Reviews Throttle Wire

4 in 1 45A ESC, 45A 2‑6S ESC with Double Hole Spacing RC Drone Quadcopter Electronic Speed Controller

  • ...quality high-frequency ceramic capacitors. High-end PCB production process, the pads are edged by metallization, which can prevent the pads from falling off during use. 3 oz copper thick, six-layer board, greatly reduces heat, thus increasing efficiency..
  • Anti-Jamming and Fast Response : Not only supports normal PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high temperature resistance, and easy to solder..
  • Feature-Rich : Using BLHeli‑S firmware, it has powerful performance and rich functions, supports multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, using other development boards, or using cleanflight or for setting or upgrading Betaflight firmware for ESC)..
  • Low Noise : PWM hardware drives the motor, with low noise and smoother throttle response. Damped Light technology and regenerative braking function make motor deceleration more responsive and effective, and control more accurate. Active recharge technology allows the battery to restore power and extend the sailing time..
Check Stock

Carburetor Carb With Throttle Cable Compatible with Honda ATV Fourtrax 200 TRX200SX TRX200 TRX200D 4 Wheeler Quad 1984

  • ★ Carburetor carb with throttle cable compatible with honda trx200sx trx200 trx200d..
  • ★ Compatible with honda trx200sx 1986-1990, compatible with honda trx200 1990-1991, compatible with honda trx200d 1991-1997, compatible with honda trx200 4 wheeler quad 1984..
  • ★ Packaging included carburetor, gas filter, throttle cable 46".(If the throttle line is too long , you can able to make it work by wrapping the wire a couple of times around the connecting bar inside the thumb lever housing to take up the slack.).
  • ★ For fourtrax 200 carburetor, trx200sx carburetor, trx 200 carburetor, trx200 carburetor, carburetor trx200d, trx200d carburetor..
  • ★ Please see the application data below to verify that this is the correct part number before ordering, please contact us by email if you have any question!.
Check Stock

POSENG LS LS1 LS2 LS6 Intake Manifold with 102mm Throttle Body Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Corvette Chevy SSR Cadillac CTS Pontiac GTO Firebird Saab 9-7X

  • 1.APPLICATION: For Cathedral Port LS1/LS2/LS6 Heads (for LS 4 bolt intake with cable drive only, not for drive by wire).For Specific Model Compatibility, please check the model list in the description.
  • 2.COMPATIBLE WITH: 1997-2004 Chevrolet Corvette.
  • 1998-2002 Pontiac Firebird Formula, Trans AM.
  • 3.NOTE: This intake manifold works well with 102mm Throttle Body, it can also work with 92mm throttle body (May be loose)..
  • 4.ROBUST PERFORMANCE: Made of 3MM thickness T6061 Sheet Aluminum, stay stable as always..
  • 5.PACKAGE INCLUDES: Intake manifold without rear map sensor port, 92mm throttle body, throttle position sensor (tps), gaskets, hardware, fuel rails, fuel crossover line.Injector not included..
Check Stock

Royitay Mini Dirt Bike Twist Throttle Accelerator Handle Grips and 50' Cable Assembly with Kill Switch For 7/8' 22mm Handlebar 49CC 80CC Motorized Bicycle Push Bike Quad Pocket

  • This restrictable throttle kit Fit for chinese 2 Stroke 80cc and 49cc Engine Parts Motorized Bicycle Push Bike,Mini Motos and pocket bikes..
  • Handlebar Grip material: Rubber.Handlebar length: one is 120mm, the other is 144mm.Handlebar Diameter: one is 7/8" 22mm, the other is 22.5mm..
  • This is a set of Handle Grips Throttle Cable Kill Switch( Cable total Length:about 80cm)..
  • the bend to the black part is about 110cm(43").
  • Please check the size measurement chart carefully before making payment..
Check Stock

Auto-Moto Carburetor with Throttle Cable for HONDA Recon 250 TRX250 TRX250TM TRX250TE (Fits: 2000 Honda Recon 250)

  • Replaces Carb fits Honda Models:TRX250 Recon 1997-2001, TRX250TE, TRX250TM 2002-2007.
  • Bolt bole spacing: 49mm /Air filter mount: 38mm/Intake inner diameter: 27mm.
  • If the throttle line is too long , you can able to make it work by wrapping the wire a couple of times around the connecting bar inside the thumb lever housing to take up the slack..
  • Package Includes: 1* carburetor as pictures / 1* Throttle Cable.
Check Stock

36 Volt Twist Throttle - for Currie Scooter with 5 Pin Connector for Schwinn S1000, S750, Ezip E1000 & Izip i1000 Electric Scooters

  • 36 Volt Twist Grip Throttle with 5-Pin Connector – for Many 36 Volt Currie Electric Scooters.
  • Compatible With – Schwinn S1000, S750, Ezip E1000 & Izip I1000 & i750 36 Volt Scooters..
  • 5 Wire Full Twist Throttle – 36 Volt 600 Watt, 750 Watt, 900 Watt and 1000 Watt DC Brush Motors..
  • Quality You Can Count On – Premium, Reliable and Dependable 36 Volt Controller.
  • Identical Replacement Part – Perfect Match When Used With a 36V Currie Controller XK-022D.
Check Stock

Odi Half Waffle V2 MX Lock-On Grips - 2 & 4-Stroke (Graphite)

  • The V2 Lock On System eliminates the need for wire and glue. Utilizing an OE spec throttle tube with a Snap On Cam System, the grip comes molded directly to the plastic tube. Simply replace the grip as you would the entire throttle tube. On the clutch side, the grip is molded to a plastic tube that features a lock jaw clamp to secure the grip to the bars. Simply slide into position and tighten the pre-installed clamp and you are ready to ride. No waiting for glue to dry, no sticky messes and the comfort of knowing that your grips are locked in place and aren’t going to slip off during your ride..
Check Stock

SPYMINNPOO 4 in 1 ESC 45A Electronic Speed Controller 2-6s ESC with Connecting Cables Fit for Unmanned RC Drone and for FPV Traversing Machine

  • ...ne, and the installation and wiring will become very simple. This incredible size and volume is specially designed for the racing class traverser.
  • Multiple Functions: Using BLHeli‑S firmware, powerful performance, support a variety of ways to set the ESC parameters, or upgrade the ESC firmware (such as through the throttle signal cable, using other development boards, or using cleanflight or Betaflight firmware to set or upgrade the ESC).
  • Anti Interference and Quick Response: Support not only ordinary PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra high speed throttle signal, but also the latest dshot 150, 300, 600 digital throttle for anti interference and quick response. Input and output lines using soft silicone wire, very durable, and high temperature resistance, easy to weld.
  • What You Get: 1 x ESC,3 x Wiring,1 x Capacitance,1 x Plug ,8 x Rubber Mat,1 x Wiring Diagram, please feel free to contact us if you have any question.We are committed to providing you with better products and services.
Check Stock

22mm Twist Throttle Accelerator Handle Grips, 50 90 110 125cc Pit Bike Dirtbike (Handle Grip + Cable + Throttle Clamp + flameout Switch) by CALU LUKY

  • 【22mm Twist Throttle Accelerator Handle Grips】Compatible with mini bike baja mb165 196cc 5.5hp, compatible with most of 50cc, 90cc, 110cc 125cc 140cc 150cc 200cc & 250cc 4-stroke dirt bike..
  • 【Includes】This handlebar replacement set includes：1* 1.2 m throttle line , 2* left and right handles , 1* throttle aluminum block, 1* flameout switch.The throttle cable assembly is easy to install, used in almost any bikes applications..
  • 【ON/OFF switch Standard Rating】: DC12V/10A , Cable Length 45cm With Two connectors.throttle cable,twist throttle,twist throttle cable,twist throttle,monster moto mini bike throttle cable,dirt bike throttle assembly,pit bike twist throttle,mini bike throttle cable,bike throttle cable,throttle grips,mini bike throttle cable..
  • 【Compatible 】The length of the cable is 47 inch For 50-1000cc dirt bike ATV chopper Fit 7/8" handle bar.22mm Twist Throttle Accelerator Handle grips 50 90 110 CC, Throttle Handle Grips and Cable Fits Mini Baja MB200 200cc 6.5hp and Mini Baja MB165 196cc 5.5hp.This Throttle Handle Grips with Cable AKA 196CC Throttle Handle,200CC Throttle Handle,Dirt Bike Thr....
Check Stock