Reviews Threaded Leg Plate

Leofoto LM-365C Summit Series Systematic Bowl Travel Tripod Legs 5 Section Carbon Fiber CF

  • ► 70mm Diameter Top Plate / Bowl Socket w Push Button Safety Lock. ►10 Year Warranty.
  • ►Leg Section Tube Diameters: 36mm, 32mm, 28mm, 25mm, 22mm.►3 Position Leg Angle Locks 23° 55° 85°► Semi-Automatic Leg Angle Locks.
  • ►Features Toray 10 Layer 100% Carbon Fiber Legs. ►Special 1/4 Turn Leg Locks for Rapid Setup. ►Super Reliable 1 Piece Shims. ►Easy Link Mount....
  • ►Weight 4.34lbs (1.97kg) ►Max height: 60.6" (1540mm). ►Min Height 3.15" (80mm). ►Folded Length 19.3" (490mm) ►Max Load: 55lb (25kg)..
  • ►Includes Storage Case w Shoulder Strap. ►Flat 3/8" Stud Plate.►75mm Bowl Plate.►Removable Rubber Feet.►Spike Feet.►Center Column DC-364C....
Check Stock

Spectre Performance 8741 Black 3\ Air Duct Hose

  • Attach directly to any airbox inlet, plenum, intake tube or mounting plate with a 3" O.D. to bring cold air into the engine.
  • Memory-flex design helps retain its position and bends.
  • Kit includes 28 inches of ducting and two threaded PVC couplers.
  • Thread multiple pieces together for longer applications.
  • Replacement threaded coupler - P/N 87411.
Check Stock

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • ...ttachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

SmallRig R5 / R5 C / R6 Cage for Canon R5 R6 R5 C, Aluminum Alloy DSLR Rig Stabilizer with Cold Shoe , 1/4"-20 and 3/8"-16 Threaded Holes for Filmmaking , Video Shooting 2982B

  • ... for Canon R5 R6 R5 C camera with a wide range of accessories mounting points to make a convenient work of videography . It is secured to a camera via one 1/4"-20 screw and two locating pins with silicone cushions on the top and bottom to prevent scratches.
  • 【Multiple Mounting Options】Multiple 1/4"-20 and 3/8"-16 threaded holes for attaching such accessories as Side Handle 2093, Top Handle 1984 and Arm with Ball Heads 2070. The top comes with a cold shoe mount for microphones and LED lights. With 3/8"-16 locating holes for ARRI fit Top Handle 2165, Side Handle HSS2426 & 2914.
  • 【Comfortable and Convenience】Built-in spanner removes bottom screws and can be slid out from the side without interfering with the attachment of quick release plate. The right-hand side is designed to fit camera handle for the original and comfortable grip feeling.
  • 【Multiple Functions】Both sides and the bottom have strap holes , which works with Hand Strap PAC2456, Wrist Strap PSW2398 and Shoulder Strap PSC2428. Its left side supports Cable Clamp 2981.
  • 【Built-in Quick Release Plate】The cage’s bottom quick release plate for Arca and 1/4""-20 threaded holes allow connecting the original RS2/RSC2/plate for Arca , which can be mounted onto RS 2/ RS C2 /RS 3 / RS 3 Pro q....
Check Stock

NEEWER 200g Gimbal Counterweight, Removable Stackable Counter Weight for Balancing Camera on Gimbal, Compatible with SmallRig DJI RS 3 Pro Ronin-S RS 2 Ronin-SC RSC 2 Zhiyun Camera Gimbal Stabilizer

  • 【Removable & Stackable Counterweight】This NEEWER 200g counterweight is designed to balance your camera on the gimbal stabilizer by adding or combining it on the counterweight plate. Optional 50g and 100g weights are available upon request..
  • 【1/4" Screw & Threaded Hole】Mount to NEEWER ST27 Counterweight Mounting Clamp via 1/4" screw, with 1/4‘’ threaded hole for stacking another counterweight. Note: Only a single 200g counterweight included.
  • The ST27 mounting clamp is sold separately..
  • 【Non Slip Knurled Surface】The counterweight features side knurled surface, making it easy to grip and easy to use when stacking more than one counterweight..
  • 【Stainless Steel Material】 Made of stainless steel, the counterweight is sturdy and rust resistant..
  • 【Easy Gimbal Balancing】Compatible with SmallRig Ronin-SC Counterweight Plate BSS2420 Ronin-S Counterweight Plate BSS2308, and a wide range of other counterweight mounting plates for Zhiyun gimbal stabilizers..
Check Stock

