Reviews Through Shaft

Martin SK 1 15/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1.94\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 1 5/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1.31\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 24MM Quick Disconnect Bushing, Ductile Iron, Metric, 24 mm Bore, 71.42 mm OD, 49.21 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

GM 6.2 & 6.5 Liter Diesel Engines: How to Rebuild & Modify

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

Makermotor 3/8

  • 3/8" shaft with 1 flat ("D" shaft) where flat to OD is 0.322" and the length of the shaft is 0.886" long.
  • Rated Torque: 6 N-m (4.4 ft-lb)DescriptionWe have noticed there are sellers on Amazon who have copied our description and sold a knock-off version of motor that resembles our product(s). Please be noted that products of Makermotor(TM) listed on Amazon are only sold through seller account of makermotor. We are not associated to the other Amazon sellers who have copied our description and we are not responsible for the poor quality and craftsmanship of their products..
Check Stock

Mr. Heater F232010 MH9BX Buddy 4,000-9,000-BTU Indoor-Safe Portable Propane Radiant Heater (Green)

  • Temperature Fuel Control Knob (23.5mm shaft) for MH9BX Mr. Heater Portable Buddy Propane Heaters (mfg 2009-Present), Part #32017.
  • This knob has a 23.5mm OD shaft size. Please measure outside diameter of knob shaft for proper fit..
  • For use on Mr. Heater, Heat Star, and Enerco MH9BX (mfg 2009 through Present) Portable Buddy Propane Heaters..
  • (*Use Part #73418 knob for heaters manufactured prior to 2009, where the knob has 12.7mm shaft base*.).
Check Stock

186F 9HP Diesel Engine 4 Stroke Single Cylinder 406CC Forced Air Cooling Diesel Engine for Agricultural Machinery

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

TB Woods Type QT QT22MM Sure-Grip Bushing, 22 mm Bore, 1.625\ OD, 1.25\ Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Steel for greater strength and shock resistance than cast iron.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

TB Woods Type QT QT14MM Sure-Grip Bushing, 14 mm Bore, 1.625\ OD, 1.25\ Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Steel for greater strength and shock resistance than cast iron.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock