Reviews Three Phase Motors

Mattel Games Phase 10 Card Game

Phase 10 is the Rummy-type card game with a twist!.
Be the first player to complete 10 varied phases with two sets of three, one run of seven, or seven cards with the same color..
Each phase is specific for each hand, meaning each player must complete one phase before advancing to the next round!.
“Wild” and “Skip” cards add excitement and deliver game-changing moments..
Phase 10 game is fun and enjoyable for the whole family!.

ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

Metallized polypropylene film non-inductive roller structure improves performance of the product and makes it durable..
Reliable insulation performance, excellent electrical properties and safe explosion-proof devices..
Heat resisting, small size, large capacity, low loss and good stability of capacitance..
Current with good impact resistance, strong overload ability..
Suitable for the start-up and operation of single-phase motors with frequency of 50HZ and 60Hz, such as air conditioners, compressors and motors..

This driver board can be fit for DC brush less without hall sensor three-phase motors.
It was with an heat sink,and also coming with speed controller and forward -reverse switch cable.
This brush less motor controller features wide voltage high power, suitable for both small motor and large motor..
This motor controller has the function of over-current protection.
This item can be used directly, when you got it, wide voltage 5-36V, high power 350W, with heat sink, lead wire, control switch, so convenient.

【LONG-TERM USE】Metallized polypropylene film non-inductive roller structure improves performance of the product and makes it durable..
【PERFECT PERFORMANCE】Reliable insulation performance, excellent electrical properties and safe explosion-proof devices..
【ADVANTAGE】450V AC run start capacitor with the following advantages,heat resisting, small size, large capacity, low loss and good stability of capacitance..
【STRONG OVERLOAD ABILITY】Current with good impact resistance, strong overload ability..
【SUITABLE FOR】This AC capacitor is suitable for the start-up and operation of single-phase motors with frequency of 50HZ and 60Hz, such as air conditioners, compressors and motors..

Metallized polypropylene film roller structure improves performance of the product and makes it durable..
Reliable insulation performance, excellent electrical properties and safe explosion-proof devices..
Heat resisting, low leakage, low loss and low impedance..
Current with good impact resistance, strong overload ability..
Suitable for the start-up of single-phase motors with frequency of 50Hz and 60Hz, such as air conditioners, compressors and motors..

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..