SMALLRIG Grip Handheld Ring for ZHIYUN Crane 3S Handheld Stabilizer - 2858

  • 【FOR ZHIYUN CRANE 3S】The Handheld Ring 2858 is designed to support for Zhiyun CRANE 3S handheld gimbal stabilizer during handheld shooting..
  • 【MULTIPLE MOUNTING POINTS】The connect adapter on the ring features multiple 1/4"-20 threaded holes, and a 3/8"-16 threaded hole for attaching extra accessories such as a Magic Arm 2070, or Monitor Mount 2294. The 25mm rod is compatible with Rod Clamp 1860 for more accessories, such as battery plate and wireless receiver..
  • 【QUICK RELEASE DESIGN】The gimbal itself slots into the ring via a quick release plate with anti-twist design. The entire unit can be disassembled for space saving and transport when not in use. The ring breaks down into multiple parts for storage and transport..
  • 【SUPPORT FEET INCLUDED】 A pair of adjustable support feet are also included for instant setting down of the ring, allowing users to rest between shots..
  • 【SERVES BOTH AS STAND & HANDGRIP】Constructed with lightweight carbon fiber and aluminum, the handheld ring 2858 provides an alternative way of holding your gimbal and facilitates easy transfer from one operator to another..
Check Stock

SMALLRIG Mounting Plates and HDMI Cable Clamp for Atomos Ninja V CMA2338

  • ▶ Multiple Threaded Holes: Both the top plate and the bottom plate are mounted to the monitor by a 1/4’’-20 screw and two locating pins.
  • Multiple 1/4’’-20, 3/8‘’-16 holes and an ARRI locating hole are also provided.
  • ▶ HDMI Cable Clamp Plate:The HDMI cable clamp plate is mounted to the monitor side by two M3 screws.
  • The HDMI cable clamp works with a range of Atomos cables protecting both the cable and port.
  • ▶ Built-in NATO Rail: On the top and bottom plates are integrated NATO rails for quick release of monitor by SMALLRIG Ballhead Arm 2071 or 2072.
  • ▶ Compatibility with Atomos Master Caddy II: For backwards compatibility with Atomos Master Caddy II, this kit also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the its form factor.
Check Stock

1/4-20, 5/16-18, 3/8-16 Threaded Inserts, Wood Inserts, Steel Threaded Inserts for Wood Furniture Screw, HELIFOUNER 143 Pieces 1/4'-20, 5/16'-18, 3/8'-16 Threaded Inserts Kit with Hex Wrench

  • 【Detailed Dimensions】1/4″-20 x 10mm/15mm/20mm/25mm, 5/16″-18 x 13mm/15mm/20mm/25mm, 3/8″-16 x 20mm/25mm, 10 sizes commonly used threaded inserts in a plastic case, different sizes can satisfy your different needs, coarse thread, fit standard 1/4 20 screws bolts and 5/16 18 screws bolts perfectly..
  • 【Color Zinc Plated Steel】Made of high quality carbon steel, color zinc plated on the surface which have good corrosion resistance in bad environment like high temperature, high hardness and perfect wear resistance, standard internal hex socket, without burr, smooth, non-slip, which can ensure long time using..
  • 【Easy To Install】You can drill a hole by using a 9.5mm /12mm /15mm drill bit, ensure a precise 90 degree angle for inserting the threaded inserts, then you need to screw the inserts into the 9.5mm /12mm /15mm holes by using our hex wrench. Make sure you countersink the hole to head size before you insert the threaded sleeve, fit standard 1/4 20, 5/16 18, 3/8 16 screws bolts perfectly..
  • 【Threaded Inserts Assortment Kit】Total 143 pieces 10 sizes threaded inserts are packed in a durable transparent box with label for you. It is easy to distinguish the size of the product, you can choose the suitable one to use in your wood furniture. O....
Check Stock

Glide Gear DEV 10 Professional Video Camera Roller Cine Dolly PRO

  • heavy duty 3/16” thick cnc machined aluminum plate.
  • Built in mitchell plate adapter to attach various bowl sizes.
  • Multiple 1/4 20 & 3/8 threaded holes for mounting.
  • 4 Soft polyurethane wax coated squeak free wheel sets -608Z precision bearings.
Check Stock