Reviews Threaded Hose Crimper

Valterra White Gravity City Water Fill Dish Check Valve RV Trailer Marine

Valterra gravity/city water hook up. This is used for filling the water holding tank with gravity (meaning it does not have a threaded connection) and it has a city water connection to hook up a garden hose..
Parts are constructed with UV stabilized Plastic.
Connects to 1 1/4" ID or 1-3/8" hose for gravity fill, Connect to 1/2" threaded pipe fitting for city connection.
Has connection for air vent with screen 1/2" id hose.

ACCEPT NO IMITATIONS, Mastercool’s US designed A/C crimper has been the standard for over 25 years.
IDEAL FOR SHOP AND FIELD APPLICATIONS, the mobility of the 71500 allows the technician to work directly to repair or fabricate a/c hoses on the....
HYDRAULIC BODY CREATES OVER 10,000 PSI OF PRESSURE allowing technicians to recrimp existing hose assemblies that might have a leak.
MASTERCOOL’S DIES ALLOW FOR AN OE DESIGN 6 SEGMENTED CRIMP to ensure no leaks.
EASY TO USE HYDRAULIC HAND-HELD PUMP crimps the hose fitting in under 10 pumps.

Leakproof hose shut off valve straight shutoff valve manufactured with the highest quality materials.
Rustproof and easy to install shut off valve easy fit for your water hose, bib or spigot.
Easy Control Longer lever and vertical orientation makes for comfortable quick operation.
Metal hose threads for a tight connection.
Practical Design can be directly connected to the threaded hose and threaded faucet.
Leakproof solution connector is equipped with high quality valve for tight closure. Garden hose adaptor effectively prevents any leakage or dripping.

Drain hose continuously drains water from dehumidifier for uninterrupted use.
12 foot hose length can be cut to fit your installation needs.
Universal 3/4" threaded garden hose style coupling allows easy installation.
Place washer inside coupling, screw hose coupling onto dehumidifier or collection pan, and place opposite hose end into drain.
Rubberized 12' drain hose is durable for peace of mind.

...y Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
classAcustoms 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # 12V3 - READ INCLUDED INSTRUCTIONS BEFORE INSTALLATI....

Converts threaded hoses to clamp style hoses.
Fits all 4000, 2500, 2000 and 1500 gallon per hour filter pumps that use threaded hose connections.
Fits chlorine generators and salt systems that use threaded hose connections.
Keep your pump running at top efficiency ..

...embly valve closed, so when you open the faucet the water will flow into the hose.
【3 sizes available】choose the size according to the distance from your fish tank to the sink faucet, flexible water hose length available: 25ft, 33ft, 49ft. The inner diameter of the hose is 1/2 inch. Each pack comes with a 15/16" threaded faucets adapter (large diameter: 23.8mm) , a M21 threaded faucets adapter (large diameter: 21mm), and a 3/4" threaded faucets adapter (large diameter: 26.4mm). So the water changer can be used for most faucets.
【Easy to Install】It's very easy to use, attach the water flow assembly to the faucet. To change water, after connecting the flexible hose to the water flow assembly and the gravel tube, firstly you submerge the gravel tube in the aquarium tank and keep it's orange valve closed, secondly you keep the water flow assembly orange valve open and open the faucet, finally you open the gravel tube valve, the dirty water will be sucked into the hose and flow away.

【ADVANCED FUNCTION】: Break-off screw for permanent attachment.
eliminates back-siphonage into water supply.
anti-backflow valve for most of standard hose and end valves including hose bibs, sillcocks, RV, garden spigot, outside water faucets, hydrants..
【DRAIN HOLE】: Drain hole is able to drain the remained water in the pipe. WARNING :Please keep away from the product when turning off the water, remained water will be sprayed out.
【SPECIFICATIONS】: 3/4 inch female hose threaded inlet × 3/4 inch male hose threaded outlet.
max operating temperature is 180°F/82°C.
【HIGH QUALITY】: Durable brass material stays longer.
Meets ASSE 1011/CSA B64.2, Meets ANSI/NSF 61-9.
【PACKAGE INCLUDES】: 2 × Vacuum Breakers, 4 × Washers, 1 × Tape (About 350″ long) and 1 × Plastic Box.

Dies size: The hose crimping tool has complete dies covering hose sizes 6, 8, 10, 12(5/16, 13/32, 1/2â€, 5/8) and reduced barrier 8, 10, 12(13/32,....
Material: This hydraulic crimping tool is made of aluminum alloy material, ensuring the durability..
Stamper hardness: Stamper hardness can reach up to 53 HRC, making the crimping effect better..
Advantage: This tool is easy to operate and save your time and energy. It is light-weight and compact, suitable for narrow space. Always wear safety....
Application: The hydraulic crimper is ideal for shop and field operations, barbed and beaded hose fittings..