, father, mother, husband and wife.
  • ꕥ【Metal Iron Manual Weeders】The hand weeder tool is made of metal iron. It consists of 4-claw iron head, long-handled steel pipe and nut. Compared to other plastic, aluminum and wooden weeders, DMDMBSR weeders are more durable. Whether it's dry weather or after a rain, hand weeders can uproot weeds..
  • ꕥ【How To Use? 】The weed puller is easy to use. The 4-claw iron head of the standing weed puller is aimed at the weeds, and the pedals are inserted into the soil, and the weeds and roo....
Check Stock

VEVOR Hydraulic Gear Puller 15 Ton Max Capacity Hydraulic Puller 2 or 3 Jaws Bearing Hub Separator 3.9 - 11.8 Hydraulic Puller Separator Tool for Pulling Hubs Flanges Gears Bearings

  • Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
  • Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
  • Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
  • Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
  • Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..
Check Stock

OEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer, Extra Long Forcing Screws for Hard to Reach Balancer Pulleys

  • MANY APPLICATIONS: The forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles.
  • M16 x 2.0 mm (GM), M14 x 1.5 mm (Dodge, Chrysler, and Jeep), M12x 1.75 mm (Dodge Chrysler, and Jeep), and M12 x 1.5 mm (Ford).
  • SAVE TIME AND MONEY: Car repairs can be expensive.
  • By using this harmonic balancer installer, you will be saving over $600.
  • You can also save time with this balancer installation tool by not waiting for repairs at the auto shop.
  • CONVENIENT PACKAGE: All of the pieces in this harmonic balancer installer kit come in one convenient package, making the pieces both easy to find and easy to store.
  • Never worry about losing pieces with this harmonic balancer puller set.
  • EASY TO USE: Assemble the threaded rod nut bearing with the bearing facing away from the hex.
  • Insert the threaded rod through the balancer and fastener into the crankshaft.
  • Use a second wrench to rotate the assembly.
  • EFFECTIVE: The three puller arms have a significant bite to grip and remove pressed-on harmonic balancers.
Check Stock

ATPEAM 3 Jaw Inner Bearing Puller, Jaw Pilot Bearing Puller Auto Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV

  • 3-Jaw Puller Set: Ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Premium Material: The 3-Jaw Bearing Extractor Puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Strong Puller Power: Structure design, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter..
  • Stable & Safe: The Blind Bearing Puller applies even pressure to preventing damage to bearings, also ensures stability during use.
  • Package Included: 1x 3-Jaw Inner Bearing Puller Tool. Size: 200x135mm. Wire rod length: 175mm. Bar length: 125mm. Arm length: 86mm..
Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

  • [Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
  • Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
  • [Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
  • Ball joint compressor control arm bushing press kit may even fit your tractor.
  • [Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
  • Ball joint kit will endure years of heavy use.
  • [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
  • Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
  • [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....
Check Stock

ARES 12105 - Outer Tie Rod End Puller - Drop Forged Steel Design – Universal Heavy-Duty Puller for Tie Rods and Ball Joints - Chrome Plated Finish – 2 1/2-Inch Jaw Spread

  • DESIGN CONSIDERATIONS: Our Outer Tie Rod End Puller features a special universal design that helps prevent the jaws from slipping on the steering knuckle when force is applied. The heavy duty drop forged steel design allows you to apply force to break the tie rod free from the steering knuckle without damaging either..
  • APPLICATIONS: This Tie Rod Remover works on front or rear wheel drive imports and domestics and castor stamped steel steering knuckles. The remover features a jaw spread of 0 to 2-1/2 inches and a throat depth of 3-1/4 inches, making it suitable for front end service on a wide variety of makes and models..
  • GET THE SET: We offer a full range of front end service tools. The complete set can be found under ARES 70840. We've got the tools that you'll need to get the job done now!.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Outer Tie Rod Remover, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, th....
Check Stock